search for: openswitch6

Seems strange to me that I should be having this problem but I'm stumped. I'm still playing with a Voicetronix OpenSwitch6 card and Asterisk (development CVS). I using a dialplan that's derived from one on another running installation that's using Digium FXS/FXO interfaces instead of the OpenSwitch card. It seems that as soon as a user on an FXS interface dials 7 digits, a call is placed even though the dialp...

...rs tracking down the source of the echo to no avail, enabled mark2 echo cancel and aggressive echo cancel to get the system to where the customer was satisfied with the performance. Came back to the lab, pulled out a duplicate system, had the same problem. So I swapped out the Digium card with an OpenSwitch6, all of my problems went away! No echo, great call volumes and better yet, I picked up the ability to swap the ports from FXS to FXO. I will admit there was some difficulty with the vpb drivers as some things have changed in the >2.6.11 kernel that cause it to fail, but Voicetronix support was...

Hello, I would like to know if voicetronix card (specially openswitch6 and 12) can be used with asterisk. Is there any driver for this card? Best regards, Daniel -- Daniel ANDRE (mailto:dandre@iris-tech.fr) IRIS Technologies - http://www.iris-tech.com Serveur kwartz - http://www.kwartz.com

...t seem to connect to an actual outside line. All lines have been tested with analog handsets and are working properly. Can anyone offer any guidance? /etc/asterisk/vpb.conf: [general] ;type = v12pci type = v6pci ;type = v4pci cards = 1 [interfaces] board = 1 echocancel = on callerid = on ; For OpenSwitch6 ; Note that V6PCI channel numbers start at 7! context = default mode = immediate group = 1 channel => 7 channel => 8 channel => 9 channel => 10 channel => 11 ;channel = 12 -- Alok K. Dhir <adhir@symplicity.com> Symplicity Corporation http://solutions.symplicity.com 703 351 69...

I'm working on putting together some Ideas about using Asterisk in our environment, one of the things I want to consider is DID trunks (analog), what hardware do I need to terminate these trunks? I'm looking at the voicetronix openswitch6 or openswitch12. On the openswitch, I'd like to use some of the lines for analog sets for the breakroom, kitchen, etc where they don't need all the cool features, and the other lines for POTS/DID trunks. Also how mature is this for production environment? I envision using mostly VOIP pho...

Hello all, I hope this is not off-topic, if it is please let me know. I'm currently playing with an Asterisk at home, in order to get to know it's ins and outs. Very very impressive indeed. I've got it hooked up to my home phone line via a Wildcard clone board (Intel modem with Ambient chipset), and it works like a charm. Zaptel picks up the card as a generic clone, and works with it