search for: prewink

...ess this is a function of an unclean hangup (being read as a flash instead of a hangup?). A 'soft hangup zap/27-1' will not do anything (though it makes an attempt). Does shortening the rxflash time sound like it may help this? (Does anyone have a good explanation, or link to one, of the prewink, wink, preflash, flash, start, rxwink, rxflash, debounce timing functions?) Thanks, as always... Steve

Does anyone know the default E&M Wink timings for Nortel DID ports? The default settings on Asterisk are: ; prewink: Pre-wink time (default 50ms) ; preflash: Pre-flash time (default 50ms) ; wink: Wink time (default 150ms) ; flash: Flash time (default 750ms) ; start: Start time (default 1500ms) ; rxwink: Receiver wink time (default 300ms) ; rxflash: Receiver fl...

...ontext, and we have no problems dialing in on the ADIT, so I don't believe it's a problem with extensions.conf, or "immediate=no" in zapata.conf. I'm thinking it must have something to do with timing/timeouts of winks and digits, but don't understand how the parameters (prewink, rxwink, wink, start, etc.) apply to the various times in the actual call setup process. >From logs of it plugged into another E&M wink device, we see the following timings when it tries to dial: 0 ms - WINK starts 300 ms - WINK ends 1000 ms - digit 1 1150 ms - digit 2 1300 ms - di...

...=1-4 defaultzone=us loadzone=us [channels] context=from-internal-receiver ; Points to the default context of your extensions.conf language=en faxdetect=none usecallerid=yes callerid=asreceived threewaycalling=yes transfer=yes signalling=featd ; FXS for ringing phones group=0 flash=350 rxwink=300 prewink=20~~ echocancel=no ; You can set this to 32, 64, or 128, tweak to your needs. echocancelwhenbridged=no immediate=no channel => 1-24 signalling=pri_cpe ; pri_cpe = PRI slave ; pri_net = PRI master switchtype=national pridialplan=unknown echocancel=yes ; You can set this to 32, 64, or 128, tweak...

I'm having problems with unclean hangups (being read as a flash instead of a hangup?). Can I turn off hook flash recognition in asterisk, but still have the flash button on the analog phone operational? Could I use these settings in zapata.conf to fix my problem? *prewink*: Sets the pre-wink timing. *preflash*: Sets the pre-flash timing. *wink*: Sets the wink timing. *rxwink*: Sets the receive wink timing. *rxflash*: Sets the receive flash timing. *flash*: Sets the flash timing. *start*: Sets the start timing. *debounce*: Sets the debounce timing. "The debounce...

Hi, Is there any documentation on the fields prewink, preflash, wink, flash, rxwink, rxflash, start and debounce in zapata.conf? The "Recall" button on my phone doesn't seem to trigger a transfer via my shiny new TDM40B. However, tapping the hook does, but only if I tap it for long enough. Presumably the "Recall" button's...

...tings [zapata.conf] [channels] context=from-internal-receiver ; Points to the default context of your extensions.conf language=en faxdetect=none usecallerid=yes signalling=featd ; FXS for ringing phones callerid=asreceived group=0 threewaycalling=yes transfer=yes flash=350 ;rxflash=350 rxwink=300 prewink=20~~ echocancel=no ; You can set this to 32, 64, or 128, tweak to your needs. echocancelwhenbridged=no immediate=no channel => 1-24 signalling=pri_cpe ; pri_cpe = PRI slave ; pri_net = PRI master switchtype=national pridialplan=unknown echocancel=no ; You can set this to 32, 64, or 128, tweak...

We are having line noise issues in our Asterisk to legacy PBX integration. All SIP calls originating from IP phones sound crystal clear. All calls that originate from the legacy PBX (Isoetec 228) and route through the Asterisk and out SIP have a lot of line noise. I believe I have it pinned down to these Blue Alarm errors that I can see on the legacy PBX side. zttool shows no alarm but when I

...ace (1-way) ; sf_tx: Transmit audio/PTT on an SF interface (1-way) ; sf_txrx: Receive audio/COR AND Transmit audio/PTT on an SF interface (2-way) ; sf_rxtx: same as sf_txrx (for our dyslexic friends) ; signalling=fxo_ls ; ; A variety of timing parameters can be specified as well ; Including: ; prewink: Pre-wink time (default 50ms) ; preflash: Pre-flash time (default 50ms) ; wink: Wink time (default 150ms) ; flash: Flash time (default 750ms) ; start: Start time (default 1500ms) ; rxwink: Receiver wink time (default 300ms) ; rxflash: Receiver fl...

...ace (1-way) ; sf_tx: Transmit audio/PTT on an SF interface (1-way) ; sf_txrx: Receive audio/COR AND Transmit audio/PTT on an SF interface (2-way) ; sf_rxtx: same as sf_txrx (for our dyslexic friends) ; signalling=fxo_ks ; ; A variety of timing parameters can be specified as well ; Including: ; prewink: Pre-wink time (default 50ms) ; preflash: Pre-flash time (default 50ms) ; wink: Wink time (default 150ms) ; flash: Flash time (default 750ms) ; start: Start time (default 1500ms) ; rxwink: Receiver wink time (default 300ms) ; rxflash: Receiver fl...

...= callerid=asrecieved usecallerid=yes hidecallerid=no restrictcid=no usecallingpres=no [Audio Quality Options] relaxdtmf=no echocancel=yes echocancelwhenbridged=yes echotraining=yes rxgain=0.0 txgain=0.0 [Call Logging Options] accountcode=slmindustries amaflags=documentation [Timing Parameters] ;prewink= ;preflash= ;wink= ;rxwink= ;rxflash= ;flash= ;start= ;debounce= [Other Features] mailbox=4000 ; channel => 1-23 group = 1 [mrottler] context=mrottler [Call Logging Options] accountcode=mrottler amaflags=documentation [Caller ID Options] callerid="SLMI - M. Rottler <317 123-4567>&...

Help. Why is it that I can call out from my GSBudgetone SIP phone but the audio is "one-way'? Why is it that when I call my asterisk phone number, I get a fast busy?