search for: proxy_backup_port

...tname: "" line6_authname: "" ; Line 6 Registration Authentication line6_password: "" ; Line 6 Registration Password # Emergency Proxy info proxy_emergency: "" proxy_emergency_port: "5060" # Backup Proxy info proxy_backup: "10.6.0.223" proxy_backup_port: "5060" # Outbound Proxy info outbound_proxy: "10.6.0.223" outbound_proxy_port: "5060" proxy_register: 1 timer_register_expires : 120 # NAT/Firewall Traversal nat_enable: "1" nat_address: "" voip_control_port: "5060" start_media_port: &q...

...# Proxy Server proxy1_address: "10.150.200.165" # Proxy Server Port (default - 5060) proxy1_port:"5060" # Emergency Proxy info proxy_emergency: "10.150.200.165" proxy_emergency_port: "5060" # Backup Proxy info proxy_backup: "10.150.200.165" proxy_backup_port: "5060" # Outbound Proxy info outbound_proxy: "" outbound_proxy_port: "5060" # NAT/Firewall Traversal nat_enable: "0" nat_address: "" voip_control_port: "5061" start_media_port: "16384" end_media_port: "32766" nat_...

...co 7960 in redundant configuration? I mean I want the phone to be registered with both primary and backup proxy (asterisks) so that service continues to work in case of primary proxy failure. I've set in SIPDefault.cnt: proxy1_address: 192.168.1.10 proxy1_port: 5060 proxy_backup: 192.168.1.12 proxy_backup_port: 5060 The problem is that 7960 registers all the configured lines with primary proxy, but the line 1 only with backup proxy. It's not about registration failure. The phone doesn't even try to register other 5 lines. As a result if the primary proxy fails incoming calls work for the line 1...

...hname: "UNPROVISIONED" ; Line 6 Registration Authentication line6_password: "UNPROVISIONED" ; Line 6 Registration Password # Emergency Proxy info proxy_emergency: "" proxy_emergency_port: "5060" # Backup Proxy info proxy_backup: "" proxy_backup_port: "5060" # Outbound Proxy info outbound_proxy: "" outbound_proxy_port: "" # NAT/Firewall Traversal nat_enable: "1" nat_address: "64.123.190.68" voip_control_port: "5060" start_media_port: "16000" end_media_port: "32768&quo...

I have an *ipphone 7965G* which has to be connected to Asterisk. It has been flashed with SIP firmware but the config file doesn't seem to work maybe I am missing something in it. I appreciate it if you can share your working sample config file with me. Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL:

Anyone have experience with the 3-08-2 release of Cisco's SIP firmware? Are there any new features in the SIPDefault.cnf? Thanks, Ron

...e: "2001" ; Line 6 Registration Authentication line6_password: "phone" ; Line 6 Registration Password # Emergency Proxy info proxy_emergency: "" proxy_emergency_port: "5060" # Backup Proxy info proxy_backup: "192.168.2.1" proxy_backup_port: "5060" # Outbound Proxy info outbound_proxy: "192.168.2.1" outbound_proxy_port: "5060" proxy_register: 1 timer_register_expires : 120 # NAT/Firewall Traversal nat_enable: "1" nat_address: "" voip_control_port: "5060" start_media_port: &...

...t;192.168.1.17" #proxy2_address: "192.168.117.4" # Proxy Server Port (default - 5061) #proxy1_port:"5060" # Emergency Proxy info proxy_emergency: "192.168.1.17" proxy_emergency_port: "5060" # Backup Proxy info proxy_backup: "192.168.1.17" proxy_backup_port: "5060" # Outbound Proxy info outbound_proxy: "192.168.1.17" outbound_proxy_port: "5060" # NAT/Firewall Traversal nat_enable: "0" nat_address: "" voip_control_port: "5061" start_media_port: "16384" end_media_port: "3276...

...ng: 0 ; Default 0 (Disable sending all calls as anonymous) anonymous_call_block: 0 ; Default 0 (Disable blocking of anonymous calls) dtmf_avt_payload: 101 ; Default 101 # Sync value of the phone used for remote reset sync: 1 ; Default 1 proxy_backup: "" ; Dotted IP of Backup Proxy proxy_backup_port: 5060 ; Backup Proxy port (default is 5060) proxy_emergency: "" ; Dotted IP of Emergency Proxy proxy_emergency_port: 5060 ; Emergency Proxy port (default is 5060) # Configurable VAD option enable_vad: 0 ; VAD setting 0-disable (Default), 1-enable nat_enable: 0 ; 0-Disabled (default),...

...oad range for AVT tones - 96-127) dtmf_avt_payload: 101 ; Default 101 # Sync value of the phone used for remote reset sync: 1 ; Default 1 ####### New Parameters added in Release 2.1 ####### # Backup Proxy Support proxy_backup: "" ; Dotted IP of Backup Proxy proxy_backup_port: 5060 ; Backup Proxy port (default is 5060) # Emergency Proxy Support proxy_emergency: "" ; Dotted IP of Emergency Proxy proxy_emergency_port: 5060 ; Emergency Proxy port (default is 5060) # Configurable VAD option enable_vad: 0 ; VAD setting 0-disable (Defa...

Hi everyone, I've been toying with * for quite some time now. I've got two Cisco 7940's with the SIP firmware playing nice with *. I can also make outbound calls via IAXTel (toll-free calls only) and all other calls I have routed out my X100P-clone adapter. Here's my question... Is there a way to capture the inbound callerid from my phone line (coming in on the X100P) and have