search for: prnt

...tion value="1" selected="selected">David</option> <option value="2">Sam</option> <option value="3">Tobias</option> </select> I have the following code in a _form.rhtml file: <%= select("category", "prnt_id", Prnt.find_all.collect {|p| [p.name, p.id]}, { :selected => ''prnt_id'' == @category.prnt_id, :include_blank => false } ) %> The drop down is created with the correct content, but is does NOT select the currently set value. The value is set if I use any other typ...

...Direct-Access ANSI SCSI revision: 02 Mar 11 11:30:22 l_l_box scsi.agent[17229]: disk at /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/host2/target2:0:0/2:0:0:0 sg3-utils are also installed on the system but sg_scan -i returns nothing Output of /proc/bus/usb/devices T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.9-5.0.3.EL uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=0000:00:1d.2...

...chine and do: rmmod ohci_hcd modprobe ohci_hcd Then the system will be good from anywhere to a few hours to a week when this occurs again. I am running an up to date Centos 4.2 albeit with the 2.6.9-27 SMP kernel. Here are the devices on the USB: # cat /proc/bus/usb/devices T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 4 B: Alloc= 27/900 us ( 3%), #Int= 2, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.9-27.ELsmp ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:02:00.0...

...Linux 2.4.17-ll-dhs3 i686 INPUT devices: /proc/bus/input/devices not available INPUT handlers: /proc/bus/input/handlers not available PCI Status for kernel: Linux 2.4.17-ll-dhs3 i686 PCI up; bus count is 3 USB Status for kernel: Linux 2.4.17-ll-dhs3 i686 USB up; bus count is 2 T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 P: Vendor=0000 ProdID=0000 Rev= 0.00 I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 P: Vendor=0463 ProdID=ffff Rev= 0.01 I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 P...

.../newhidups -DDDDD auto Network UPS Tools: New USB/HID UPS driver 0.23 (2.0.2) debug level is '5' Opening new device (0000/0000) Opening new device (09AE/0001) Opening new device (0000/0000) found 0 (-1) No USB/HID UPS found stuart@tyro:~+ cat /proc/bus/usb/devices=20 T: Bus=3D02 Lev=3D00 Prnt=3D00 Port=3D00 Cnt=3D00 Dev#=3D 1 Spd=3D12 MxC= h=3D 2 B: Alloc=3D 0/900 us ( 0%), #Int=3D 0, #Iso=3D 0 D: Ver=3D 1.10 Cls=3D09(hub ) Sub=3D00 Prot=3D00 MxPS=3D 8 #Cfgs=3D 1 P: Vendor=3D0000 ProdID=3D0000 Rev=3D 2.06 S: Manufacturer=3DLinux 2.6.10 uhci_hcd S: Product=3DIntel Corp. 82801...

...ce 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 051d:0003 American Power Conversion UPS Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub joavma01:/usr/local/ups/bin # usb-devices T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev=02.06 S: Manufacturer=Linux 2.6.32.54-0.3-default ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:02:03.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I:...

...terruptible Power Supply Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub ============================================= usb-devices returns this: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev=03.10 S: Manufacturer=Linux 3.10.0-693.el7.x86_64 ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:02:01.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I:...

...terruptible Power Supply Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub ============================================= usb-devices returns this: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev=03.10 S: Manufacturer=Linux 3.10.0-693.el7.x86_64 ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:02:01.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I:...

...erruptible Power Supply Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub ============================================= usb-devices returns this: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev=03.10 S: Manufacturer=Linux 3.10.0-693.el7.x86_64 ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:02:01.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I:...

Hi. Is the subject UPS model supported? I believe so, but I don't have a unit to test with. Any comments on this model? I'm trying to advise a colleague. Thank you, as always. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=051d ProdID=0003 Rev= 1.06 S: Manufacturer=American Power Conversion S: Product=Smart-UPS 1200 FW:UPS 09.2 / ID=20 S: SerialNumber=AS1203239749 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=...

