search for: progzon

...ries that are aliases to three "behaviours" (North-America, Costa-Rica and the UK). I noticed that the "busy" tone listed for the UK in zonedata.c is different from the one listed as "uk" in dsp.c . The busydetect code in Asterisk's chan_zap uses those aliases for progzone. I noticed that for Israel (at least in Bezeq) progzone=uk seems to detect hangups. Anybody needed to change the dsp.c data to get the hangup detected? What about other countries? E.g: Singapure? -- Tzafrir Cohen icq#16849755 jabber:tzafrir@jabber.org +9...

...lwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes ;echotraining=no group=1 callgroup=1 pickupgroup=1 ;immediate=yes immediate=no callerid = asreceived useincomingcalleridondahditransfer = yes callprogress=yes progzone=us faxdetect=both ;faxdetect=incoming ;faxdetect=outgoing ;faxdetect=no faxbuffers=>6,full

Lilantha, the tones are supposed to be switched using the loadzone and defaultzone lines in /etc/zaptel.conf , and, progzone in /etc/asterisk/zapata.conf. The information about countries and frequencies/times are at zonedata.c located in the sourcecode of zaptel. As you may know, changing zonedata.c information requires a re-compilation of the zaptel module. Hope it helps, Ricardo Poppi. Date: Wed, 5 Oct 2005...

...d=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=no echotraining=yes rxgain=0.0 txgain=0.0 immediate=no busydetect=yes busycount=4 ;busypattern=500,500 ;answeronpolarityswitch=yes ;hanguponpolarityswitch=yes ;callprogress=yes ;progzone=us channel => 3-4 _________________________________________________________________ Mortgage rates as low as 4.625% - Refinance $150,000 loan for $579 a month. Intro*Terms http://www.NexTag.com

...(United States / North America) dahdi_echocan_mg2: Registered echo canceler 'MG2' dahdi: Registered tone zone 4 (United Kingdom) /etc/asterisk/chan_dahdi.conf ----------------------------- [channels] language=en usecallerid=yes cidsignalling=v23 sendcalleridafter = 2 rxgain=2.0 txgain=3.0 progzone=uk signalling=fxo_ks callerid=asreceived group=0 context=inbound-dahdi channel => 1 callerid= group= context=inbound-dahdi /etc/asterisk/dahdi-channels.conf --------------------------------- ; Autogenerated by /usr/sbin/dahdi_genconf on Thu May 27 13:25:14 2010 ; If you edit this file and exec...

...the peer phone ring, when the peer answer, asterisk hangup the call, or say busy. This is my conf: zaptel.conf: --------- loadzone = es defaultzone=es fxsks=1 zapata.conf ---------- [channels] signalling=fxs_ks busydetect=yes answeronpolarityswitch=yes hanguponpolarityswitch=yes callprogress=yes progzone=es context = contexto group = 1 channel => 1 And this is the asterisk log: -- Executing Dial("SIP/200-4803", "ZAP/1/966736800|90") in new stack -- Called 1/966736800 -- Hungup 'Zap/1-1' == Everyone is busy/congested at this time (1:0/0/1) -- Execut...

Hi all! I'm configuring a digium tdm card in Costa Rica, every things works well, but calls don't hangup. I've tested setting up progzone=br but dont work. Thanks for any help. Cheers! -- Gustavo A. Gonz?lez Dto. Telefon?a VoIP Despegar.com 54 (11) 5032-3500 ext. 3512

...ing. If i specify busypatten=500,500 then asterisk does not recognize hang up signal. After removing it only all are working fine. I choosed 2nd option as per your suggestions. working chan-dahdi.conf: ==================== signalling = fxs_ks busycount = 3 busydetect = yes callprogress = yes progzone=in usecallerid=yes cidstart=ring callerid=asreceived group=0 context=from-pstn channel => 1 Caller id Detection : I have PSTN line with caller id display. After the 2nd ring, caller id display phone shows caller id. Can you guide me on right to get it in asterisk. I am getting following er...

...es hidecallerid=no cidsignalling=bell callwaiting=no usecallingpres=yes callwaitingcallerid=yes threewaycalling=no transfer=yes canpark=yes cancallforward=no callreturn=no musiconhold=default echocancel=yes echocancelwhenbridged=yes immediate=no faxdetect=no relaxdtmf=yes hanguponpolarityswitch=yes progzone=us signalling=fxs_ks channel => 1 Any suggestions for voicemail detecting/rejecting messages when there is only dialtone on the other end? Thanks! S.

...1.4.33.1 dahdi-linux-complete-2.3.0.1+ 2.3.0 OS => Debian-lenny 5 users.conf ------------- [trunk_1] trunkname = pstn ; GUI metadata busydetect = yes busycount = 3 busypattern = 480,620 ringtimeout = 8000 answeronpolarityswitch = no hanguponpolarityswitch = no callprogress = no progzone = in usecallerid = yes cidstart = ring pulsedial = no cidsignalling = v23 flash = 750 rxflash = 1250 mailbox = callerid = asreceived dahdichan = 1 context = DID_trunk_1 group = 1 hasexten = no hasiax = no hassip = no registeriax = no registersip = no trunkstyle = analog disallow = all allow = all...

...fault usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no progzone=us tonezone=0 jbenable=yes ;Sangoma AFT-A200 [slot:4 bus:5 span:1] <wanpipe1> context=default group=0 echocancel=yes signalling=fxs_ks channel => 1 context=default group=0 echocancel=yes signalling=fxs_ks channel => 2 dahdi show version DAHDI Version: 2.1.0.4 Echo Canceller: MG2 d...

