search for: pci1

...0. Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 Correcting Natoma config for non-SMP pcib1: <IBM 82351 PCI-PCI bridge> at device 13.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <Cirrus Logic GD5430 SVGA controller> at 6.0 tl0: <Compaq Netelligent 10/100 Proliant> port 0x6480-0x648f mem 0x40001500-0x4000150f irq 5 at device 7.0 on pci1 tl0: Ethernet address: 00:08:c7:78:08:57 miibus0: <MII bus> on tl0 nsphy0: <DP83840 10...

We have upgraded a box from 6.2 to 6.3-RELEASE. Afterwards the box does not recognize its ST Lab I-160 serial card with Netmos 9845 Chipset. It worked flawlessly on 6.2 with puc(4) driver. >From dmesg: pci1: <simple comms, UART> at device 8.0 (no driver attached) ~# pciconf -l -v | grep -B 4 UART none2@pci1:8:0: class=0x070002 card=0x00041000 chip=0x98459710 rev=0x01 hdr=0x00 vendor = 'MosChip Semiconductors (Was: Netmos Technology)' device = 'Nm9845 Parallel/Serial...

I'm experiencing similar problems with a 3C996-T under 4.8-REL. In particular, connecting a 4.8-REL machine to a 5.1-REL machine leads to some interesting situations: I can do simple pings across the link, but ssh fails, and heavy pings crash the 4.8 machine. Similarly changing the interface configuration with ifconfig tends to crash the 4.8 machine (mtu, link0, up/down, etc). The

...preciated. System running 4.8-STABLE with X11 & NVidia built within last week. (4.8-STABLE #2: Mon Apr 14 07:42:46 HST 2003) Kernel probe info w/o NVIDIA (modem works): at boot prompt enter: > unload all > load kernel > load snd_emu10k > boot Apr 14 09:30:27 chapel-hill /kernel: pci1: <PCI bus> on pcib1 Apr 14 09:30:27 chapel-hill /kernel: pci1: <NVidia Riva TNT2 graphics accelerator> at 0.0 irq 11 Apr 14 09:30:27 chapel-hill /kernel: sio0: <3COM PCI FaxModem> port 0x1428-0x142f irq 11 at device 14.0 on pci0 Apr 14 09:30:27 chapel-hill /kernel: sio0: moving...

...on cpu1 device_attach: powernow1 attach returned 6 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0x8080-0x80ff,0x8000-0x807f,0xcf8-0xcff iomem 0xd8000-0xdbfff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci1: <ACPI PCI bus> on pcib1 ohci0: <OHCI (generic) USB controller> mem 0xfc100000-0xfc100fff irq 19 at device 0.0 on pci1 usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, a...

...sh 4.8-STABLE system. I have installed the NVIDIA drivers from the ports, everything went well but when the 'nvidia.ko' kernel module is loaded I got this message: nvidia0: <GeForce4 MX 440> mem 0xdda80000-0xddafffff,0xd0000000-0xd7ffffff,0xde0 00000-0xdeffffff irq 0 at device 0.0 on pci1 pci_cfgintr: can't route an interrupt to 1:0 INTA nvidia0: Interrupt handler setup failed. device_probe_and_attach: nvidia0 attach returned 22 I have tested my card under 4.7-STABLE, 4.8-STABLE and CURRENT and it is always the same message, what is wrong ? :/ Thanks.

...lt;PCI bus> on pcib0 agp0: <Intel 82845G (845G GMCH) SVGA controller> mem 0xd8d00000-0xd8d7ffff,0xd0000000-0xd7ffffff irq 12 at device 2.0 on pci0 agp0: detected 892k stolen memory agp0: aperture size is 128M pcib1: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0 pci1: <PCI bus> on pcib1 fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0xc000-0xc01f mem 0xd8800000-0xd88fffff,0xd8c00000-0xd8c00fff irq 12 at device 0.0 on pci1 fxp0: Ethernet address 00:a0:c9:e7:a6:e6 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10base...

...sk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard pci0: <PCI bus> on pcib0 pci0: <Cirrus Logic GD5446 SVGA controller> at 11.0 pcib1: <DEC 21150 PCI-PCI bridge> at device 13.0 on pci0 pci1: <PCI bus> on pcib1 tl0: <Compaq Netelligent 10/100 Proliant> port 0x2c00-0x2c0f mem 0xc6efcdf0-0xc6 efcdff irq 5 at device 7.0 on pci1 tl0: Ethernet address: 00:08:c7:9f:78:1e miibus0: <MII bus> on tl0 nsphy0: <DP83840 10/100 media interface> on miibus0 nsphy0: 10baseT, 10...

...6 interface pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 drm0: <Matrox G400/G450 (AGP)> mem 0xe5000000-0xe57fffff,0xe4000000-0xe4003fff,0xe8000000-0xe9ffffff irq 11 at device 0.0 on pci1 error: [drm:mga_init] *ERROR* Cannot initialize the agpgart module. device_probe_and_attach: drm0 attach returned 12 System is running a...

I would also like to help as well. As KMacy knows before i asked a lot of questions for T2 types of servers but unfortunately i have no more access to those kind of hardware as well. I;m willing to participate if a team will be formated.

