search for: plugabl

...ly never be incorporated into mainline. Maintaining out of tree intrnisics takes a fair amount of work and leads to the choice of using a single version of LLVM for a project (and thus have to manually incorporate bug fixes) or risk untimely breakage. I propose that the plugin be extended to allow plugable intrinsics. To be sucessful, such a plugin will have to provide hooks for basic AA information, DAG supoort and legalization, and code generation for some architectures. Any of the places that currently handle intrisics would have to be modified to check loaded libraries for all registered exter...

In my work with a simple localization plugin, i''m running into a lot of places in the Rails core, where text and other localization specific information is hardcoded. I''ve included some examples in the bottom of this post. It''s hard for an outsider to know, if the hardcoded values are a result of inconsistency in code, or "by design". I hope that we can have

Hi, I have plug in this USB network device: > Bus 001 Device 002: ID 2001:1a02 D-Link Corp. > T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 > D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=2001 ProdID=1a02 Rev= 0.01 > S: Manufacturer=D-Link > S: Product=DUB-E100 > S: SerialNumber=E5ECEB > C:* #Ifs= 1 Cfg#= 1

...power cycle the port when it hangs. It does seem to be a hardware >> problem with the USB controller. > Finally an idea;-) I had the same problem for a couple of years but since I > use a [1st gen] appleTV as the server, I thought it might be it's USB port. > > I bought a `plugable USB2-HUB-AG7' and experimented a bit. So far, I did not > get it to turn the power to devices completely off:-( But the unbind/bind > seems affect the devices somehow. I tried it with a little Sparkfun RedBoard > (Arduino clone) and when I [re]bind, the RX/TX LEDs flash shortly, so...

I used to use a hot-plugable PATA-CDROM drive on my Computer (Samsung P35 laptop). To change drive I use a script which at the bottom of its heart uses Code: echo "scsi remove-single-device 1 0 0 0" | sudo tee /proc/scsi/scsi and Code: echo "scsi add-single-device 1 0 0 0" | sudo tee /proc/scsi/scsi...

...varying compression algorithm. If a file is compressed using method A but method B is now active, if I truncate the file and rewrite it, is A or B used? 2) The question of whether or not to use bzip2 was raised in the comment section of your blog. How easy would it be to implement a plugable (or more generic) interface between ZFS and the compression algorithms it uses such that I can modload a bzip2 compression LKM and tell ZFS to use that? I suspect that doing this will take extra work from the Solaris side of things too... 3) Given (1), are there any thoughts about be...

...how to convert from stand-alone to domain member.? I am not real >> familiar >> with the Active Directory side of things so perhaps I'm not asking the >> right questions or looking in the right places.? Thank you in advance. >> > > Samba id mapping strategies are plugable, one of those is the winbind > tdb id mapping. So in theory you could collect all users from one of > those servers, annotate their user, group and ids, and create a new > tdb file with the corresponding mapping from the AD domain to the > local id, and then configure winbind to us...

I've made some progress getting this Tripplite to work: http://gathman.org/2016/07/30/Standard_Schmandard/ Basically, plug it into a USB hub that actually implements USB2.0, then power cycle the port when it hangs. It does seem to be a hardware problem with the USB controller. On 05/24/2016 09:06 AM, Charles Lepple wrote: > On May 22, 2016, at 10:18 AM, Stuart Gathman wrote: >> I

I really hate to dip my toe in here, because it will only reveal my total ignorance, but…. Do the "usual rules around addrspacecast" say when different address spaces can alias? I remember somebody using address spaces to represent something like special off-to-the-side device memory, which obviously could never alias main memory, whereas other uses like the 32/64-bit thing will

We have multiple stand-alone samba (4.2.10 and 4.10.4) file sharing servers with hundreds of local users on each server (not the same on all samba servers) in a CentOS/Oracle Linux (6 and 7) network. We would like to convert these stand-alone servers to join an existing Windows based AD domain without losing data or ownership/permission metadata on these servers. Is there a guide for doing

...hangs. It does seem to be a hardware >>> problem with the USB controller. >> Finally an idea;-) I had the same problem for a couple of years but >> since I use a [1st gen] appleTV as the server, I thought it might be >> it's USB port. >> >> I bought a `plugable USB2-HUB-AG7' and experimented a bit. So far, I >> did not get it to turn the power to devices completely off:-( But the >> unbind/bind seems affect the devices somehow. I tried it with a >> little Sparkfun RedBoard (Arduino clone) and when I [re]bind, the >> RX/TX...

