search for: openswitch

Hello all - I'm trying to get Asterisk working with an Openswitch/6 card with all ports set to FXO for PSTN in/out, and 10 SIP phones on the LAN with the Asterisk server. The SIP phones are working properly to dial one another, but I can't seem to get a call to go out to the PSTN through the voicetronix, and I similarly can't get incoming calls to t...

Attached is the updated driver, thanks to Mark's advice. It now does pretty good audio, although when you dial another channel via Asterisk you get some echo. This I have not been able to solve quite yet (using voicetronix echo cancelling doesn't seem to do it). If anyone can figure it out, would appreciate. Thanks P. Ps. Unpack inside asterisk code directory. Replaces your makefile

Hello, Hacker I install VoiceTronix OpenSwitch 12 port PCI Telephone Card, and setting vpb.conf, extensions.conf following My problem is: When i dial to fxo(channel 9-12), it is ok, but when i continue press exten 102, the channel crach with error messages following exception caught: VPBAPI_DIAL_INVALID_LEVEL, file: vpbdial.cpp line:872 Do i...

...alog FXO woes was to look into using a Voicetronix card instead of the Digium. They're more expensive but if it worked better it may be reasonable. They indicated they were compatable with the CVS HEAD version of *. Can someone share with me their experiences with Voicetronix OpenLine and/or OpenSwitch cards with *? I'm specifically interested in FXO handling and any issues with echo, inbound DTMF detection, and inbound fax detection. Thanks in advance, Paul PS: Feel free to reply directly if you'd rather not clutter a Digium list with Voicetronix traffic. -- Paul A. Dugas...

In my search for a better analog FXO interface, I'm looking into the Voicetronix cards. Can someone let me know if they've been using the OpenSwitch cards with Asterisk? Also, can anybody comment on the differences in FXO performance between the OpenCall and OpenSwitch cards? Thanks in advance, Paul -- Paul A. Dugas Dugas Enterprises, LLC email: paul@dugasenterprises.com 1711 Indian Ridge Drive phone...

If there is a power failure, which cards other than x100p and voicetronix openswitch provide "redundancy".

Hi, As I see blogs or websites the openvswitch is support XCP and Xenserver. But to support opensource Xen 4.2.1 what should be configure and how to interface with openflow . I have tried using vif-openswitch network script for bridging, while adding datapath using ovs-dpctl add-dp xenbr0 it is added but ovs-dpctl dump-flows xenbr0 it is getting ovs-dpctl: opening datapath (No such device). Can you suggest any configuration for openflow with openvswitch. With Regards Prapulla Kumar R _______________...

...le goes, my attempts include: 1) Setting channels 1 and 2 as FXO, channels 3 and 4 as immediate 2) Setting channels 1 and 2 as FXO, channels 3 and 4 as dialtone 3) Setting channels 1-4 as FXO i may have something mixed up here, has anyone had any success with this? note that i'm not using the OpenSwitch card, it's the OpenLine. Thanks, Faiz

dear Hackers, i have a voicetronix Openswitch card, and i have been finding it very dificult to get it to work with asterisk. i intend to connect 8 ports to the PSTN and 4 as station ports. problem 1: On running asterisk all i get at first i get : event[9=>[11] station OFF hook] on vpb/1-12 even [12=>[11] loop drop on vpb/1-12 event...

Folks, In light of all the troubles people report when running more than one TDM400 card in a system, I wouldn't mind hearing what your solution of choice would be when having to connect 5 or more analog telco circuits to an Asterisk. I'll try and compile the answers together and get them into the Wiki, as I figure this could be useful knowledge for the community. TIA, Jim. -- Jim

I would just like to get a refresh of the situation for Australian users. It would seem that the TE400P is currently available and is likely to acheive approval for use in Australia within the next 2 months ? (when is the end of summer?). Once this is done, it will certainly suit larger installations, but it still leaves a number of 'gaps'. Anyone with analog phone lines will need

Has anyone gotten the voicetronix boards to work with Asterisk, what would it take? Or does anyone know where I can get 4 ports or more fxs PCI cards that do work with asterisk? Brian J. Schrock Network Engineer, RHCE, CCNA Anistone Technologies Phone: 614-798-9106 FAX: 614-573-7165 6926 Avery Rd. Dublin, OH 43017

Good people, Please find attached a first shot at a driver for the Voicetronix OpenSwitch hardware. It does work (ish). After paying $900-odd for it I figured I might try to make it work with Asterisk (could never get enough documentation on Bayonne!) I have problems with the audio quality, and since am new to Asterisk, I could really do with some input. First is that because the...

Hello, I would like to know if voicetronix card (specially openswitch6 and 12) can be used with asterisk. Is there any driver for this card? Best regards, Daniel -- Daniel ANDRE (mailto:dandre@iris-tech.fr) IRIS Technologies - http://www.iris-tech.com Serveur kwartz - http://www.kwartz.com

...ou Wrote --- From: "Jacky" <jacky.taiwan@msa.hinet.net> To: <asterisk-users@lists.digium.com> Date: Tue, 16 Dec 2003 19:05:27 +0800 Subject: [Asterisk-Users] Help! VoiceTronix Multi FXO/FXS Problem Reply-To: asterisk-users@lists.digium.com Hello, Hacker I install VoiceTronix OpenSwitch 12 port PCI Telephone Card, and setting vpb.conf, extensions.conf following My problem is: When i dial to fxo(channel 9-12), it is ok, but when i continue press exten 102, the channel crach with error messages following exception caught: VPBAPI_DIAL_INVALID_LEVEL, file: vpbdial.cpp line:872 Do...

I'm working on putting together some Ideas about using Asterisk in our environment, one of the things I want to consider is DID trunks (analog), what hardware do I need to terminate these trunks? I'm looking at the voicetronix openswitch6 or openswitch12. On the openswitch, I'd like to use some of the lines for analog sets for the breakroom, kitchen, etc where they don't need all the cool features, and the other lines for POTS/DID trunks. Also how mature is this for production environment? I envision using mostly VOIP ph...

Seems strange to me that I should be having this problem but I'm stumped. I'm still playing with a Voicetronix OpenSwitch6 card and Asterisk (development CVS). I using a dialplan that's derived from one on another running installation that's using Digium FXS/FXO interfaces instead of the OpenSwitch card. It seems that as soon as a user on an FXS interface dials 7 digits, a call is placed even though the dial...

Hi all, I am trying to compile openswitch's kernel module in a CentOS 6.4 host, but fails in rpm-check: Requires: kernel(__alloc_percpu) = 0x55f2580b kernel(__alloc_skb) = 0x25421969 kernel(__dev_get_by_index) = 0x6a6d551b kernel(__init_waitqueue_head) = 0xffc7c184 kernel(__ip_select_ident) = 0x848695b3 kernel(__kmalloc) = 0x5a34a45c...

Does the voicetronix card work with Asterisk? -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of woody+asterisk@solutionsfirst.com.au Sent: Monday, February 02, 2004 11:06 PM To: asterisk-users@lists.digium.com Subject: RE: [Asterisk-Users] Pictures of new multiport FXO/FXS from digum > -----Original Message-----

I am planning to schedule a monthly XCP meeting for the community and am struggling with when to host the call. As we are a global community, there is no single optimal time to host the meeting. In an effort to support the most likely attendees, please send me your time zone if you plan to participate in these calls. I will track the most common time zones in an effort to maximize attendance. All