search for: pci00

...--8<-- ISOLINUX 1.75 2002-06-14 isolinux: loading spec packet failed, trying to wing it... isolinux: extremly broken bios detected, last ditch attempt with drive=9F isolinux: disk error 80, ax=432E, drive 9F --8<-- My configuration is: VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:07.1 CMD649: IDE controller on PCI bus 00 dev 48 hda: TOSHIBA DVD-ROM SD-M1502, ATAPI CD/DVD-ROM drive hdc: SAMSUNG CD-R/RW SW-216B Q001 20010913, ATAPI CD/DVD-ROM drive hde: ST380021A, ATA DISK drive CMD649 is an external IDE controller, that has hard drive connected to it (it says something abou...

Hi! The linux.c32 module doesn't boot my kernel, while pxelinux itself does: kernel vmlinuz-2.6.23 append initrd=initrd.img-2.6.23 root=/dev/mapper/root works, while kernel linux.c32 append vmlinuz-2.6.23 initrd=initrd.img-2.6.23 root=/dev/mapper/root does not: it stays sitting after loading the initrd without any output. Version 3.50-pre2 worked, current git does not work.

...@oldroadcomputing.net) (gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3) debug=y Mon Jul 8 15:09:16 EDT 2013 (XEN) Latest ChangeSet: Mon Jul 8 15:08:40 2013 -0400 git:6a62f63 (XEN) Console output is synchronous. (XEN) Bootloader: COM32 Multiboot loader v0.2 (XEN) Command line: dom0_mem=max:2048M dbgp=ehci@pci00:1d.0 console=dbgp loglvl=all sync_console (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 00000000000...

...ttempted to be downloaded. Right after loading it, the client says it can't read that file. The boot screen looks like this: iPXE 1.0.0+git-20141004.86285d1-1 -- Open Source Network Boot Firmware -- http://ipxe.org Features: HTTP DNS TFTP EFI Menu net0: 52:54:00:12:34:56 using 82540em on PCI00:03.1 (open) [Link:up, TX:0 TXE:0 RX:0 RXE:0] Configuring (net0 52:54:00:12:34:56)...... ok net0: 192.168.88.51/255.255.255.192 gw 192.168.88.4 Next server: 192.168.88.4 Filename: EFI64/syslinux.efi tftp://192.168.88.4/EFI64/syslinux.efi... ok Failed to read blocks: 0xC It does not even _t...

...or PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 39 VP_IDE: chipset revision 6 VP_IDE: not 100%% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1 ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:pio, hdd:pio hda: Maxtor 6E030L0, ATA DISK drive At panic-time in /var/log/messages Unable to handle kernel NULL pointer dereference at virtual address 00000015 printing...

...E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 89 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci00:11.1 ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio hda: WDC WD400BB-32CXA0, ATA DISK drive hdc: LITE-ON LTR-24102B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x37...

Hi, Apologies, this is going to be quite long - I'm going to provide as much info as possible. I'm running a system with ext3 fs on software RAID. The RAID set-up is as shown below: jlm@nijinsky:~$ cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid5] read_ahead 1024 sectors md0 : active raid1 hdc1[1] hda1[0] 96256 blocks [2/2] [UU] md5 : active raid1 hdk1[1] hde1[0]