search for: outbounds

I appologize for the long, new-ish question, but after a few days of trying to work a solution by reading through the list archives and WIKI and coming up with what I thought would work, I think I'm just not getting a fine detail. I titled this thread "Setting up Security Groups" because I'm trying to set up some sip user groups with certain calling rights, e.g., one group of

Hello All, Looking for a little guidance on Real Time Pattern Matching. We are attempting to block outbound 411 via when someone dials NXX-555-XXXX, The must common being NXX-555-1212. However, We have some outbound providers that consider any call to NXX-555-XXXX a directory assistance call. So simply making my pattern _NXX5551212 doesn't work. So as you can see from the lines

Ok Dan, try this... I was able to get this to work behind a NAT and with ip address authentication. [global] type = global debug = yes [transport1] type = transport bind = 0.0.0.0 protocol = udp *local_net=<yourlocalnet I.E. 10.10.10.10/24 <http://10.10.10.10/24>>external_media_address=<your public ip address>external_signaling_address=<your public address>*

Hello All. I am trying to use RAGI the ruby agi framework with trixbox. I am having a problem with the dialout part. The RAGI framework creates a file in the /var/spool/asterisk/outgoing directory and routes the call to an extension (I have listed the relevent portion of the file below). The problem is that the initial dial command does not execute properly in trixbox. I am hoping somebody who

Not sure why, but Vitelity changed the settings to IP based authentication on me. Here's the new sip.conf settings they sent me. type=friend dtmfmode=auto host=64.2.142.93 allow=all nat=yes canreinvite=no trustrpid=yes sendrpid=yes When I use these settings to originate calls using the sip.conf they sent me, everything works. Action: Originate ActionID: S8 Channel:

Hi All, I setup auto dial on my asterisk server. The problem is asterisk does not wait for called party to answer the call but proceed to process the extension specifed in my .call file My sample call file : hannel: local/0124787924@outbound-reminder MaxRetries: 5 RetryTime: 300 WaitTime: 40 Account: Reminder context: remindem extension: s priority: 1 Set: MSG=0135.20070601.0124787924 Set:

What I am trying to do is the following: A call is sent to the * box via a SIP invite. The * box answers via an IVR menu system with " Enter the extension you want to dial" so I enter in my 5 digit extension and get the below message. Jan 18 10:10:03 WARNING[-1380238416]: channel.c:1860 ast_request: No channel type registered for 'SIP)' Jan 18 10:10:03 NOTICE[-1380238416]:

Well it appears i have no clue what im doing. I thought i had the below script working to shape outbound ftp traffic....however, it is shaping inbound traffic too. I have NO clue why. Please comment if anyone has any ideas why this doesnt work. I want to shape only outbound ftp traffic and not inbound or lan traffic. #!/bin/bash #shaping passive and active outbound ftp traffic on an

Hello, I want to use Asterisk to use Kamailio as an outbound proxy for routing calls to remote SIP end points, one option could be to use a default peer, but in my case, my outbound proxy can change based on the remote end point, so this option doesn't work. And another problem is that I don't know how to configure Asterisk to prepare the Request-URI based on the remote end point and not

Hello all, Here is my problem, I try to place a call to FWD (free world dialup) trough my asterisk PBX. my config is as follow: extensions.conf ---------------- [internal] exten => 613,1,Dial(IAX2/iaxfwd-outbound/613) (service echo de FWD) exten => xxxxxx,1,Dial(IAX2/iaxfwd-outbound/xxxxxx) mon numero FWD exten => yyyyyy,1,Dial(IAX2/iaxfwd-outbound/yyyyyy) celui d'un ami FWD

Hi I need a small PBX for use on the move. This means that outbound calls will need to be made over the cell phone network. Assuming a small hardware PBX with a spare mini-PCI slot or a USB slot then what hardware options do I have to get an outbound cellular channel? Options need to be rock solid, so no bluetooth to a cell phone kind of solutions need apply. Can any of the 3G usb

Greetings list, Over the last few days I've been gearing up to replace a couple of our servers with 1.6 as something of a testbed, but I'm encountering a few problems, and wondering if anyone can help... In extensions.conf, there are a number of contexts defined for each group of users, along the lines of: [groupa] [groupb] etc. In each of those, there's a command include =>

Recently, I've been having issues with the URIs returned from e.164.org and toll free calls. It seems that the URIs that are returned from ENUMQUERY and ENUMRESULT are no longer the proper numbering schemes that the poviders use. I've been using the following [enum] template in my outbound route for quite some time with great success until recently. [enum](!) exten =>

I have two asterisk servers. One is at location 1 and the other is at location 2. What I am trying to do seems straightforward. I want the Asterisk server at location 2 to send all it outbound calls to the Asterisk Server at location 1. Both asterisk servers can dial each other using extensions without a problem, but when users on Asterisk server 2, dial 9XXX-XXX-XXXX the call never reaches

Hi There, We have single PRI with multiple DID numbers and its working fine in receiving call. And if you make outbound call it will send main-line CallerID (company name). Now we want individual caller id for per extensions on outbound calls. like if i call someone he will get my extension as callerid ( 617-838-XXXX) XXXX is my sip extension something like this so next time i direct get call

Here's an update... My network admin would not turn off the ALG because it would cause several other problems to other phone systems we have. He looked at the sip trace. What he found is the PJSIP trace showed a different IP address than the older chan_sip so he had me change the aor contact to outbound.vitelity.net At this point, it seems to be working (and this is going through a Cisco

>In theory yes, but it is shaping inbound transfers to my server. >YOu''re not doing any other sort of Ingress filters are you?? No >I dont care about destination port. That line was commented. BUT, incoming transfers are being shaped for some reason. >Could this be shaping on the ISP side?? What >happens when the tc rules >are shut off?? No, everything works fine

Hello! I've run into a problem where a user is making an outbound call at the same time that an inbound call is being made on the same analog line. It appears that as the zap channel is opened for the outbound call, it is simply answering the inbound call. Obviously, both parties involved in the calling get a bit confused. Previously, it happened only on an occasional basis. However, as this

On Mon, Dec 15, 2014 at 3:54 PM, Dan Cropp <dan at amtelco.com> wrote: > > Yes, everything is behind the same NAT. > > > > For the application I?m working on, the only endpoint is the endpoint to > Vitelity. > > We use AMI to Originate calls from Asterisk endpoint through Vitelity to > phones. > > After that, we control the call through AMI to perform the

I've searched around and found a few similar situations where the phone will call out when using a Asterisk server but not receive inbound calls. My issue is a little stranger. If I call out from the phone then the phone will receive the next inbound call. The phone will not receive another inbound call until a call out again from it first. Any ideas? I am using SIP and am using the latest