search for: prips

Thx, prips works as I expected, gr8 tool, not available in Gentoo repository but after compilation Dovecot doing what I wanted. Regards, Jack 2017-11-09 21:19 GMT+01:00 Gedalya <gedalya at gedalya.net>: > A bit clunky but perhaps you could find another command. > > https://packages.debian.org...

Hi, I would like to prepare postlogin a script that allow imap connection to roundcube for all but restrict imap access for selected users. My question is that: Is possible in condition IF use IP addresses as range or with mask (because I've more than one web servers) ? My script: #!/bin/sh if [ "$IP" = "172.11.0.28" ] ; then printf "* [ALERT] Access allowed from

I''m trying to pass my SATA controller through to a domain and have run into a weird situation. I have two machines with the same general class of hardware (Intel PIIX) and the pass-through works on one machine but not the other. On the non-working system, the SATA controller makes port reads, but they don''t return the correct values. For example, when running it in dom0, when

...debian.org/stretch/netmask $ IP=172.11.0.28 $ if [ "$(netmask -n $IP/24)" == "???? 172.11.0.0/24" ]; then echo OK; fi OK $ IP=172.12.0.11 $ if [ "$(netmask -n $IP/24)" == "???? 172.11.0.0/24" ]; then echo OK; fi $ Range: https://packages.debian.org/stretch/prips $ IP=172.11.0.28 $ if prips 172.11.0.11 172.11.0.55 | grep $IP; then echo OK; fi 172.11.0.28 OK $ IP=172.11.0.66 $ if prips 172.11.0.11 172.11.0.55 | grep $IP; then echo OK; fi On 11/09/2017 11:12 AM, j.emerlik wrote: > Hi, > I would like to prepare postlogin a script that allow imap conne...

I am running centos 5.2 i686. The /boot/config indicates that VIA82CXXXX is built into the kernel. CONFIG_BLK_DEV_VIA82CXXX=y my lspci -v gives 00:0f.0 IDE interface: VIA Technologies, Inc. CX700M2 IDE (prog-if 8a [Master SecP PriP]) Subsystem: VIA Technologies, Inc. Unknown device 0581 Flags: bus master, medium devsel, latency 32 I/O ports at fc00 [size=16]

Please can you do an ''lspci -nv'' to find out the exact version of your controller. I''m wandering whether it features in pci/quirks.c and whether the fixup code is borked on Xen. Also, have you tried fiddling around with any of the BIOS IDE legacy mode settings? There really is no good explanation for a) why the MMIO region is so low on native, and b) why it is

CentOS 4.3 (fully updated, including CentOS Plus kernel). Running KDE 3.5.2 (fully updated from redhat.kde repo). I can't seem to get the OS to recognize my SD card when inserted into my USB card reader. Mepis 6 Beta 3 has no problem with it. DMESG sees nothing happening when the card is inserted. USB-STORAGE module is loaded.

I recently moved my CentOS 4.5 disk from a Lenovo ThinkCentre M52 (3.2 GHz Pentium 4) to a Lenovo ThinkCentre M55 (3.4 GHz Core 2 Duo). I had to install the SMP kernel, but other than that everything just worked. I did have an issue with accidentally initializing my /boot partition, but that was my own fault. But the system was not feeling right. Some things just seemed to be slower,

On 31/08/05, Ian Pratt <m+Ian.Pratt@cl.cam.ac.uk> wrote: > Please can you try searching for bios updates etc. I have an almost > identical pre-release Dell machine that Xen works fine on. A00 came installed and is the latest. > Please can you post the ouput of ''lspci -v''. My sata controller is a rev > 03, prog-if 8f, ''Unknown device 5656''

Hi folks, I have an HP Proliant 140DL G2 server with what appears to be an IDE drive in non-DMA mode. Performance on the server is extremely bad when large amounts of disk activity is taking place. I think the problem is that my drive is not in DMA mode: # hdparm /dev/hda /dev/hda: multcount = 16 (on) IO_support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 0 (off)

When I use my phone to make VOIP call and another calls comes from POTS my phone rings to POTS caller. Why? Shouldn't it generate busy signal! -- #Joseph

Several people already reported this at linux-kernel and elsewhere with no answers, I thought perhaps this would be a more adequate forum... [1.] One line summary of the problem: After I/O, journal is aborted and filesystems made read-only. [2.] Full description of the problem/report: One can't anymore write to the affected file systems. Upon investigation, ext3fs journal was aborted

Hi, The following 4 patches enable direct device assignment (PCI passthru) for HVM guest on AMD IOMMU platforms. Please apply them against C/S 16491 as the named order. To enable AMD IOMMU, please add "enable_amd_iommu" as xen boot parameter. 1-cleanup.patch: code cleanup, bug fix, minor enhancements to existing amd-iommu codes. 2-passthru-amd.patch: passthru support, modifications to

Hello List, I'm hoping someone else out there has an Asus DSBF-DE server board, and can tell me if anything special needs to be done to get ports 5 and 6 of the onboard SATA to work under Centos 5.1 x64. I have drives on 1 through 4 that are detected and working properly, however, a drive on 5 is not detected, from what i can tell, the kernel doesn't even see phy's for ports 5 and 6.

While doing this on an 80gig ibm ide drive: dd if=/dev/cdrom of=cd.iso I got the following assertian failure Aug 9 14:43:27 budder kernel: Assertion failure in __journal_remove_journal_head() at journal.c:1733: "jh2bh(jh) == bh" Aug 9 14:43:27 budder kernel: kernel BUG at journal.c:1733! Aug 9 14:43:27 budder kernel: invalid operand: 0000 Aug 9 14:43:27 budder kernel: CPU: 0 Aug 9

Hi, I've been playing with a TE120P on Asterisk 1.4.18 with zaptel 1.4.9 and I've ran into an issue. After a call placed any DTMF tone causes the server to lock up entirely. Calls placed work just fine (except for a problem with echo cancellation). The phone registered to the server is a Linksys SPA-942. I am seeing in zttool some IRQ misses, but it never seems to go above 74 (below).

Hi [1.] One line summary of the problem: rsync segfaulting and the kernel oops'ing while synchronizing two smbfs's [2.] Full description of the problem/report: I am implementing file synchronization between two Windows NT 4 machines through two smbfs mounts. Rsync runs for about half an hour; then the kernel gives an oops and rsync segfaults. Hereafter the smbfs file system is

Hi, My asterisk server was working with a 4-FXO analog card (TDM400P). I recently added two digital cards: a TE120P (1 PRI) and a B410P (4 BRI). The B410P is still unconfigured but inserted in a PCI slot. The TE120P's jumper is set to E1 as it will connect to a commercial PBX's PRI card also configured as E1. My analog channels used to be 1-4 but since I added the new cards I changed

Hi, The following error message appeared in syslog while the filesharing client overnet was running and writing to the disk. I first only noticed that suddenly Opera was frozen and no new terminals could be started. Regards W. Pichler syslog Jun 15 13:15:34 pc kernel: Unable to handle kernel NULL pointer dereference at virtual address 0000000e Jun 15 13:15:34 pc kernel: printing eip: Jun

Helo, I have problem with Digium TE110P connected to CISCO 3640 (port on NM-HDV-2E1-60) wth PRI E1 link. I use CISCO now for testing but when I tried with real PBX problem was exactly same. I have this messages in Asterisk conole and log sometimes: NOTICE[1115] chan_zap.c: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Usually 2-5 such messages in series, can be repeated after 10