...256(32ms),512(64ms),1024(128ms) echocancel=yes echotraining=yes echocancelwhenbridged=no rxgain=0 txgain=0 group=1 callgroup=1 pickupgroup=1 immediate=no faxdetect=incoming ;busydetect=yes ;busycount=10 answeronpolarityswitch=yes hanguponpolarityswitch=yes polarityonanswerdelay=600 ;callprogress=no progzone=es channel => 1 zaptel.conf: loadzone=es defaultzone=es fxsks=1 sip.conf: [general] context=default bindport=5060 bindaddr=0.0.0.0 srvlookup=yes [101] type=friend secret=some qualify=yes nat=no host=dynamic canreinvite=no context=SOME [102] type=friend secret=some qualify=yes nat=no host...

...lplan=unknown priindication=outofband signalling=pri_net usecallerid=yes cidsignalling=v23 hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes callgroup=1 pickupgroup=1 immediate=no overlapdial=yes progzone=uk resetinterval=43200 group=1 channel => 1-15 channel => 17-31 Here is my /etc/zaptel.conf :- loadzone=us defaultzone=us span=1,0,0,ccs,hdb3,crc4 bchan=1-15,17-31 hardhdlc=16 span=2,0,0,ccs,hdb3,crc4 bchan=32-46,48-62 hardhdlc=47 The second span is not used and just has a loopback plug c...

...detection=no usecallerid=yes cidsignalling=v23 cidstart=polarity hidecallerid=no callwaiting=no usecallingpres=no sendcalleridafter=1 callwaitingcallerid=no threewaycalling=no transfer=no cancallforward=yes callreturn=no echocancel=yes echocancelwhenbridged=no rxgain=0.0 txgain=0.0 immediate=no progzone=uk ; module 0 on card is an FXS signalling=fxo_ks language=en context=sip channel => 1 ; module 1 on card is an FXS signalling=fxo_ks language=en context=sip channel => 2 ; module 2 on card is an FXO signalling=fxs_ks language=en context=faris channel => 3 zaptel.conf fxoks=1...

...# zapata.conf [channels] group = 0 context = incoming-POTS signalling = fxs_ks rxgain=10.0 txgain=6.0 echocancel=yes echocancelwhenbridged=no echotraining=300 immediate=no busydetect=no busycount=5 answeronpolarityswitch=yes hanguponpolarityswitch=yes callprogress=yes callwaiting=yes relaxdtmf=no progzone=uk useincomingcalleridonzaptransfer = yes usecallerid=no callerid=asreceived cidsignalling=v23 cidstart=polarity ukcallerid=yes channel => 4 # sip.conf [general] allow=ulaw allow=alaw allow=gsm allow=g723.1 context=incoming recordhistory=yes port=5060 bindaddr=0.0.0.0 srvlookup=yes tos=lowdela...

...elaxdtmf=yes ; ; You may also set the default receive and transmit gains (in dB) ; rxgain=0.0 txgain=0.0 callgroup=1 pickupgroup=1 immediate=no ; This feature can also easily detect false hangups. The symptoms of this is ; being disconnected in the middle of a call for no reason. ; callprogress=yes progzone=be ; For fax detection, uncomment one of the following lines. The default is *OFF* ; We use NVFaxDetect stuff for this ; ;faxdetect=both ;faxdetect=incoming ;faxdetect=outgoing ;faxdetect=no group=1 signalling=bri_cpe context=isdn channel => 1,2,4,5,7,8,10,11,13,14,16,17,19,20,22,23...

...his problem and make it work anyway. This is the zapata.conf for the FXO port: [channels] ; hardware channels ; default usecallerid=yes hidecallerid=no callwaiting=no threewaycalling=yes transfer=yes echocancel=yes echotraining=yes immediate=no flash=100 hanguponpolarityswitch=yes callprogress=yes progzone=nl busydetect=yes busycount=4 language=nl ; define channels context=binnenkomend signalling=fxs_ks channel => 1 ; pstn attached to port 1 This is the Dialplan fragment: exten => _87.,1,Wait(0.5) exten => _87.,n,Dial(Zap/1/${EXTEN:2},30,rtT) exten => _87.,n,Macro(fastbusy) exten =&g...

Morning list, Was curious if it is possible to decrease the time asterisk takes to answer an incoming call to a zaptel interface. Example: [Jun 11 09:33:06] VERBOSE[4489] logger.c: -- Starting simple switch on 'Zap/2-1' [Jun 11 09:33:10] NOTICE[4489] chan_zap.c: Got event 18 (Ring Begin)... [Jun 11 09:33:12] NOTICE[4489] chan_zap.c: Got event 2 (Ring/Answered)... [Jun 11 09:33:12]

Hi to all, I'm using a TDM22B. When i establish an external call to the PSTN through an FXO port, I'm not able to know the status of the call (no answer, busy, ...). If I enable call progress (callprogress=yes) in Zapata.conf, I am able to detect the no answer state but if the callee on the PSTN answers the call asterisk doesn't detect that and it jumps to the NOANSWER state and

...threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes callgroup=1 pickupgroup=1 immediate=no protocolclass=mfcr2 protocolvariant=ar,20,4,3 protocolend=co group=1 channel=>1-15 channel=>17-31 busydetect=yes busycount=4 callprogress=yes progzone=us ------------------------------------------------------- -- ======================== Gerardo Perosio Laufquen Internet tel: 4867 3500 ========================