search for: pc100

...t] Sent: Thursday, August 12, 2004 10:46 AM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] How Many Calls On This Config I've seen a couple posts about SMP, and I'm wondering if anyone has an idea what I can handle with this box: Dual P2 Xeon 450 MHZ with 2MB L2 Cache 1 GB PC100 SDRAM RAID 5 Running SuSE 9.1 2.6 SMP Kernel... Currently I have 16 users, 10 CISCO 7912G Using ULAW 3 Sipura 1000's Using GSM or g726 2 Motorola MTA VT1005's Using ULAW 1 Iaxy Using ULAW and g726 So far I've had 7 concurrent calls with mixed codecs and no issues on call quality....

...> several hundred iterations. > > Scratch this. It eventually failed. So it would appear that the > optimizations are not at fault, at least in my case. Though, as I said, my > hardware has become rather flaky of late. Upon disassembling my machine, I discovered that I had some PC100 RAM clocked at 133MHz, and this was likely the source of my problem. I'll re-run the test files and see what happens now. -- - mdz

...unt-point unmount /mnt/mount-point ============================================================= Can someone here tell me why, by just changing distributions, I've increased my backup time by about 50%? Both setups use Samba 2.2.5 The system's specs are: Celeron 800 (100MHz FSB) 320MB of PC100 SDRAM NetGear FA311TX 10/100 NIC running at 100Mb/s Maxtor ATA-133 PCI Controller 1-7.5GB ATA-66 IDE HD for the OS 2-40GB ATA-100 IDE HD in Software RAID0 for "/backup" mount point Each Drive is "Master" on own IDE Interface of Maxtor Controller No additional drives on either...

...x240 stream, it represent about 150 Kbyte of each buffer, so I will need about 500 Kbytes of memory. It is too much to use FPGA internal memory. So I'm planning use a external SRAM of 500Kbytes. SRAM data sheet: http://www.olimex.com/dev/pdf/71V416_DS_74666.pdf Another alternative is to use a PC100 SDRAM of 16 Mb: http://download.micron.com/pdf/datasheets/dram/sdram/128MbSDRAMx32.pdf http://www.altera.com/literature/ds/ds_sdram_ctrl.pdf My Altera Stratix Dev. Kit has this SRAM and SDRAM. See: http://www.altera.com/literature/manual/mnl_nios2_board_stratixII_2s60.pdf Please, comments and...

...ying bug fixed. System Configuration: - Ubuntu 10.04.4 LTS 32-bit * Linux 2.6.32-46-generic - FIC VA-503+ mainboard * BIOS Version JE439 (I believe this is the last release version.) * VIA Technologies Apollo MVP3 chipset - AMD K6-2 (I know it's old.) * 450 MHz * 100 MHz FSB - 512 MB PC100 DDR SDRAM * 256 MB PC100 SDRAM DIMM X 2 * Passes Memtest86+ v4.00 test in flying colors - BFG Technologies GeForce 7300 GT graphics card * 512 MB DDR2 SDRAM * Universal (1.5V/3.3V) AGP - Intel 100 Mbps Ethernet PCI card - Creative Labs/Ensoniq ES1371 PCI sound card - Maxtor 90720D5 7 GB PAT...

On Sat, Aug 17, 2002 at 08:03:53AM -0700, Josh Coalson wrote: > --- Matt Zimmerman <mdz@debian.org> wrote: > > > > I am able to reproduce this on my system. I am of course using the > > same > > Debian packaged binary, and the test files from the bug tracker. It > > does > > not happen every time. Sometimes I can get the failure in a few > >

Hi. I have 2 PC's connected with 1GBit NIC's. When I transfer a file from my File-Server(Redhat9.0, 256 SD-RAM, 300MHz PII, RTL8169 NIC, 2x Western Digital WD200JB RAID 0) to my Windows-PC(AMD Athlon XP 1800+, 1024 MB DDR-RAM, WINXP PRO, RTL8169 NIC, 2x Western Digital WD080JB RAID 0) with Samba, i get Speeds around 8-9MB/sec. I think this is too low for an GBit Network, so i tested the

Hi all, I''ve just built Mandrake 10.1 on a Compaq Deskpro that I''ve built as a router/firewall and am redirecting port 80 outbound to force users through the Content Filter. I''ve run this setup on Mandrake 9.0 and 10.0 without any problems but this time the following happens. Squid is accessed through port 3128 and Dansguardian via 8080. If I set my browser on a

...2-bit * All patches issued in the last 2 weeks have been applied * Linux 2.6.32-43-generic - FIC VA-503+ mainboard * BIOS Version JE439 (I believe this is the last release version.) * VIA Technologies Apollo MVP3 chipset - AMD K6-2 (I know it's old.) * 450 MHz * 100 MHz FSB - 512 MB PC100 DDR SDRAM * 256 MB PC100 SDRAM DIMM X 2 * Passes Memtest86+ v4.00 test in flying colors - NVIDIA RIVA TNT2 M64 graphics card * 32 MB SDRAM * Universal (1.5V/3.3V) AGP - Intel 1000 Mbps Ethernet PCI card - Maxtor 91360D8 13.6 GB PATA hard drive - AT keyboard - PS/2 mouse Regards, fpgahardw...

Hello everyone: Over the past few years I have been a happy samba user, running samba on Redhat / FC platforms. Recently I upgraded hardware, and Samba hasn't been performing well at all.. which makes me sad :-( The new hardware is Asus P5B board with a dual-core intel processor. This board has an onboard Realtek RTL8111/8168B gigabit ethernet controller, which was a hassle to setup.

Not all FTP sites have the first release candidate, but it is at least available from ftp.freebsd.org. Please download and install this candidate and help us find bugs BEFORE we call it 4.9-RELEASE. ftp.FreeBSD.org/pub/FreeBSD/releases/i386/4.9-RC1 ftp.FreeBSD.org/pub/FreeBSD/releases/i386/ISO-IMAGES/4.9-RC1-i386-disc1.iso We are particularly interested in having people test this release

...CC/DDR256/PC266 290 KVR266*72C25/512 ECC/DDR512/PC266 620 KVR266*72RC25/256 ECC-RGS/DDR256/PC266 320 KVR266*72RC25/512 ECC-RGS/DDR512/PC266 610 KVR133*64SC3/128 ±Ê¼Ç±¾SD128M/144PIN/PC133 100 KVR133*64SC3/256 ±Ê¼Ç±¾SD256M/144PIN/PC133 290 KVR100*64SC2/128 ±Ê¼Ç±¾SD128M/144PIN/PC100 90 KVR800*16-8/128 RB128MB/800MHZ/Non-ECC/8-Device 130 KVR800*16-16/256 RB256MB/800MHZ/Non-ECC/16-Device 300 KVR800*16-16/512 RB512MB/800MHZ/Non-ECC/16-Device 590 KCS-D2600/32 32MB/DRAM/ÊÊÓÃÓÚ2600ϵÁÐ 80 KCS-D2600/16 16MB/DRAM/ÊÊÓÃÓÚ2600ϵÁÐ 70 Kinghorse 64M 8ns/168PIN SDRAM/PC1...

Hi all, Just watching for my first time the 'oom-killer' call in a CentOS 4.2 workstation. System was running normally but with high load of nice process, iow, rosetta and seti, others appart, nautilus, etc... i realized that after a night of standby running normally, the next moorning after few manual operations from X-session in local console, it started a massive swapping, this time