search for: photocopied

Hi all! Here is an interesting problem: I have installed Mandrake 9.0 on two server boxes, both of which are running very happily and have been for a year now (and a year or two before that on earlier versions of Mandrake). I was able to successfully add printer drivers to one of these boxes (as it was the only one running Samba at the time, called MAIN) without any problems. Yesterday, I

I have two photocopiers. Both have the facility to can to a file on a file server via smb. Both configured identically. One can write to a samba share, the other cannot (same server, same share) I'm searching for a log somewhere that might show me why the write is failing but I cannot see anything. Which log file on my fileserver would show me if the server is rejecting the connection,

Hi, DomU is a Win2008 R2 64 When i install the GPLPV drivers the network latency goes from 15ms to random numbers up to 1200ms and eventually dies. If you run a ping from the DomU to another host the network stays alive but the high latency is still there. Further more if i try and uninstall the network driver i am unable to use the old one (realtek) as it cannot detect the device.

Well, I seem to have developed a strange issue with the GPL PV drivers in Windows. I''m running Xen 3.2 on SLES 10 SP2 and running some Windows XP HVM domUs. Most (12-15) of my Windows machines work just fine. Two of them, though, have started exhibiting a strange behavior with intermittent network connectivity. Basically, the network starts up and connects initially. After some

On Tue, 2015-02-10 at 17:14 -0800, John R Pierce wrote: > On 2/10/2015 4:58 PM, Always Learning wrote: > > You have absolutely no prima facie evidence to support your assertion. > > Seriously? from page 5 of said PDF. > > Copyright ? 2011 Pearson Education, Inc. All rights reserved. > Printed in the United States of America. This publication is >

When trying to use the GPL PV drivers with Windows 7 x64 (and testsigning turned on), I get a BSOD with a STOP 0x00000101 error. There''s also an error at the top that says "A clock interrupt was not received on a secondary processor within the allocated time interval." Is this STOP error related to the HPET or other timing adjustments for Xen? Any advice on things I should

Hey, everyone, I''m running Xen 3.2 (SLES10) and trying to get an OpenSolaris PV domU to run correctly. I''ve followed a couple of the instruction sets out on the Xen wiki and other folks blogs, but I''m running into an issue with the domU crashing. The OpenSolaris version is the latest development release - 5.11-0.128. The config looks like this:

Apologies for the off-topic question; as usual I'm trying to draw upon the unparalleled knowledge and sagacity of the r-help list. Please reply off-list if you can help me out. A collaborator of mine found a formula we need, on sheets which he had photocopied out of a book, some years ago. He cannot remember which book (he's getting to be as senile and forgetful as I am, poor bloke!). He thinks it was (and it appears to have been) a large encylopedic tome devoted to extensive tables of formulae, integrals and series, and stuff like that. The form...

This may be a better question for the Xen-Devel list, but I''ll start here... Does anyone know if there is any easy way to replace the gPXE ROM with a newer version in Xen? Also, anyone know if there are any plans to have some sort of option in the domU config file to specify a boot rom? Looks like qemu-dm has an "-option-rom" option - is there any way in Xen to make use of

I've found that some embedded devices have older CIFS clients, which can only talk over SMB1. So, you can adjust your server to allow it, or look for another file transport. Kris Lou klou at themusiclink.net On Wed, Sep 9, 2020 at 3:16 PM Jeremy Allison via samba < samba at lists.samba.org> wrote: > On Wed, Sep 09, 2020 at 02:35:28PM -0700, Peter Pollock via samba wrote: >

I'm attempting to configure Samba with CUPS as a centralized print server. I've done this in the past - my current production server is running Samba 3.2.14. On my current production server, I have several users set up as either "admin users" or "print admin" users so that they can manage the drivers, etc., on the Samba server. In setting up my new server, I'm

okay, im far from a pam expert, but i don't see any mention of winbind there? It's my weekend at the moment so i can't get to my test box at work to show you my pam module using winbind, but maybe you should check out this page on my website, it's using ldap try and use this and replace any mention of ldap with winbind http://www.yourhowto.org/content/view/35/9/ or i have a

>>> On 2010/07/07 at 12:18, benco <benco@acid.sk> wrote: > No, I don''t like testsigning - this is the main reason why I want to use > Citrix driver. GPLPV driver works fine for me and if there would be a way > to use it without testsigning on, I would be happy with it. > Why don''t you like testsigning? -Nick -------- This e-mail may contain

Hi! Anyone have a suggestion which version of Linux would be the best host? We typically use Ubuntu but we are flexible since we want the best performance and the least amount of headaches getting it installed and working. Thanks, Jimmy _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hi all! I have a situtation that I want to get happening: We have just installed a colour photocopier with duplexing at a client's office. We're looking to have four printers pointing at this one device, with the following settings (one for each printer): * Black and White * Black and White, Duplexed * Colour * Colour Duplexed My question is, can we have server-side settings for

So, I made a mistake a bought four systems with the Intel Core i3 processors, without doing my homework to make sure that these systems actually supported VTd. Turns out there''s plenty of information out there indicating that the Core i3 processors do *not* support VTd. I was counting on VTd for two applications: Graphics Passthrough and passing through a PCIe 4-port serial card. Of

Folks, Sincere apologies for asking this again, but I'm just not getting this to work, and must be missing something here: My company's network is based around a Windows 2003 server AD, with several RHEL AS 3 boxes connected to it via samba (3.0.21c-1). ?This scheme works very well. ?I've set up, and have successfully been using a sendmail-based email system, too. My issue is

I''m using Xen with SLES10 and am using NPIV to attach FC SAN disks to my domUs. I''ve resize one of the disks on my SAN and I''m wondering if there''s a way to force Xen to rescan/resize the block device without shutting down the domU or unmounting the volume. Thanks, Nick -------- This e-mail may contain confidential and privileged material for the sole use

I'm trying to backup certain pieces of my XP workstations home directory to a mapped drive using rsync on Cygwin. I was able to create a fairly useful exclude-from list, but I'm unable to re-include portions a subset of an excluded directory. My rsync command looks like this: rsync -avn --delete --stats ~/ \ /cygdrive/i/HRMS/rdavies/backup/home \

I''m trying to contain my frustration...but I''m wondering if *anyone* has *ever* gotten the Import functionality to work in XCP? I''ve tried several times, and keep getting the same obnoxious and useless error that is absolutely no help to anyone: Failed to Import. I have made sure that the transfer VM is installed (View -> Show Hidden Objects, transfer VM is there),