search for: outsider

hi friend need ur help in dial plan, i want to allow exten 2000 to 2005 can make call outside and exten 2006 to 2010 can not make call outside. heres my dial plan. ? sip.conf ? [general] port = 5060 bindaddr = 0.0.0.0 context = others [2000] type=friend context=outside secret=1234 host=dynamic [2001] type=friend context=outside secret=1234 host=dynamic [2002] type=friend context=outside

Help, I'm stuck. Lost in the woods. I have one Asterisk running on FreeBSD outside on the Wild Internet. One on the safe inside, behind a NAT firewall. The inside server registers with IAX to the outer one and can place calls. The outside one can't register to the one on the inside, since it can't be reached on the private network. Now to my problem: * How do I dial from outside to

Hi, I'm having alot of trouble understanding how to use dialplans for outgoing calls on Dahdi. Context : I have 3 TI spans, so 69 voice channels and three D channels (24,48,72). This is on a TE420B from Digium, if it matters. Here are my (apparently simple) questions in no particular order: 1) Dial(DAHDI/5555555555|20) doesn't work. But Dial(DAHDI/42/5555555555|20) does

Hi I'm new to tinc vpn and I am currently exploring a use-case we have, of creating a secure mesh over which our own services may run. This may be a basic question, I wasn't able to find a satisfying answer. What is the significance of port 655 with regards to tinc? Lets consider a 4 node setup: We have nodes: [protected] : protected behind a private network in the cloud [bastion]:

Hi all The machine provides the name service I got the following in the dmesg. What is it? Can I have rules to prevent it? UDP: bad checksum. From outside-ip:61479 to machine-ip:61 ulen 45 UDP: bad checksum. From outside-ip:62499 to machine-ip:61 ulen 45 UDP: bad checksum. From outside-ip:64135 to machine-ip:61 ulen 45 UDP: bad checksum. From outside-ip:64135 to machine-ip:61 ulen 45 UDP: bad

I built a CentOS 6 machine to host several CentOS 6 guest servers. As all guests will be Internet facing I set up the host with two bridged NICs and assigned an Internet facing IP address to br0 and a local IP address to br1. Each guest was installed using br0 and br1 with virtio drivers. On each I assigned an Internet facing IP address to eth0 and a local IP address on eth1. So far so good. I

Hello, My asterisk currently will dial an outside number after I dial the number and press send on the phone. How can I get it setup so I have to press '0' for an outside line. Kind regards Michael Felder IT Medic Australia Pty. Ltd. P: 03 9557 2213 F: 03 9557 2214 M: 0419 568 217 E: Michael@ITMedic.com.au http://www.ITMedic.com.au Keeping your computer systems healthy.

Hi, I was reading some loop related code and I don’t quite understand an assertion in LoopBase<BlockT, LoopT>::getLoopPredecessor(). /// getLoopPredecessor - If the given loop's header has exactly one unique /// predecessor outside the loop, return it. Otherwise return null. /// This is less strict that the loop "preheader" concept, which requires /// the predecessor to have

Hi, I have a small callcenter with 3 agents who login using AgentCallbackLogin. They normally receive calls, but needs to call outside also. When they call outside, though they are busy the "show agents" shows them as available, and calls gets routed to them. How can I make them busy when they call outside. Also they also need to move out for couple of minutes or to send a mails

Hello.... Asterisk is compiled and running perfectly... But when i try to compile Channel_h323... that's another story :-|. I'm compiling using RH9, OpenH323_1.12.2, pwlib_1.5.2, i compiled and installed them myself... GnuGk is running smoothly using them. Also my intention is to terminate calls from a SIP client through Asterisk and into my GnuGK... has anyone accomplished this ?

I'm trying to move the asterisk server to an Amazon Web instance. We have teliax for our sip provider. I'd like for our DID lines to be connected to a users cell phone. Seems simple enough, but I'm getting the dreaded one-way audio, even with nat=yes everyplace I can think of. The dialplan is real easy: [from-teliax-sip] exten => _j.,1,NoOp("From teliax sip with exten

Hi friends, There are about 15 applications hosted on different in our infrastructure mostly running on apache/iis/tomcat. We have a frontend apache server running on Centos 4.4 64bit which make these applications accessible to outside world. For the applications which are running on tomcat we are running jkmount to make these applications available without mentioning tomcat ports. For

Hi, My project is outside of LLVM. Now I need get LoopInfo for a function. I know that if my project were a pass inside LLVM. I can get LoopInfo by "AU.addRequired<LoopInfo>()" and "getAnalysis<LoopInfo>()". Also I know I can get a function pass by "llvm::FunctionPass* dce = llvm::createDeadCodeEliminationPass(); dce->runOnFunction(*func)" outside of

On Wed, Jun 21, 2017 at 04:57:23PM -0700, Nirmal Thacker wrote: > What is the significance of port 655 with regards to tinc? This port is officially reserved for tinc. It is also below number 1024, which means that on most operating systems, only a priviliged user can listen on that port, and prevents regular users from starting tinc on port 655. However, you don't have to use port 655,

Hi, I am seeing constant "Log synchronization error"s in my logs. See later for an example. This is dovecot 2.2.4, pigeonhole 0.4.1, and postfix 2.10.1 (with mailbox_command = /usr/libexec/dovecot/deliver) on a Fedora 19 system. I am using packages from Atrpms so there are some patches applied - ask for details. The mailboxes have resently been moved from a i386 system. I have

Has anyone set it up so that an inside call and an outside call get different unavailable messages? j

How many of you are using Rails: 1. As the primary development tool at your Day Job 2. As a small part of your Day Job 3. Not using Rails in your Day Job, but are using Ruby 4. For OS/outside work/hobby -- sam http://www.magpiebrain.com/

I have been trying to setup a PAP2 adapter on a remote network but can't seem to get it to work. The unit will register with the server and it can make calls to extensions on the Asterisk server but it can't receive any calls and it can't make any calls outside of the Asterisk server. I also have a eyebeam soft phone that works when it is inside the network but when I am on other

I checked through the archives and I didn't see this one. This has been driving me absolutely crazy for months now and I finally tumbled to what was going on. I get hesitations of up to 2 minutes from some of our XP machines when printing to a printer on the Samba server. My first suspicion was that it was some kind of name resolving issue. I tried using the domain name of the Samba

Working with a number of scripts (text files with R commands) that I "source" into R sessions from time to time. The source() command is most convenient (at least for me) if it only loads function definitions, and doesn't otherwise change the interactive environment. For example, I might have a file that looks like func1<-function() { code code code } # this