search for: p2p1

...st state UP qlen 1000 link/ether 00:b0:d0:df:e3:1e brd ff:ff:ff:ff:ff:ff inet 192.168.201.1/29 brd 192.168.201.7 scope global em2 inet 4.28.99.161/27 brd 4.28.99.191 scope global em2 inet6 fe80::2b0:d0ff:fedf:e31e/64 scope link valid_lft forever preferred_lft forever 4: p2p1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc htb state UP qlen 1000 link/ether 00:02:b3:a1:9b:03 brd ff:ff:ff:ff:ff:ff inet 65.44.101.162/27 brd 65.44.101.191 scope global p2p1 inet 4.28.99.185/32 scope global p2p1 inet 65.44.101.183/27 brd 65.44.101.191 scope global...

Hello, Anybody else run into problems with biosdevname .0.5..0-2 changing names from p2p1 to em1 when upgrading from biosdevname 0.4.1-3? Darn! I thought biosdevname was to keep the names the same!! -- Stephen Clark *NetWolves Managed Services, LLC.* Director of Technology Phone: 813-579-3200 Fax: 813-882-0209 Email: steve.clark at netwolves.com http://www.netwolves.com

...y"/> </devices> </domain> the host network files: /etc/sysconfig/network-script/ifcfg-br0 DEVICE="br0" TYPE="Bridge" USERCTL="no" BOOTPROTO="dhcp" ONBOOT="yes" NM_CONTROLLED="no" /etc/sysconfig/network-script/ifcfg-p2p1 DEVICE="p2p1" BOOTPROTO="dhcp" BRIDGE="br0" NM_CONTROLLED="no" ONBOOT="yes" TYPE="Ethernet" the fstab of host # # /etc/fstab # Created by anaconda on Fri Jul 26 05:26:08 2013 # # Accessible filesystems, by reference, are maintained under...

...e 4 ports on it (currently configured for local, dmz, and net) and was planning on using the 4th for the new provider. It will be part of a /30 subnet connecting to our ISP. We also have a /27 subnet for public IPs. So my thought is something like: ISP1/27 ISP2/30 |p2p1 |p2p2 +-----------------------+ | firewall/router |---em2 dmz 192.168.201.1/29 | | ISP2/27 +-----------------------+ |em1 loc 10.10.0.1/16 We use nat for some servers on the local network and will want...

Hi everyone, I have a server (ubuntu 14.04 lts) running KVM with a few guests (each with static IP addresses) which I manage using libvirt. This machine has a wired interface (br0 / p2p1) connecting to my internal network and a wireless interface using dhcp (ppp0) as a secondary direct connection to the internet. My goal is route all administration traffic for both the host and guests through the wired interface (br0); while routing the service traffic, and _only_ this traffic...

...face dev=’vf0’ />" in the xml. I try to change as below, but the result is same. ============================ <network> <name>macvtap_passthrough’</name> <forward mode=’passthrough> <pf dev=’p2p1’ /> // p2p1 is intel sriov physical nic </forward> </network> ============================ I don't know how to write correctly. Please help me. You can refer to intel document as below. Many thanks. ==========document from intel===...

I will get back to the mailing list.?? But to answer your questions, yes the IP addresses and interface names are as expected (as before) with the new MAC/HW addresses.? I have someone else looking into it because when we plugged in the cable the light on the card did not light up.?? when we connect the pair server to another separate server it did.? Once the server is back up I will try these

...king.?The light is still out, so it could be the HW. I ran those commands (ip addr show, ip route show) on the 2 servers.? The output is identical except for the IP addresses and the MAC addresses, except on the server with the new card, it is missing the following IPV6 info for the interface name p2p1 which is the interface in question. inet6 fe80::6a05:caff:fe06:9122/64 scope link ?????? valid_lft forever preferred_lft forever Somehow I doubt we are using IPV6 but does it need to be there for some reason?? .... and if so , what do I do about it. I apologize if these questions make no sense.? O...