search for: powercycl

I have Sipura 841's talking to a CVS-HEAD of August 4. If I disconnect the power to the Sipura, Asterisk does not hang up the channel. My sip.conf for this phone looks like: ; [super1] ; Sipura 841 disallow = all allow = ulaw callerid = "super1"

Just an FYI, I noticed some people not being able to use the CLI of their adit 600's because of a set password. You can erase the configuration of the adit 600 by setting the RST dip switch to on, powercycling the box, waiting until it finishes coming up, setting it back to off, and powercycling again. -Joe

Recently our sysadm accidentally powercycled our server (RedHat8) after 198 days of uptime, and upon boot it insisted on checking one partition (/dev/sda7) in our RAID. When it was done, the files were in the state of August 23 last year, with anything newer either gone or invisible. I guess something went wrong with journaling data. What c...

...nd stay on, screen and buttons are dead. Connectivity to Grandstream.com was always good - whenever I checked (I downloaded the "User Manual" in a couple of minutes), the site states five minutes to load, so waiting more than 30 mins should have been OK, and they do have this "Please Powercycle" in red print too... Is there a magic re-incarnation routine ? (Power on whilst holding down some buttons?, Sprinkling chickens blood?) I chose an HTTP upgrade over TFTP - as I read that there were potential issues with TFTP at this firmware level. -- . . ___. .__ Posix Syste...

...upscsend("UPSD"); /* Set shutdown delay */ upscsend("1"); /* 1 second (lowest possible. 0 returns current.*/ upslogx(LOG_EMERG, "Shutting down..."); upscsend("UPPC"); /* Powercycle UPS */ upscsend("IJHLDMGCIU"); /* security code */ } else { upslogx(LOG_EMERG, "Shutdown called, but UPS does not support it"); } } The problem is that the if(can_upsd && can_uppc) check was added betwee...

Hi, On saturday one of our dovecot machines had an OOPS, and we had to powercycle it. When it came up, it did a filesystem fsck (ext4) and fixed a couple things, but nothing in lost+found. Now, about 50 users have a problem where their indexes are corrupted. Dovecot tries to fix them, but for some reason it is failing. The users are seeing their mails duplicated and they canno...

Anyone know of a company that makes a pass through ATA? By pass through I mean have an Ethernet switch built into the ATA, like most desktop phones have. All of the dual ethernet ATA's I have seen have WAN/LAN ports, not two LAN ports. I fooled around with DMZ etc...but it just doesn't work as well. Thermal -------------- next part -------------- An HTML attachment was scrubbed... URL:

...after a system failure. Our problem could be solved by rm /PATH/USER/mdbox/storage/dovecot.map.index* doveadm -D -v force-resync -u USER INBOX Best regards, Gordon On 05.06.2017 18:34, micah wrote: > > Hi, > > On saturday one of our dovecot machines had an OOPS, and we had to > powercycle it. When it came up, it did a filesystem fsck (ext4) and > fixed a couple things, but nothing in lost+found. > > Now, about 50 users have a problem where their indexes are > corrupted. Dovecot tries to fix them, but for some reason it is > failing. The users are seeing their mails...

Hey guys, I have a problem with my BudgeTone. It ignores calls after being online with my asterisk server for an extended period of time. I know this problem has been posted on this list before. Honestly, I searched the archives but couldn't find the previous posts. Was there ever a solution to this problem ? My firmware version is the latest: 1.0.5.11. Once again, I apologize for posting

...em generates the following error messages on the console. "ext3-fs warning : ext3_block_to_path block <0 " This messages continues to be generated and occassionally causing the system to crash. The problem is such that the system cannot be logged into even from the console. Only a powercycle of the system works. Interestingly i have another system with the same hardware and software configuration and setup which works perfectly fine. Though i am not sure it seems to be an issue with a specific file or block on the mount device. However your suggestions or advice on how to go about...

...e following error messages on the console. "ext3-fs warning : ext3_block_to_path block <0 " This messages continues to be generated, and is once in approx 2 months causing the system to crash. The problem is such that the system cannot be logged into even from the console. Only a powercycle of the system works. Interestingly i have another system with the same hardware and software configuration and setup which works perfectly fine. Though i am not sure it seems to be an issue with a specific file or block on the mount device. However your suggestions or advice on how to go abo...

