search for: powermanager

Hi! What is the current status of support for PowerNow! and Speedstep? As I remember there were rumors, that those techniques were just supported for dom0, meaning that all the guests would run slow if dom0 idles. Is there already a solution for this implemented (in the unstable-tree), so that guests do also influence power-state? If so, does it also work with dualcore-cpus or is it better

...;ll study in depth the thread this week end, and complete with my thoughts, - thanks to Stan to have put us all in touch Arnaud 2006/3/10, Stanislav Brabec <sbrabec@suse.cz>: > Hallo NUT developers. > > In last days, I have learned a much about UPSes, NUT, udev, HAL and > D-BUS, powermanager and found some ideas for a new design of NUT. > > My original question was: How to inform desktop users about failing > power. > > The research shows, that there are two disconnected infrastructures - > one is NUT, second is powermanager. One was originally designed for UPS > m...

With some progress in PowerManagement support (there's a patch nearly done for reading the P-tables, written mostly by xexaxo, derived from thunderbirds nvclock, with 0x40 adjustments from myself) in my opinion it's time to think about the user aspect of this. My personal idea for GPU scaling was similar to that of CPU scaling in appearance eventually. When you look at the cpufreq-applet

Hi, I'm trying to configure my ups with nut which is a locally made one. It uses a rs232 port to talk to the computer and comes with a software called "Powermanager Lite" which is provided by Richcomm and supports Windows, Linux and UNIX. According to the manual it uses the Richcomm circuitry to talk to the computer and uses a drycontact protocol. Unfortunately I couldn't find any driver for Richcomm serial interface, there's a richcomm_usb howeve...

> Red Hat Enterprise Linux 6 also introduces diskdevstat for monitoring > disk operations and netdevstat for monitoring network operations. How could I monitor disk operations under CentOS 5? The quote is from RHEL 6 release notes http://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/6/html/6.0_Release_Notes/powermanagement.html - Jussi

Hi all, I was just installing centos 5 on my new dv9000 hp laptop. Installed fine. on first boot, I got through welcome, firewall, selinux was on date time screen and did Forward to goto next screen (Create User) and the machines locks up. can ping any more or anything.... Any ideas? Jerry

Hi List, I'm running Centos 5.2 on an Pentium III-1000 The box has been running for almost a year without any (hardware) issues. SInce a few weeks the box goes into standby (power led flashes) without any obvious reason (ie. i cannot find anything). This happens randomly (box runs for 1 day and does this, next time it runs for 5 days and it happens). Normally when a box goes into standby,

Heya, first time posting to a mailing list so please excuse me if I do something wrong :) I'm new to NUT and trying to get things working on my TrueNAS, I have a "Vultech 1500VA" UPS which comes with the software "PowerManager II" and it seems to be using the "richcomm_usb" driver. There are 5 devices in the compatibility list and I tried all of them, sadly to no success. All of them report that the UPS is not connected to mains (or randomly switches between states) and no battery information. I also tried...

...ianxing-kebo.com/> . The UPS has a USB port on the back, but no serial port. It's currently connected via USB to my Linux box. There is Windows software supplied with the UPS which purports to provide information on input/output voltage, load, battery status, etc. The software is called PowerManager and is made by a company called RichComm (website appears to be at www.richcomm.com <http://www.richcomm.com/> ). According to their website, the PowerManager software can control various UPS brands. I've seen reference on Google to it working specifically with Starpower and UPguardS UPS...

