search for: pe2950s

I've got a new PE2950 rack system with PERC controller and 6 drives set up contiguously as one RAID5 volume on the PERC controller. Using 64-bit CentOS 4.4, I partitioned for /boot having 100 Meg, swap having 2 gig, and / with the rest (removed LVM). After the install was complete, the system rebooted and just gave me a broken grub prompt (not the graphical Grub boot selector, but

I have a Dell PowerEdge 2950 with PERC 5/i, and 6 disks. Two disks have one logical volume via a hardware RAID 1 and consist of CentOS 5 64-bit; the remaining four comprise a logical volume via a hardware RAID 0, and is all user data. One drive on the RAID 0 went bad. I removed it while the system was on, tried a reboot, and the system hangs at RedHat Linux... Starting I tried to boot

I am testing Asterisk 1.4.22, zaptel 1.4.10.1 and libpri 1.4.4 on RHEL5 on DELL PE2950 and using ISDN-10. I thought about cutting over to production tonight when I noticed a serious problem. SIP calls are fine but if I dialed to outside (Dial(Zap/g1)) a few times or someone called in a few times, Asterisk just froze (cannot enter anything on the CLI console) and then even the machine had to be

Hi list, I'm now considering to buy a new server for an Asterisk installation, since I've been kindly advised<http://lists.digium.com/pipermail/asterisk-users/2007-October/198146.html>not to use an old server for a mission critical app... Well, playing around in Dell's, HP's and IBM's online stores, I've noticed a lot of Discounts or even FREE upgrades from Dual to

when I run dmesg PE2950 Dell Server I see the following line Linux version 2.6.18-92.1.6.el5 (mockbuild at builder15.centos.org) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-42)) #1 SMP Wed J un 25 13:45:47 EDT 2008 Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 0000000000100000 -

Hello, Is it possible to alter how XCP enumerates multi-core cpu’s such that a Vcpu represents a “socket”, rather than a “core”? A server with dual quad core processors, no HT, presents each of the 8 cores as a Vcpu to the guest. Windows Server 2008 R2 see’s each Vcpu as a unique “socket” and we are therefore coming up against licensing issues with Windows and more importantly SQL Server 2008

Hi, I'm currently (re-)planning my email setup and have been doing some research. I have done some searches and read several threads in the areas of my questions here. While there are some that come close I haven't yet been able to get all my questions answered. I currently run a postfix, dovecot & roundcube setup and have about 2000 active accounts. I have a separate SMTP server

I've purchased an LG DVD Burner (GSA-E60L) External super Multi DVD Rewiter for my PE2950 Dell Server attached via USB. Can someone guide me to set up the DVD with Linux, and which tools should I use to burn DVD? [root at PowerEdge1 /]# cdrecord -scanbus Cdrecord-Clone 2.01 (cpu-pc-linux-gnu) Copyright (C) 1995-2004 J?rg Schilling Note: This version is an unofficial (modified) version with

I have CentOS 5 installed on a few Dell PE2950 systems. ? ?The SMART daemon claims the drives included with the server do not support SMART, which rather surprised me. What, then, are my options for monitoring the health of the server hard drives? ?It would be nice to have some service running I could email to myself on the status of each drive. Thanks. Scott

Greetings all- I have a CentOS 5 (Final) system that is serving up content to several other hosts via NFS. The amount of data transferred is rather small as most of the files are under 100kb and each export has maybe 100 files that are accessed regularly. I'm finding that as I add more hosts accessing the NFS server, the performance seems to be getting poorer. There are obvious delays when

...g drivers and Megaraid Storage Manager downloads via LSI's site, but I'd prefer not to install a bunch of crapware. All I need is the proper LSI daemon which exports info via SNMP. I've used check_sasraid_megaraid Nagios script [0] in the past for PERC5i and PERC6i controllers in Dell PE2950s. For 2950s I've only had to install sas_snmp-3.11-0003.i386.rpm from LSI to get rolling. I've tried installing parts from the MSM zip/tarball mess to install only the lsi_mrdsnmpd daemon (lsi_mrdsnmpagent). PERC5i = LSI 8048e (megaraid) PERC6i = LSI SAS 1078 (megaraid) SAS6/iR = LSI SAS...

last night I checked the log messages on the server Dell PE2950 6xSAS 146G I found the smartd running , I did not request such daemon [root at PowerEdge1 pons]# tail -f /var/log/messages Aug 25 08:27:30 PowerEdge1 smartd[8039]: Home page is http://smartmontools.sourceforge.net/ Aug 25 08:27:30 PowerEdge1 smartd[8039]: Opened configuration file /etc/smartd.conf Aug 25 08:27:30 PowerEdge1

hi, I have to configure Xen server and DomU''s which should be able to talk to different vlans - depending on services put on DomU''s. I would like to enslave 2 NICs via bond interface. Both NICs are on trunk ports which are configured in the same way, the same native vlan. I don''t know, if I have to add vlans tagging to eth* interfaces then enslave tagged eth*

Hi, I know it''s a problem that has already been discussed, but as I didn''t see any solution, I''m asking... We''ve been trying to use Xen 3.0.3 HVM mode with windows or linux in the past few weeks, and have been suffering from bad network performance. First, I must say that we didn''t succed to setup Windows 2000/2003 directly using  Xen, we had to

CentOS 4.6 x86_64, Dell PE2950 with DRAC5, onboard SAS RAID 1, 2 arrays. After booting installed system, /dev/sda exists but does not appear to be a hard disk. fdisk -l displays nothing for sda. CentOS is on /dev/sdb and the second RAID 1 array is now /dev/sdc. It's been suggested (in the Dell Linux mailing list) that it is related to the virtual CD device of the DRAC. But why would it

Hi All, I install CentOS 4.4 without additional driver disk. When I partition the disk, I create nothing on the raid 5, and I just create " / " " /boot " and "swap" on the raid 1. And it works. When I create a mount point /storage on the raid 5 and create " / " " /boot " and "swap" on the raid 1. The error comes again, saying that

hi, all: I'v got a Gluster testing, and found some performance issuse pertain to Gluster I built a ten-node Gluster enviroment, (3 X HP 380G5, 4 IBM 3650, 2 X HP C7000. 1 X DELL PE2950, all the network switch & NICs are all gigabit). And set up three volumes: a ten-brick distribute volume (ten-brick means this volumes resides on ten nodes, others are same), a five-brick distribute

Dear All, I''m totally new to DRBD + XEN over iSCSI but I need to configure this scenario in order to buy the right hardware. Our department will provide us with an iSCSI target which will be replicated in its own to a secondary iSCSI SAN (probably they will use DRBD). This target will be used, in our ideas, to replicate our own iSCSI san, that we are going to buy. We will probably

Hi, I did a standard i386 install of 5.2 on a test machine. Then I ran the following command yum install \* and got the following error. Error: Missing Dependency: pilot-link-devel >= 0.11.8 is needed by package gnome-pilot-devel Checking my local repo and my usual upstream mirrors for pilot-link-devel it's not there. [root at thomond CentOS]# locate pilot-link-devel | grep

Sorry for the repost... I don't think the first one posted.. posted to freebsd.stable, freebsd-current, Freebsd-hardware I checked the hardware in the online documentation manual/hardware It only lists the bits and peices of the machine say the hard drive controller and so forth. but doesn't give you a particular system to look at as a working machine with FreeBSD 6.2 does anybody