Hi, I'm having alot of trouble understanding how to use dialplans for outgoing calls on Dahdi. Context : I have 3 TI spans, so 69 voice channels and three D channels (24,48,72). This is on a TE420B from Digium, if it matters. Here are my (apparently simple) questions in no particular order: 1) Dial(DAHDI/5555555555|20) doesn't work. But Dial(DAHDI/42/5555555555|20) does work. How is this "42" parameter used? I see plenty of examples around, but no explanations. Is this the channel? If so, why doesn't DAHDI/3 work? 2) "dahdi show channels" in the CLI show my inbound used channels correctly, but not my outbound. My outbound never show up, even during a conversation. Thanks for helping me figure this out. Mike -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091204/85ab0928/attachment.htm
Simple explanation for #1; it's dial tech/port/number. Dahdi/3 would open DAHDI port 3 for an outgoing call. For #2, you should be using core show channels instead of dahdi show channels. Dsc shows the lines that are available to asterisk, csc shows the ones in use. _____ From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Mike Sent: Friday, December 04, 2009 1:02 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: [asterisk-users] DAHDI outgoing Hi, I'm having alot of trouble understanding how to use dialplans for outgoing calls on Dahdi. Context : I have 3 TI spans, so 69 voice channels and three D channels (24,48,72). This is on a TE420B from Digium, if it matters. Here are my (apparently simple) questions in no particular order: 1) Dial(DAHDI/5555555555|20) doesn't work. But Dial(DAHDI/42/5555555555|20) does work. How is this "42" parameter used? I see plenty of examples around, but no explanations. Is this the channel? If so, why doesn't DAHDI/3 work? 2) "dahdi show channels" in the CLI show my inbound used channels correctly, but not my outbound. My outbound never show up, even during a conversation. Thanks for helping me figure this out. Mike -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091204/adc7c167/attachment.htm
Thank you, at least I am getting the same thing. Mike> -----Original Message----- > From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users- > bounces at lists.digium.com] On Behalf Of Jim Dickenson > Sent: Friday, December 04, 2009 16:37 > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] DAHDI outgoing > > On my * 1.6.0.13 box I see this: > > dahdi show channels > > Chan Extension Context Language MOH Interpret Blocked > State > pseudo nonesaid en default > In Service > 1 4151111111 from-outside en default > In Service > 2 from-outside en default > In Service > 3 from-outside en default > In Service > 4 from-outside en default > In Service > 5 from-outside en default > In Service > 6 from-outside en default > In Service > 7 from-outside en default > In Service > 8 from-outside en default > In Service > 9 from-outside en default > In Service > 10 from-outside en default > In Service > 11 from-outside en default > In Service > 12 from-outside en default > In Service > 13 from-outside en default > In Service > 14 from-outside en default > In Service > 15 from-outside en default > In Service > 16 from-outside en default > In Service > 17 from-outside en default > In Service > 18 from-outside en default > In Service > 19 from-outside en default > In Service > 20 from-outside en default > In Service > 21 from-outside en default > In Service > 22 from-outside en default > In Service > 23 from-outside en default > In Service > > In this case I had an inbound call to one of my DID numbers for this PRI > line. It showed the DID on the port 1 line. If I made an outbound call > nothing showed for the port used. To see that I needed to do the command > "core show channels" and then I saw this for the outbound channel in use: > > DAHDI/23-1 (None) Up AppDial((Outgoing Line)) > > I do not see a way to do any summary reports directly in CLI. > -- > Jim Dickenson > mailto:dickenson at cfmc.com > > CfMC > http://www.cfmc.com/ > > > > On Dec 4, 2009, at 11:51 AM, Mike wrote: > > > Or am I misunderstanding the displayed information? What I was looking > for was a list of channels that shows which one is currently busy, and > ideally also a way to know how many channels are used per span (although I > could work it out from the former if it was available) > > > > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users