...support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard IOAPIC #1 intpin 4 -> irq 18 pci1: <PCI bus> on pcib1 pcib2: <PCI to PCI bridge (vendor=8086 device=0964)> at device 5.0 on pci1 pci2: <PCI bus> on pcib2 mly0: <Mylex AcceleRAID 352> mem 0xedffe000-0xedffffff irq 18 at device 5.1 on pci1 mly0: AcceleRAID 352 , 2 channels, firmware 6.00-1-00 (20000426), 64MB...

Hi, I have strange problem when booting FreeBSD-6.x in HP Proliant ML370 G4. The problem is "-" appears on the screen and it never boots unless somebody hits the "Enter" key. Sometimes even PS2 keyboard doesn't respond during that time. Tried with USB keyboard, same problem. The machine has dual Xeon 3.2 GHz, 1GB of RAM and LSI Logic (mpt-5.0.5.20.00 bios) LSI1030-IT

...: [FILTER] sio4 on puc1 sio4: type 16550A (multiport) sio4: [FILTER] sio5 on puc1 sio5: type 16550A (multiport) sio5: [FILTER] sio6 on puc1 sio6: type 16550A (multiport) sio6: [FILTER] sio7 on puc1 sio7: type 16550A (multiport) sio7: [FILTER] pcib6: <ACPI PCI-PCI bridge> at device 0.2 on pci5 pci10: <ACPI PCI bus> on pcib6 uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x2000-0x201f irq 16 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, cl...

Hi, Just got some of the new Soekris 1401 VPN cards based on the hifn 7955 chip. hifn0 mem 0xe8510000-0xe8517fff,0xe8518000-0xe8519fff,0xe851a000-0xe851afff irq 5 at device 0.0 on pci1 hifn0: Hifn 7955, rev 0, 32KB dram, 64 sessions vs hifn0 mem 0xeb902000-0xeb902fff,0xeb901000-0xeb901fff irq 10 at device 8.0 on pci0 hifn0: Hifn 7951, rev 0, 128KB sram, 193 sessions When it says "n sessions" how does that specifically impact IPSEC ? Does it really mean I can only...

i trust i am still new in freebsd, after go through all mail and book, = now seem to be more close, i got 3 server and a notebook to play with, = install no problem. cvsup not problem.make buildworld not problem. make = build kernel become,every machine i got different error code 1,=20 1-one got system full=20 2-one showing this sometime=20 > anyone know the best way to be one time success,not

...156800 (1310700K bytes) avail memory = 1300033536 (1269564K bytes) Preloaded elf kernel "kernel" at 0xc04be000. Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib1: <ServerWorks host to PCI bridge> on motherboard pci1: <PCI bus> on pcib1 ciss0: <Compaq Smart Array 5i> port 0x3000-0x30ff mem 0xf7ef0000-0xf7ef3fff,0xf7fc0000-0xf7ffffff irq 11 at device 4.0 on pci1 ciss0: using 256 of 1024 available commands ciss0: 1 logical drive configured ciss0: firmware 1.80 ciss0: 2 SCSI channels ciss0: sig...

...port enabled md0: Malloc disk Using $PIR table, 9 entries at 0xc00f8010 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <PCI to PCI bridge (vendor=1106 device=b099)> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <NVidia model 0110 graphics accelerator> at 0.0 irq 11 rl0: <RealTek 8139 10/100BaseTX> port 0xec00-0xecff mem 0xdfffff00-0xdfffffff irq 11 at device 12.0 on pci0 rl0: Ethernet address: 00:50:fc:96:57:d3 miibus0: <MII bus> on rl0 rlphy0: <RealTek...

...out 10%-25% performance drop when copying files over network. Tested with both SAMBA and NFS. Is it normal? FreeBSD 7.1-PRERELEASE #0: Sat Sep 6 01:52:12 CEST 2008 fxp0: <Intel 82801DB (ICH4) Pro/100 Ethernet> port 0xc800-0xc83f mem 0xe1021000-0xe1021fff irq 20 at device 8.0 on pci1 # ifconfig fxp0 fxp0: flags=9843<UP,BROADCAST,RUNNING,SIMPLEX,LINK0,MULTICAST> metric 0 mtu 1500 options=8<VLAN_MTU> ether 00:20:ed:42:87:13 inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255 media: Ethernet autoselec...

...tium Pro MTRR support enabled Using $PIR table, 6 entries at 0xc00fde70 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <PCI to PCI bridge (vendor=1106 device=b112)> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <Trident model 8500 VGA-compatible display device> at 0.0 irq 11 isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686 ATA100 controller> port 0xe000-0xe00f at device 7.1 on pci0 atapci0: Correc...

...on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pcib1: <ACPI Host-PCI bridge> on acpi0 pci1: <ACPI PCI bus> on pcib1 atapci1: <CMD 649 UDMA100 controller> port 0x4af0-0x4af7,0x4aec-0x4aef,0x4af8-0x4aff,0x4b00-0x4b03,0x4b10-0x4b1f irq 19 at device 2.0 on pci1 ata2: <ATA channel 0> on atapci1 ata3: <ATA channel 1> on atapci1 atapci2: <Promise PDC20268 UDMA100 cont...