On 10/23/2015 05:45 PM, Yamaban wrote: > Well, looking back, during kernel 2.6 there was no systemd at all. > But! That was the time where udev and dbus came into the boot cycle. > ... > What was the rationale to get udev into boot? -- Handling the ever > changing mess of plugable, switchable hardware. Not born and bred > for servers, but for mobiles (phones, tablets, laptops). > ... > What was the rationale to let dbus near the system start at all? > -- Again mobile development. > Was it? Many servers are deployed as standard images, both physical and vi...

Yamaban wrote: >The mess we have now, is not the work of just one change. >What was the rationale to get udev into boot? -- Handling the ever >changing mess of plugable, switchable hardware. Not born and bred >for servers, but for mobiles (phones, tablets, laptops). >Who was the one that decided that "one-size-fits-all" and put that >into server environment? IMHO agreed. I believe that there is a perceived convergence of "needs" betw...

...ver but nothing really on > how to convert from stand-alone to domain member. I am not real familiar > with the Active Directory side of things so perhaps I'm not asking the > right questions or looking in the right places. Thank you in advance. > Samba id mapping strategies are plugable, one of those is the winbind tdb id mapping. So in theory you could collect all users from one of those servers, annotate their user, group and ids, and create a new tdb file with the corresponding mapping from the AD domain to the local id, and then configure winbind to use that tdb mapping....

Hello! We are having an interesting problem with the queue. What is happening is that no matter how many agents are logged into the queue, only one phone will ring at one time. So, for example, if we have two agents in the queue and two incoming calls. The first incoming call will ring on one of the agent phones, but the second agent's phone will not ring until the first agent picks up the

...ments USB2.0, then > power cycle the port when it hangs. It does seem to be a hardware > problem with the USB controller. Finally an idea;-) I had the same problem for a couple of years but since I use a [1st gen] appleTV as the server, I thought it might be it's USB port. I bought a `plugable USB2-HUB-AG7' and experimented a bit. So far, I did not get it to turn the power to devices completely off:-( But the unbind/bind seems affect the devices somehow. I tried it with a little Sparkfun RedBoard (Arduino clone) and when I [re]bind, the RX/TX LEDs flash shortly, so it seems to r...

Hi, First of all, thanks to John Gruber for the fantastic Markdown syntax and parse/render system. Also, thanks to Michel Fortin for his PHP 4 version of Markdown. Based on those two works, I have completed a **plugin-aware** PHP 5 version of Markdown. You can see it in Subversion here: * <http://solarphp.com/svn/trunk/Solar/Markdown.php> *

I am a web developer using PHP and very limited JavaScript. I keep hearing about RoR and am interested in learning it, but before I make the jump I''d like to hear about the types of applications I should be using it for. On all the tutorials you see big apps like stores, social networking, shopping carts, etc. I don''t have any immediate plans to be building something that

...be a hardware >>>> problem with the USB controller. >>> Finally an idea;-) I had the same problem for a couple of years but >>> since I use a [1st gen] appleTV as the server, I thought it might be >>> it's USB port. >>> >>> I bought a `plugable USB2-HUB-AG7' and experimented a bit. So far, I >>> did not get it to turn the power to devices completely off:-( But >>> the unbind/bind seems affect the devices somehow. I tried it with a >>> little Sparkfun RedBoard (Arduino clone) and when I [re]bind, the &gt...

Hi Andrew, I seem to be making good progress on the P5600 scheduler using the new machine model but I've got a few questions about it. How would you represent an instruction that splits into two micro-ops and is dispatched to two different reservation stations? For example, I have two reservation stations (AGQ and FPQ). An FPU load instruction is split into a load micro-op which is