search for: piis

Hi, all Did anyone tried TDM400 card on old main board (Intel 440LX chipset -- PII)? The reason I am asking is because TDM400 needs PCI2.2 and main board is PCI2.1 I do not want to upgrade yet. Thanks, Rudolf

Tested floppy boot on two machines (one PII 350, one 486DX4) Floppy boot with syslinux is very very slow, more than 18 mn to boot a linux kernel from floppy on the 2 machines. Tested with 3 different disquettes that were know to work, boot is reached after this very long time. Noise from floppy head make think floppy wait approximatly one minute between each read. No problem with pxe boot with

> Could you please try with a Debian kernel image There is one? I do not find it in either etch or sid (or on Alioth). Do I have to recompile a kernel?

Hello, I''m going to be helping a friend setup Shorewall in place of his Cisco router on his home network. Shorewall will be acting as the router/firewall gateway for internet access for his home LAN. His connection to the ISP is via PPPOE. Nothing unfamiliar here to me. It will be a standard 2 interface setup. My curiosity was peaked when he said that he is going to be installing

Hi, all I am doing "prrof of concept" system. I will have two IP phones connected to Asterisk box. Box itself will have 1 PSTN conenction and one analog phone conenction. A basic minimal configuration. At the moment I am planning to use an old PII-350 with 128M of RAM I have lying around. I can not test anything yet, as I am waiting for phones to arrive, so question is will that be

Hi! I have moved our samba configuration to a new hardware. Old config: PII 266 MHz 96MB memory RedHat 7.2 20Gb ide hard drive for samba shares samba-*-2.2.7-3.7.2 packages installed kernel-2.4.20-28.7 New config: P4 2.4GHz 512MB memory RedHat 9.0 60GB scsi hard drive for samba shares and OS 40GB ide hard drive for backups samba-*-2.2.7a-8.9.0

...chunk before sending an ack. This causes huge protocol overhead and the data rate falls through the floor. I suspect a number of the reported performance problems in this list are related to this - people tend to stick Linux and Samba on an old 486 then use this to serve an office full of brand new PIIs running WNT. Why the performance figures for the 3c509 were so much better I haven't a clue, unless the fact that it was an ISA card slowed the data rate sufficiently to minimise the windowing problem? Best regards, Paul Paul Sherwin Consulting 22 Monmouth Road, Oxford OX1 4TD, UK Phone +...

John R Pierce wrote: > On 5/31/2017 10:13 AM, m.roth at 5-cent.us wrote: >> If I had realized it would run this long, I would have used DBAN.... For >> single drives, I do, and choose DoD 5220.22-M (seven passes), which is >> *way* overkill these days... but I sign my name to a certificate that >> gets stuck on the outside of the server, meaning I, personally, am

Hi, i am seeing an oops (every couple of days) on a UP PII system with SCSI disks, Kernel 2.2.19 and ext3 0.0.6b. All oops output passed the klogd thus i cant anymore pipe it through ksymoops - I ensured klogd got the correct System.map so the result should be reliable. Apr 25 17:03:10 Unable to handle kernel paging request at virtual address 8efd1fc8 current->tss.cr3 = 0981e000, %%cr3 =

Hi. I have 2 PC's connected with 1GBit NIC's. When I transfer a file from my File-Server(Redhat9.0, 256 SD-RAM, 300MHz PII, RTL8169 NIC, 2x Western Digital WD200JB RAID 0) to my Windows-PC(AMD Athlon XP 1800+, 1024 MB DDR-RAM, WINXP PRO, RTL8169 NIC, 2x Western Digital WD080JB RAID 0) with Samba, i get Speeds around 8-9MB/sec. I think this is too low for an GBit Network, so i tested the

Package: xen-utils-common Version: 3.0.3-0-2 Severity: important I have installed all the packages I can think of to get Xen going and it still fails with the following : /var/log/xen/xend-debug.log: Exception starting xend: (111, 'Connection refused') er.py", line 463, in process_request_thread self.finish_request(request, client_address) File "SocketServer.py",

I have experienced lots of apparently dropped packets (in other words, lots of short interruptions of what the other party tries to tell me) with a GS102 and chan_capi. The GS102 is connected through a lightly-loaded switch directly connected to the * server, so bandwidth/latency shouldn't pose a problem. Funny thing is that the switch indicates 10mbit on the GS102 port - is that correct?

I'm running RedHat 7.2 (kernel 2.4.17) on a PII 300. I'm using Liveice with XMMS. I had no problem broadcasting with Shoutcast and Winamp back before I switched over to Linux. I'd love to get going on broadcasting... but Icecast refusing to open is a problem. Running icecast gives me the following. Starting thread engine... [04/Feb/2002:13:57:38] Icecast Version 1.3.10 Starting..

All, With the belief that, "given enough eyes all bugs are shallow", I submit the following to the list. I had sent a shorter version to samba-bugs last week, but, given the nature of this problem, I think everyone needs to check this on their own systems. Overview: Pulling files from an NT 4.0 machine to a RedHat 5.0 linux box using 2.0.3 or 2.0.4b smbclient *consistently* results in

Newbee here.... I would like to play around with Asterisk a little. First, I need to prepare a server with FreeBSD. It's a PII 433mHz/256mb box. Good enough? Then install Asterisk. I have a broadband (cable) internet presence. Could I do anything with this connection and Asterisk? Thanks, Rayasterisk --------------------------------- Do you Yahoo!? Read only the mail you want -

Has anyone successfully run asterisk with a VIA processor ? I have tried unsucessfully, do I have to run make with any specific switches ?

I'm thinking of placing Asterisk on an itx motherboard in a tiny case. The ITX motherboards top out around 400Mhz PII (in terms of power relative to a desktop). How much CPU would I need for an office of 50 people? How much disk storage for voicemail + OS? (typical / average) The system will have no PCI cards (no Digium FSO/FXO cards) - everything over the LAN connection. Thanks,

Hi, I am going to set up an office of 30 employees and since it's the first time I thought I will ask for suggestions (trying to make a CentOS base office :) ). I was planning to re use an old Compaq LPr PII 450, sw mirrored scsi 10000rpm disks, 448Mb RAM, to build a CentOS based firewall and I was wondering if this hardware would be enough to serve 30 clients (I already have a centos

Hello, Can anyone tell me what the "normal" number of interrupts per second is for an X100P card? I've used FreeBSD 5.3 and a linux 2.6.11 kernel on the exact same hardware (only the disk changed) and `systat -vmstat 1` on FreeBSD and `procinfo -dS -n1` under Linux. For both, I'm seeing roughly 1000 interrupts per second on my X100p card. It was a bit worse under FreeBSD, and I

On Mon, 4 Feb 2002, Jack Moffitt wrote: > > I'm running RedHat 7.2 (kernel 2.4.17) on a PII 300. I'm using Liveice > > with XMMS. I had no problem broadcasting with Shoutcast and Winamp back > > before I switched over to Linux. I'd love to get going on broadcasting... > > but Icecast refusing to open is a problem. > > Did you use the hostname parameter in