search for: p4p800

Hello all, I tried sending this message to freebsd-config and freebsd-install, after subscribing to them, but no one answered back... so I am posting my question here. I just downloaded ISO images for 4.8-RELEASE, and prepared them for installation on an brand new ASUS P4P800-based computer. More information about this motherboard and integrated peripherals list, can be found here: http://www.asus.com/products/mb/socket478/p4p800/overview.htm I am having a problem booting up the CD-ROM on this computer. After the kernel boots up, and then skipping the hardware configu...

Has anyone had any success getting this chipset's ATA RAID controller to appear under CentOS 4.1? If so, can they break it down for me in easy to understand steps? -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20050831/a26e6dd2/attachment-0001.html>

...a P4, and have lotsa RAM, I don't need audio, I do want to do RAID, but I'll do software RAID if hw isn't available for IDE. the RH hardware list seems rather woefully out of date, does anyone have any recommendations for a good motherboard guaranteed to work? I'm looking at ASUS P4P800-E-deluxe which has a driver on the ASUS site for the ethernet card that appears to compile on CentOS, it's a 3Com Gigabit LOM (3C940).. anyone have any reports on this? Zebee

Hi again, Anyone has an idea how to debug this problem? I tried nearly everything possible, including disabling devices in the BIOS and in CLI mode. I even replaced the CD-ROM drive with another one, just in case it is faulty. The problem persists... The thing that is hanging the probing session comes after PLIP. That's where the boot process always stops... Next thing is to remove the hard

...ploying a new set of servers based around Intel P4 800MHZ FSB processors. Currently I'm looking at the following 2 motherboards and I'm wondering how well supported they are under -STABLE (specificaly the ATA and LAN as well as text mode video) Model Chipset ASUS P4P8X Intel 865P ASUS P4P800 Intel 865PE Also I'm looking for recommendations on Dual Xeon boards capable of handling 533MHz FSB 2.4GHz parts. Thanks in advance. -- Darcy Buskermolen Wavefire Technologies Corp. ph: 250.717.0200 fx: 250.763.1759 http://www.wavefire.com

I am using an ASUS P4P800 Deluxe which is a motherboard that has been tested with Asterisk. I am unsure about the PCI slot and IRQ settings in the BIOS and am having problems with a WCFXO card sharing with other devices. Any suggestions on the settings required for Asterisk to avoid IRQ conflicts? Thanks :) ------------...

Hello Hamish. I found your message just googling for Suse and sk98lin. Did you solve your problem? I had the same case and only way to restore was to change NIS driver speed settings from AUTO to 10Mb. And it was not related to OS as the same problem is in WXP ( I have dual boot, ASUS P4P800, integrated GB NIS ). Oleg.

Hi, I would like to boot a LINUX system from an external USB Hard Drive. Motherboard (ASUS P4P800) supports boot from USB with or without floppy emulation. Is it possible to use syslinux for booting without any floppy or CD, just from the external USB drive? Regards... Bela

Hi everybody, I failed to make Samba 3.0.0 /3.0.2a working from Windows side on the slightly different Slackware?s. Last try was the ?current? Slackware version(kernel 2.4.25) of some March 20?s with Samba 3.0.2a in it. Server: Asus P4P800-PIV?RAM 1.5(1)Gb- 3Com 3C940 integrated. Client(s): W2k SP3, Realtek 8139 NIC. Installed OK (binaries from a distribution?), user added OK after useradd to Linux. Share path is owned by that user and 'chmod a+rwx'ed. Swat works OK except that it always insists that smbd is not running(?...

Hi, I have a 1 port T1 card in an asus p4p800-vm board with a 2.0g Celeron, and 512m of 266mhz ram (256 on each channel). This board has video, Ethernet, and serial ata all on-board, I got it because of that, there wouldn't be anything else on the pci bus that would mess with the zaptel card(s). So, here's my problem. I'm runnin...

Dear List, This is my second post since I did not receive any answers the first time. I have P4P800-VM motherboard with serial ata controlers (ICH5) and serial ata discs. I managed to install FreeBSD 4.9-STABLE on this box when setting the IDE controller in legacy mode. Everything works normal except when booting, the drives are set into UDMA33 mode: atapci0: <Intel ICH5 SATA150 controller&g...

...'s local disk. I actually see the client display a message saying booting from local disk but instead of booting the machine displays nothing other than a flashing cursor in top right of screen. Here's a bit more info on the config: Bios boot sequence: floppy, NIC, HDD Motherboard is Asus P4P800, NIC is 3Com 3c940. OS installed on server and client is Redhat 9. I already have a number of other machines (different hardware config) that use the same PXE server and work exactly as expected. syslinux rpm is standard rh 9 version 2.00-4 Some other things I've tried: bios upgrade, Try a di...

...doesn't seem right. Can anyone using the TDM400P and spandsp successfully share their hardware and OS platform? I'm not against ordering hardware, just tired of randomly trying systems that are lying about. I also have one of the motherboards on order recommended from the wiki - an ASUS P4P800 Deluxe - but I'm not sure those recommended were fully tested against the combination above. Thanks in advance - and I'll share the results of the ASUS board as well.. joe

...t, if you look at the manual, it will possibly be in conflict with some USB channels. I believe I may have disabled one of them but in any event I'm not using any USB devices. Otherwise, I didn't have to set up any special IRQ settings. MARK. Reuben Grech wrote: > I am using an ASUS P4P800 Deluxe which is a motherboard that has been > tested with Asterisk. I am unsure about the PCI slot and IRQ settings > in the BIOS and am having problems with a WCFXO card sharing with > other devices. Any suggestions on the settings required for Asterisk > to avoid IRQ conflicts?...

...ancel = yes (have also tried 32, 64, 128, 256; 128 works best so far) -echotraining = 400 (have also tried 200, 400, 800; seems to have no effect, the wiki says the max is higher but asterisk does not like anything higher than 999ms) -Asterisk Ver. 1.0.7 running on P4 3.0Ghz with 2Gb ram and Asus p4p800 mb E&M takes some time for call setup, is Asterisk's echo canceller training during this time? If so would switching to PRI alleviate the problem? Thanks for any help you can offer, -Bill Lattner

...t there were no network errors in ifconfig output. Hi everybody, I failed to make Samba 3.0.0 /3.0.2a working from Windows side on the slightly different Slackware?s. Last try was the ?current? Slackware version(kernel 2.4.25) of some March 20?s with Samba 3.0.2a in it. Server: Asus P4P800-PIV?RAM 1.5(1)Gb- 3Com 3C940 integrated. Client(s): W2k SP3, Realtek 8139 NIC. Installed OK (binaries from a distribution?), user added OK after useradd to Linux. Share path is owned by that user and 'chmod a+rwx'ed. Swat works OK except that it always insists that smbd is not runni...

...Volt. = 3.20, 5.08, 15.50, -0.00, -0.00 Temp.= 255.0, 240.0, 255.0; Rot.= 11250, 270000, 225000 Vcore = 1.57, 3.20; Volt. = 3.20, 5.05, 15.50, -0.00, -0.00 ^C wkb@freebie ~: I'm pretty sure it is the port that has problems, but I'm curious if others have seen this too? This is an Asus P4P800 btw. -- | / o / /_ _ wilko@FreeBSD.org |/|/ / / /( (_) Bulte

Hello all: For fun, I am learning about Asterisk, and trying to get Asterisk working at my house. I installed Asterisk@Home. It seems to be functioning fine. I installed a couple of softphones, and have them registered with Asterisk. I actually work for a CLEC, and I have registered my Asterisk box with SER (which I don't begin to understand yet) at the office. In order to try to