Hi all, i've read a thread about this UPS from Peter van Valderen. He tried to develop a driver for this specific type of UPS. I've downloaded nut-2.2.2 and tried to apply the patches (lakeview.patch & lakeview.v2.patch) but both resulted in rejected chunks. I've tried to ./configure with type lakeview and then a make, but the make command fails. Does anybody has any

Hello Mailing List I got a severe network error message at a HP DL360 Server. The kernel log says: ----------------------------------- /var/log/messages ----------------------------------------------------------------- Mar 19 15:45:06 server kernel: do_IRQ: 2.168 No irq handler for vector (irq -1) Mar 19 15:45:17 server kernel: bnx2 0000:02:00.1: eth1: DEBUG: intr_sem[0] PCI_CMD[00100446] Mar 19

Hello, I would like some clarity from the developers on the state of power management for nouveau. I have recently acquired a Dell XPS 15 (2017) 9560 with: 00:02.0 VGA compatible controller [0300]: Intel Corporation Device [8086:591b] (rev 04) 01:00.0 3D controller [0302]: NVIDIA Corporation Device [10de:1c8d] (rev a1) There seems to be contradictory information online with Arch Wiki mentioning:

...es after a reboot it'll work again for a while then it starts misbehaving again. First question: Anybody have any similar issues? Anybody have any ideas on what's going on here and what I can do about it? So, not being in a position to reboot, last night I killed mate-screensaver and mate-powermanager, with the hopes the daemons would restart themselves. No such luck. so I tried to figure out what programs I could run to get them started again. So far I'm too stupid to be able to figure that out, as well. Second question: Anybody able to clue me in on how the screensavers and power managers...

Hi to all... I've just upgraded my server to Jaunty, and the newer version of NUT 2.4.1 works a treat! Thanks to all involved :) Scott Evans VK7HSE Phone: +61362291658 Mobile: +61417586157 Skype: vk7hse scott at vk7hse.hobby-site.org http://www.vk7hse.hobby-site.org PGP/GPG Key ID 74639624 -- This email and any files transmitted with it are confidential and intended solely for the use of

? for sysvol. reset the rights to there defaults and try again. samba-tool ntacl sysvolreset -UAdministrator make sure your configured as the wiki says. and sysvol is not a folder the share other things with, for that create an other share. ? Greetz, ? Louis ? Van: Rene Llanes [mailto:rllanes2004 at gmx.com] Verzonden: dinsdag 23 juni 2015 14:12 Aan: L.P.H. van Belle; samba at

...th-lists.debian.net> wrote: > Heya, > > first time posting to a mailing list so please excuse me if I do something > wrong :) > > I'm new to NUT and trying to get things working on my TrueNAS, I have a > "Vultech 1500VA" UPS which comes with the software "PowerManager II" and it > seems to be using the "richcomm_usb" driver. There are 5 devices in the > compatibility list and I tried all of them, sadly to no success. All of > them report that the UPS is not connected to mains (or randomly switches > between states) and no battery infor...

https://bugs.freedesktop.org/show_bug.cgi?id=102648 Bug ID: 102648 Summary: unable to use nvidia gpu after suspend Product: xorg Version: unspecified Hardware: x86-64 (AMD64) OS: Linux (All) Status: NEW Severity: critical Priority: medium Component: Driver/nouveau Assignee:

[PATCH 2/4] PCI: support ARI capability Support Alternative Routing-ID Interpretation (ARI), which increases the number of functions that can be supported by a PCIe endpoint. SR-IOV depends on ARI. PCI-SIG ARI specification can be found at http://www.pcisig.com/specifications/pciexpress/specifications/ECN-alt-rid-interpretation-070604.pdf Signed-off-by: Yu Zhao <yu.zhao at intel.com>

[PATCH 2/4] PCI: support ARI capability Support Alternative Routing-ID Interpretation (ARI), which increases the number of functions that can be supported by a PCIe endpoint. SR-IOV depends on ARI. PCI-SIG ARI specification can be found at http://www.pcisig.com/specifications/pciexpress/specifications/ECN-alt-rid-interpretation-070604.pdf Signed-off-by: Yu Zhao <yu.zhao at intel.com>

[PATCH 2/4] PCI: support ARI capability Support Alternative Routing-ID Interpretation (ARI), which increases the number of functions that can be supported by a PCIe endpoint. SR-IOV depends on ARI. PCI-SIG ARI specification can be found at http://www.pcisig.com/specifications/pciexpress/specifications/ECN-alt-rid-interpretation-070604.pdf Signed-off-by: Yu Zhao <yu.zhao at intel.com>