search for: pbx4linux

I've got an old HFC-S card to play with, and I would like to use it in NT mode. I've a problem only: wiring. I can't fully understand the instructions I was able to find online. Someone can point me to a site which explains the whole procedure clearly (like with some schematics, even in ASCII)? TIA, Simone.

Hello, We have a quadBRI in NT mode with bri_cpe_ptmp signalling and when connect a ISDN telephone to this nothings happen. What can I do? My config files are this: Zaptel.conf: loadzone=es defaultzone=es # qozap span definitions # most of the values should be bogus because we are not really zaptel span=1,1,3,ccs,ami span=2,1,3,ccs,ami span=3,1,3,ccs,ami span=4,1,3,ccs,ami bchan=1,2 dchan=3

Hi, I am looking for inexpensive isdn card that supports nt mode with asterisk. Does it mean that if mISDN has nt mode support for a specific card that asterisk has too? If yes, I presume I could buy any of the cards listed on the PBX4Linux page: http://isdn.jolly.de/cards.html Or will asterisk work ONLY with cards with hfc chipsets? Cheers, Arik

...annels Chan List: (nil) routeur*CLI> misdn show config Config: 0x810d678 * Port 1 Context Intern --> msn * /etc/asterisk.misdn.conf ... [intern] ports=1 context=Intern msns=* .... The S0 in the pbx is configured with the protocole : netwotk Euro-RNIS PMP I have also try my driver with pbx4linux, the result : routeur:~# pbx query ** PBX4Linux ** Version 2.5 (August 2004) Port 1: NT-mode BRI S/T interface port (for phones) -------- when I try a call I have the following messages (with debug =4 ) routeur*CLI> dial 100@tel -- Executing Dial("OSS/dsp", "misdn/1/100...

...[and 2x X100P Analogue FXOs, but that's not relevant here] My understanding is that I should configure the ISDN card in NT mode and power the bus with an NT1, or will a crossover cable in to the HiCom suffice? Reference to NT1's and line power here: http://isdn.jolly.de/download/v3.0/PBX4Linux-3.0.pdf - Siemens HiCom 150e: I currently have a HiCom 150e switch with digital and analogue stations and an analogue trunk card (TLA4). I also have an STLS4 card. Initially, I thought this would be the answer to my prayers but now am not so sure... According to http://www.webco.com/siemens/i...

Hi all, Does anybody of you have the winbond w6692 working with the mISDN/chan_misdn.so? When loading chan_misdn.so from Asterisk, I get a "No lower Id port:1" error. The /var/log/messages file says: "MISDN free_device: entitylist not empty" I'm using Linux 2.6.11.11 + mISDN-CVS-2005-05-01 + Asterisk 1.0.7 + Zaptel 1.0.7 chan_misdn build from chan_misdn-beta-0.0.3-rc6

Hi, I'd like to realize the following setup traditional phones --> pbx (non ip ) --> asterisk --- ISDN network is it possible to set up an asterisk server in such way that it acts as gateway between a traditionnal pbx and an isdn network ( I'm in France ). this to let people continue with their existing pbx + phones and enjoy voip features ? outgoing calls: if yes,do I need

Hi all, I have just been reading an article on the asterisk-doc site about ISDN X-Over cables. The article mentioned the converting of an NT1 to make this possible, has anybody got the information required to modify a BT NT1? Or any information on the BT NT1. Thanks in advance. Regards Dave

Running slackware 9.1 with compiled kernel from source 2.6.5 running ok. I have 2 HFC-S chipbased Billion Bipac PCI ISDN BRI cards installed in PC. Would like to use one card as in TE and one in NT mode. System works fine running pbx4linux.But want to use SIP functionality, so I would like to try out the Asterisk. Trying to install the bri-stuff.0.0.2.tar.gz (May 10 2004)package, getting the following compile errors below. Running through the script results in "bailing out..." Any hint/directions/where to look is highl...

Hi all ! We have 3 NTBAs which are all going to our existing PBX. Our areacode is 06003 and our DDI enabled number 9141. I want to exchange that PBX with Asterisk, but still struggle to get it working. My CAPI.CONF is currently like this: [general] nationalprefix=0 internationalprefix=00 rxgain=0.800000 txgain=0.800000 [interfaces] context=in-capi msn=60039141 incomingmsn=* controller=1

...orite configuration would consist of an ISDN2 telco connection on the outside and running multiple ISDN phones from a single point-to-multipoint nt-mode ISDN controller (CologneChip based) on the inside, this does not seem to be supported very well at this stage. ISDN bus power, as described by the PBX4Linux initiative, is not much of an issue for me personally, because all our ISDN equipment have their own power supply. Hopefully support for internal ISDN S-busses will become available in time, as we, like many others in Europe, have made significant investments in ISDN equipment over the years and li...

-----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Zoltan Szecsei Sent: zaterdag 16 juli 2005 12:54 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Multiple ISDN BRI Units with Asterisk usingBristuff zaphfc in NT mode? >> Maybe this is rather a hardware question,

hi all, i have a probably very stupid question/problem. for testing purpose i am trying to get asterisk running with two isdn cards. I'd only like to here the demo sound when i call the number - but nothing works. The output of show channels is not showing any channel - should there be 4 channels ? - capi info shows my two cards perfectly. The ISDN Controller's are attached to an PTMP