search for: progress_indicator

All, I need to run this by everyone and see if someone has any idea's. I have a asterisk server setup and currently am receiving the inbound calling number where the name should be. My setup is.... One pri terminating into a Cisco 2431 router Sip messages from the Cisco get sent to a asterisk server linksys ata's a each remote end. I can receive the calling name if the call originates

Hello, everyone. Right now, we are trying launch our own PBX system based on Asterisk(Fedora) with Cisco 2611. Cisco has 2 port FXO card installed on it. For testing, I have 2611 hooked into phone line with number of xxx-xxx-xxxx fine. (I'll call it F). Using softphone, I can dial in extension 1001 on asterisk, which should talk to cisco. After initial connection to Asterisk, I have try to

I have asterisk 1.6.2.11 talking to a cisco 1760 running ipvoicek9-mz.124-25b. whenever a call goes through the 1760's FXO or FXS (in or out) there is a 915 second maximum call time due to asterisk hanging up the call because of a "critical packet" being missed. I read doc/sip-retransmit.txt and I don't see anything there that is helpful to my situation - the asterisk box is

I wouldn't expect you to be using RFC3389 if your using A-law, can you include your IOS version and IOS config file ... I have not specified any allow's or disallow's in my * config for the codecs with my 5300, I also use Cisco 79xx phones and I use the option within the phones config file to select the preffered codec and when I change this to G.729/A-law/U-law all works perfectly

HI, I have been pulling my hair out trying to get a Cisco MC3810 to interface my Asterisk box with a T1. I am able to make outgoing calls but incoing calls never reach my Asterisk box. The cisco give a fast busy when I try to call one of the DID's. When playing around with the dial-peers I can get the cisco to pick up the call, but then it forwards the call back to the ANI that is dialing.

Hello, Has anyone experienced a segmentation fault in asterisk for using G729 against an AS5300 in SIP ? I'm having this problem. Also, any other codec I use gives me incompatible media (can be read in SIP DEBUG messages). AS5300 configured for multiple codecs, so is Asterisk. Tried G711u/A G723 and G.729. Any clues ? Regards, Jorge A. Info: Asterisk ver 1.0.7 stable Using AMPortal

Hello, I've got an ISDN PRI circuit terminating in a Cisco AS5350, which in turn is talking to an Asterisk server via SIP for call origination and termination. Seems simple enough, and it works for the most part, but: 1) Caller ID name data comes in on the PRI, but doesn't appear to get handed off to the Asterisk server via SIP, at least not in any format that Asterisk

Hey guys, I am trying to pass the parameters for the file being upload, but the params[] are not being passed. Ive read through some posts and realize this is an issue with RoR. I read through some of the posts and someone suggested using: http://svn.kylemaxwell.com/form_remote_upload/trunk/ I tried to install it, and although I thought I installed it correctly, it doesn''t work.

Im sure this has been thrown around this list 1,000 times, and Im sure its been around the net too.. But I have done everything, and cannot seem to get inward calls to be processed on my asterisk box.. First, Let me tell you what works: 1) Softphones (ZoIPer using IAX2 Protocol) Can make calls behind a Natted Firewall to the FXS Port, and it rings, and calls work full duplex. 2) Soyo IP Phone

Hi I have asterisk ip-pbx on my network, with some grandstream ip phone and i have cisco gateway that is connetced to VOIP service providers . Cisco is 3700 series and is using H323 . i have compiled H323 on asterisk . now i want to make a call from ip phone that is registerd to asterisk , and route call to VOIP provider so this call should goes to teh cisco from asterisk and then

Hello, We have a DID partner sending traffic to Asterisk via SIP, but we are not hearing ringtones. When we call the same extension via SIP, we can hear that's it"s ringing (virtually).. Is is something related with call-progress not recognized by DID provider ? Thanks, ________________________ a b d o u l aba at gcomnetworks.com SIP: (131) 229-1002 at sip.freeipcall.com

Hi i am search a sample config (for asterisk and for cisco) for connect a cisco 1760 with a FXO card to my asterisk. Thanks for your help Jerome

Calling from a Cisco FXO port to an ATA-186 (SIP 3.1 image) via * (either CVS-HEAD-06/28/04-11:43:41 or CVS-HEAD-07/12/04-15:49:58) I didn't hear any ringing sound & get the following on the console: -- Called 5503 -- SIP/5503-f6b5 is ringing WARNING[-1323201616]: channel.c:1375 ast_indicate: Unable to handle indication 3 for 'SIP/10.10.2.250-9903' -- SIP/5503-f6b5 answered

I just inherited a Cisco 2621 with a VWIC-1MFT-T1 card in it. Can I make this thing into MGCP gateway or even a SIP gateway for asterisk? Seems like it should bee useful for something! I'm perfectly happy to do my homework, but also don't feel thee need to reinvent the wheel! So, links with relevant info would be appreciated. If there is a config for a 2621 being used as a gateway