Hello, I have an UPS Hunnox HNX-650 (http://www.hunnox.com/), but it's not quite running yet with NUT. Any hints? Thanks... Some info: * lsusb: Bus 005 Device 003: ID 0001:0000 Fry's Electronics * usb-devices: T: Bus=05 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 3 Spd=1.5 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0001 ProdID=0000 Rev=01.00 S: Product=MEC0003 C: #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 2 Cls=03(HID ) Sub=00 Prot=00 Driver=(none) * Test using nutdrv_qx -D...

i can't seem to get newhidups to detect my UPS.. i'm using nut-2.0.3 (tried both the rpm from fc5-updates and compiling my own) here is the entry for the UPS in /proc/bus/usb/devices T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0764 ProdID=0501 Rev= 0.01 S: Manufacturer=CPS S: Product=UPS BF700 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 50mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid E:...

...6.13 smp - gcc version 4.0.2 20050901 (prerelease), glibc-2.3.5-40 - mgeups-psp-3.0.0-3, nut-2.0.2-4 - Dell Dimension 8400 with dual core Intel Xeon. 3.0GHz. lsusb shows: Bus 002 Device 003: ID 0463:ffff MGE UPS Systems UPS less /proc/bus/usb/devices shows for bus 2 device 3: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0463 ProdID=ffff Rev= 0.01 S: Manufacturer=MGE UPS SYSTEMS S: Product=ellipse C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 20mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=...

...n control various UPS brands. I've seen reference on Google to it working specifically with Starpower and UPguardS UPS devices as well as the Kebo ones. I have been able to get Linux to detect the USB device. Catting /proc/bus/usb/devices provides the following output: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.10-1.770_FC3smp uhci_hcd S: Product=UHCI Host Controller S: SerialNumber=00...

...= 7 bDescriptorType = 05 bEndpointAddress = 81 (in) bmAttributes = 03 (Interrupt) wMaxPacketSize = 0008 bInterval = 14 -------------------------------------------------- cat /proc/bus/usb/devices: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 4 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB OHCI Root Hub S: SerialNumber=f88bb000 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt=...

...---------------- My ups.conf file contains ----------------- cat ups.conf -------------------- user = nut [pw3105] driver = bcmxcp_usb port = auto ---------------------------------------------- Other related information ----------- cat /proc/bus/usb/devices -------------------- T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 6 Spd=1.5 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0592 ProdID=0002 Rev= 0.80 S: Manufacturer=Powerware S: Product=Powerware UPS C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 2mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=...

...2010/02/28 19:02:47, 0] lib/util_sock.c:1491(get_peer_addr_internal) getpeername failed. Error was Transport endpoint is not connected read_fd_with_timeout: client 0.0.0.0 read error = Connection reset by peer. /var/log/messages ------------------ Feb 28 18:39:20 (none) user.err OfficeJetG85: prnt/hpijs/hpcups.cpp 681: hpcups: returning status 0 from main Feb 28 18:39:29 (none) daemon.err hp[17826]: io/hpmud/mlc.c 135: unexpected MLCCreditRequest: cmd=4, hid=2, pid=2, credit=65535 /var/log/cups/error_log ----------------------- I [28/Feb/2010:18:38:06 +0400] Started "/usr/local/lib/cup...

Ok, I installed the ups, and installed nut, and /proc/bus/usb/devices says this T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=06da ProdID=0002 Rev= 0.01 S: Manufacturer=POWERWARE S: Product=Powerware UPS C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 20mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)...

Hi, I have plug in this USB network device: > Bus 001 Device 002: ID 2001:1a02 D-Link Corp. > T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 > D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=2001 ProdID=1a02 Rev= 0.01 > S: Manufacturer=D-Link > S: Product=DUB-E100 > S: SerialNumber=E5ECEB > C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=200mA > I:*...

...1 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub [root at norman ~]# usb-devices T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev=03.10 S: Manufacturer=Linux 3.10.0-229.20.1.el7.x86_64 ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:1c.3 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0m...