search for: openprint

On Fri, 21 Aug 2015, Eero Volotinen wrote: Hello Eero, > Well, is it really supported on Linux? I can't find driver for it on: > http://www.openprinting.org/printers I just saw that. I now have it so that it prints a few pages, then locks up the printer. Funny, it worked just fine under CentOS5, now under CentOS 6, it won't? That's weird. Do you, or anyone else, have any suggestions? Gilbert *****************************************...

...ba4? Further, by setting "bind interfaces only = no" in smb.conf, smbd listens on IPv6 wildcard address. However, the point and print operation fails using IPv6 link-local address. It throws up "Operation could not be completed error 0x00000709" on the client. The smbd log says OpenPrinter error. _spoolss_OpenPrinterEx: Cannot open a printer handle for printer \\<ipv6.linklocal.addr>.ipv6-literal.net Is OpenPrinter suppose to work with IPv6 link local address on Samba4? This used to work fine with Samba3.5. Thanks, SambaUser

I changed this week to Ubuntu from winows 7. I spent the last few days trying to get World of Warcraft to run. After tossing lots of code at this and days on the net I was able to get it to work using PlayOnLlinux and WINE. Today...I thought I would work on getting my MS Office 2010 to install and work. I hosed every thing. Had MSXML issues and sorm rtpd4.dll file I had to down load and over

I've mentioned this before, here, but with a laser printer connected via the lp0 port. I have a new laser printer, a Brother HL2140, that normally works just fine when installed using the CUPS interface per OpenPrinting's instructions (with one minor modification I had to add because the base driver without the CUPS installation did not work. Every so often, which actually appears to be every time the printer goes into power-saver mode, when I try to print something, I get this response in lpstat -t: [mhr...

On Fri, 21 Aug 2015 11:51:27 -0500 (CDT) Gilbert Sebenste wrote: > On Fri, 21 Aug 2015, Eero Volotinen wrote: > > Hello Eero, > > > Well, is it really supported on Linux? I can't find driver for it on: > > http://www.openprinting.org/printers I can find it there: http://www.openprinting.org/printer/HP/HP-LaserJet_P4014 Says it works "perfectly". > I just saw that. I now have it so that it prints a few pages, then locks > up the printer. Funny, it worked just fine under CentOS5, now under CentOS >...

Hi, Has anyone had any success using a Canon LBP5300 with CentOS or any other RH type os for that matter, using the rpms and intructions downloaded from the Canon website? I have it working on XP and OS X both via USB and network but am having no success with either on CentOS 5.4 . Print jobs seem to be processed correctly by CUPS but the printer doesn't respond at all and the jobs show

Hello all Sorry for posting my query here, but did not have any success in getting feedback from linuxprinting.org/ openprinting.org forums. Planning to buy a new colour MFD or a Mono MFD & a Colour printer, for small buisiness office use. Could someone give feedback on HP Laserjet MFD M3027x and Laserjet 2840? Do all functions provided by the printers work on Linux? Any kinks? Do Network Fax features of M3027x w...

Epson doesn't seem to have one; I see an rpm at openprinting.org, but that .rpm d/l I started around 11:30 my time, and the d/l slowed, and slowed, and it's been at 21% and "1 hr 17 min to go" for it seems like close to half an hour. I d/l a tar.bz2, but I'm not sure I want to build and install it - my use of this printer is temporary, a...

Hey All, Could someone provide a URL to a page that states what LSB level RHEL/CentOS 6.4 is certified to. I'm looking to download a driver: http://www.openprinting.org/printer/Epson/Epson-WorkForce_1100 They offer a driver for LSB 3.1 or LSB 3.2. I'm hoping that one of those applies to CentOS 6.4. -- _ ?v? /(_)\ ^ ^ Mark LaPierre Registered Linux user No #267004 https://linuxcounter.net/ ****

...e a reconstructed file, which won't have this particular problem. "qpdf" tries very hard to be "loss-less" about its transformations, so once you verify that the reconstructed file is fine, you can replace the original with it. -- Best regards, Ivan [1] https://github.com/OpenPrinting/cups/issues/321#issuecomment-1246741326 [2] https://openpreservation.org/blogs/trouble-shooting-pdf-validation-errors-a-case-of-pdf-hul-38/

...differentiating factor is that under normal circumstances, the NT/2000 client will attempt to open the network printer using MS-RPC. The problem is that because the client considers the printer to be local, it will attempt to issue the OpenPrint erEx() call requesting access rights associated with the logged on user. If the user possesses local administator rights but not root privilegde on the Samba host (often the case), the OpenPrint erEx() call will fail...