...h the amber control LED flashing. Sometimes (most frequent scenario) it just boots OK and when I connect E1 plug in TE210P card it correctly clears red alarm status on the span but do not reset channels and 'pri show span 1' shows that the span is down. The only resolution is that I have to powercycle the box several times with unplugged E1 until it starts working properly. Not exactly what I would expect from a rock stable PBX. Any help is appreciated. Ondrej Here is my zaptel.conf (although I doubt there is any config error) # E1 Trunk ports span=1,1,0,ccs,hdb3,crc4 span=2,0,0,ccs,hdb3,cr...

...pingable. If I use telnet I do get a connection, but it doesn't continue to log me in. Even when connecting to port 22 (ssh) I get a connection, but the ssh server doesn't announce its version to me (as it does otherwise). Also at the console I cannot so anything with the server, apart from powercycling it. This happens about twice a day now, except for the weekends. We analyzed the output from sar. All we could find was that 'totsck' (total sockets) is rising, and reaching 900/1000 before the hang. ( approaching 1024 ??? ). We tried running samba 2.2.7a, but this didn't help. Al...

...ost that is having issues. Last night we attempted a snapshot on a VM that is critical to our infrastructure. During the snapshot, the task locked up and was unable to progress or stop the snapshot. I attempted to force the VM to stop as well as destroy it''s domain. As a last resort I had powercycled the host. Upon bringing the host online again the LUNs failed to mount properly on both of the hosts in the same cluster, entering a "Broken" state where they were listed as "unplugged" (two LUNs). This of course prevented the VMs from starting and we received a "VDI Not...

...br0 to br1 in the XML of both VM's with "virsh edit". Just be certain that each guest is either completely inactive (doesn't show up in the output of "virsh list" when you edit, or at some point after you've edited it (i.e. there must be a complete "virtual powercycle" of the guest for the changes to take effect). > Then I did start the VM's using the serial console (no network): > virsh start --console kvm66 > virsh start --console kvm68 > > I cannot ping from one machine to the other. Why?? I guess you're using <interface ty...

...DON'T see any normally mentioned error messages on the console or in the remote logs. Our main question: does anybody have similar experiences? Maybe on hp supported os? With best regards, Philipp Maechler Some more information: I/O Stall: The only solution to resolve the state is to "powercycle" the server. Any network traffic or processing stuff also like entering kernel debugger is possible, but shows only full I/O Queues... reproducing: scrubbing nonstop helps, but does result in a stall every week instead of every 4 weeks... so nothing like 'next hour'. Hardware: G7: h...

Not sure if this is the best place but does any one have any used IAXy's they are interested in selling? I am looking to pick one up cheap for a proof of concept before going all out on them. Also does any one have any real life practical experience with how well (or not so well) that these devices have worked for them? you can reply to me off list at asterisk@matraex.com Thanks Michael

...le Transparency Effects - remove/disable Cloud Sync. - Disable "Fast startup", yes, you pc might start a bit faster, but it will give you some nice problems back in the end, due to power saving/hibernation/Sleep states. A reboot is not reboot anymore, it unloading/loading windows ( not powercycle) ! Disable it to be able to reboot your pc normaly. Laptop/notebook might suffer from these problems and even worse, some have these settings enable in the bios And windows will pick up these settings. - Computer Configuration > Administrative Templates > Windows Components > Searc...

Hello, I have a bunch of Polycom 601's and Asterisk 1.4.13. The problem is that the MWI indicators will never go off (The blinking red light and envelope in the LCD). I have tried to upgrade to 1.4.14 and all different SIP versions on the Polycoms. I am now at 1.6.7 Here is the SIP Message that turns on the lights: Scheduling destruction of SIP dialog '

I'm in a situation where I'm going to have to deploy a rack of servers in an unmanned location in another country. On rare occasions, I've had systems that would not recover gracefully from a warm reboot and needed the power cycled. Years ago, I had such a device from APC, but haven't needed one in a long time since all my locations are staffed. I'd welcome any