search for: or600elcdrm1u

On Sun, 27 Oct 2019, EP wrote: > I can't imagine that's the way cyberpower wants their unit to work. With this > behavior the unit does exactly the opposite of what it is built for. It > doesn't protect your equipment. It will destroy it because the server which > was just shutted down cleanly will boot again on a battery-powererd ups. What > a crap. > > But I

Hello, I installed NUT on raspberry pi as a NUT-Server. It works fine so far with a Cyberpower OR600ELCDRM1U (used driver: usbhid-ups). The Pi recognizes power loss and shuts down itself and the ups as it should. Problem: The UPS comes up immediately after shutting down. This is a big issue because there is no power, the server (NUT-Slave) begins powering up and the battery will drain within one minut...

...ems to be unattended: Init SSL without certificate database battery.charge: 64 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 960 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 13.4 battery.voltage.nominal: 12 device.mfr: CPS device.model: OR600ELCDRM1U device.type: ups driver.name: usbhid-ups driver.parameter.ondelay: -1 driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 10 driver.parameter.port: auto driver.parameter.synchronous: no driver.version: 2.7.4 driver.version.data: CyberPower HID 0.4 driver.version.internal: 0.41 input.transf...

...ter report of the ups: Init SSL without certificate database battery.charge: 47 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 998 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 13.6 battery.voltage.nominal: 12 device.mfr: CPS device.model: OR600ELCDRM1U device.type: ups driver.name: usbhid-ups driver.parameter.ondelay: 0 driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 10 driver.parameter.port: auto driver.parameter.synchronous: no driver.version: 2.7.4 driver.version.data: CyberPower HID 0.4 driver.version.internal: 0.41 input.transfe...