...sounds like a permission problem. Using FileMon from SysInternal I see spoolsv.exe returning a ACCESS DENIED error. A ethereal dump shows communications between the client and the Samba Server. A level 4 debug level from Samba shows: [2005/09/20 14:31:16, 3] smbd/reply.c:reply_printopen(3535) openprint fd=5 fnum=9756 [2005/09/20 14:31:16, 3] smbd/process.c:process_smb(1114) Transaction 566 of length 41 [2005/09/20 14:31:16, 3] smbd/process.c:switch_message(900) switch message SMBsplclose (pid 758) conn 0x8311a10 [2005/09/20 14:31:16, 4] smbd/uid.c:change_to_user(217) change_to_user: Skippin...

...ent logs. So very annoying to find. Package list debian. ii cups 2.2.1-8 amd64 Common UNIX Printing System(tm) - PPD/driver support, web interface ii cups-browsed 1.11.6-3 amd64 OpenPrinting CUPS Filters - cups-browsed ii cups-bsd 2.2.1-8 amd64 Common UNIX Printing System(tm) - BSD commands ii cups-client 2.2.1-8 amd64 Common UNIX Printing System(tm) - client programs...

...wrote: > On Fri, 21 Aug 2015 11:51:27 -0500 (CDT) > Gilbert Sebenste wrote: > > > On Fri, 21 Aug 2015, Eero Volotinen wrote: > > > > Hello Eero, > > > > > Well, is it really supported on Linux? I can't find driver for it on: > > > http://www.openprinting.org/printers > > I can find it there: > http://www.openprinting.org/printer/HP/HP-LaserJet_P4014 > > Says it works "perfectly". > > > > I just saw that. I now have it so that it prints a few pages, then locks > > up the printer. Funny, it worked ju...

Hello everyone, I have been scouring the Internet for answers, wikipages, non-Centos pages, and I am stumped. I have a HP LaserJet P4014n. When I plugged it in via USB cable, it found it as a P4014, but in any case, it simply wouldn't print, so I deleted it, and tried to start from scratch. When I manually add the printer, it seems all is well, but it won't print a test page. In my

I can't get my HP DeskJet D2345 (USB) to work on my CentOS 5.3 machine. It'll work on another machine (with Fedora 7). I compared the installation details (in CUPS http://localhost:631) - seems that Cent does not have the driver. On the F7 machine, the device is "D2345 (HP D2300 series)" and the driver is "HP DeskJet D2300 Foomatic/hpijs". When I try to config my

Hai Tomas, And Marc thank for having a look also. @ Tomas, now i think you setup is ok, but review it based on my setup below. Now, i am using samba 4.6.8 here, but this is working as of 4.2.x. There where a few small problems, i just cant recall exact what these where. If you want to stay in the 4.5 line, then its an option to try my 4.5.14 package if needed. I did some testing also, my

Since my old Epson C86 has finally managed to clog up the print heads, I'm in the market for a replacement. I'd like to know what the people on this list are using for printers that are currently available, since we are using versions of CUPS and foomatic that are frozen, and any other issues or "gotchas" that you are aware of. For the replacement printer, I'm considering a

Well, is it really supported on Linux? I can't find driver for it on: http://www.openprinting.org/printers -- Eero 2015-08-21 19:23 GMT+03:00 Gilbert Sebenste <sebenste at weather.admin.niu.edu> : > Hello everyone, > > I have been scouring the Internet for answers, wikipages, non-Centos > pages, and I am stumped. > > I have a HP LaserJet P4014n. When I plugged...

...SetUpPrinterListCombo Can't find '(null)' in printer list so trying to find default err:commdlg:PRINTDLG_ChangePrinter Can't open printer Wine PostScript Driver err:commdlg:PRINTDLG_ChangePrinter Can't open printer Wine PostScript Driver fixme:commdlg:PRINTDLG_WMCommand Call to OpenPrinter did not succeed! fixme:commdlg:PRINTDLG_UpdatePrintDlg No lpdm ptr? fixme:commdlg:PRINTDLG_WMCommand Update printdlg was not successful! I set win.ini according to howto, same with registry and config. Version is 0.0.20010112-3 on a debian box with 2.4.1 kernel. Any idea? -- Tschoe,...