search for: offline_uncorrectable

...as amazed at what I saw; see a few of the attributes listed below 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail - 2600 9 Power_On_Hours 0x0032 098 097 000 Old_age - 2106 12 Power_Cycle_Count 0x0032 100 100 000 Old_age - 80 198 Offline_Uncorrectable 0x0030 196 196 000 Old_age - 398 200 Multi_Zone_Error_Rate 0x0008 180 180 000 Old_age - 4077 So for a brand new packaged drive this was a bit of a surprise. "2106" power on hours, obviously should be zero for a new drive and "398" "Offline...

...0 194 Temperature_Celsius 0x0022 028 033 000 Old_age Always - 28 (Min/Max 20/33) 195 Hardware_ECC_Recovered 0x001c 120 120 000 Old_age Offline - 9127078 196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0 198 Offline_Uncorrectable 0x0010 120 120 000 Old_age Offline - 75479755259904 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 201 Unknown_SSD_Attribute 0x001c 120 120 000 Old_age Offline - 9127078 204 Soft_ECC_Correction 0x001c 120...

...] md127 : active raid10 sdf1[2](F) sdg1[3] sde1[1] sdd1[0] 1949480960 blocks super 1.2 512K chunks 2 near-copies [4/3] [UU_U] bitmap: 15/15 pages [60KB], 65536KB chunk smartctl reports this for sdf: 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 1 198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 6 So it's got 6 bad blocks, 1 pending for remapping. Can I clear the error and rebuild? (It's not clear what commands would do that.) Or should I buy a replacement drive? I'm considering a WDS100T1R0A (2.5" 1TB red drive)...

Hi, Recently I've decided to play with gjournal. Main reason was a promise of avoiding full fsck check after unclean shutdown. I've successfuly configured gjournal on existing filesystems (all UFS). And then it happened - my system had a power failure. After boot, it forced me to run fsck manualy. Nothing special, I did it before... But this time it failed on gjournaled disks.

...ways - 44531 194 Temperature_Celsius 0x0022 098 083 000 Old_age Always - 49 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 192 192 000 Old_age Always - 1423 198 Offline_Uncorrectable 0x0030 196 196 000 Old_age Offline - 700 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 001 001 000 Old_age Offline - 793265 SMART Error Log Version: 1 No Errors Logged SMART...

...- 26 194 Temperature_Celsius 0x0022 032 053 000 Old_age Always - 32 (0 21 0 0 0) 195 Hardware_ECC_Recovered 0x001a 103 099 000 Old_age Always - 6218970 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged I have removed most of snapshots, it does not help. I have stopped all active processes, disk load did...

...) sdg1[3] sde1[1] sdd1[0] > 1949480960 blocks super 1.2 512K chunks 2 near-copies [4/3] [UU_U] > bitmap: 15/15 pages [60KB], 65536KB chunk > > smartctl reports this for sdf: > 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always > - 1 > 198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline > - 6 > > So it's got 6 bad blocks, 1 pending for remapping. > > Can I clear the error and rebuild? (It's not clear what commands would do > that.) Or should I buy a replacement drive? I'm considering a WDS100T1R0A...

...e Always - 28 194 Temperature_Celsius 0x0022 121 115 000 Old_age Always - 31 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 1 198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 I assume, raw read error rate is ok. So I would use th...

...ays - 0 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 1 7 Seek_Error_Rate 0x000f 086 060 030 Pre-fail Always - 440801014 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_a...

...Always - 4026 194 Temperature_Celsius 0x0002 183 183 000 Old_age Always - 30 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 10 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 367 SMART Error Log Version: 1 ATA Error Count: 431 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Featur...

...308 194 Temperature_Celsius 0x0002 176 176 000 Old_age Always - 34 (Lifetime Min/Max 22/51) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 dmesg | grep sda EXT3-fs warning (device sda5): ext3_unlink: Deleting nonexistent file (2982233), 0 Any tips?

...x 30/34) 194 Temperature_Celsius 0x0022 032 040 000 Old_age Always - 32 (0 25 0 0) 195 Hardware_ECC_Recovered 0x001a 065 056 000 Old_age Always - 173161329 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Ol...

I'm looking to do a bit more monitoring of my 3ware 9550 with smartd, and wanted to see what others were doing with smart for monitoring 3ware hardware. Do you have the smartd.conf configured to test, or simply monitor health status? Are you monitoring the drive as centos sees it (/dev/sdX) or are you using the 3ware /dev/twaX for monitoring? Opinions and discussions are welcome :-P --

...ge Always - 1 194 Temperature_Celsius 0x0022 117 109 000 Old_age Always - 33 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 1 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 1 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 1 SMART Error Log Version: 1 No Errors Logged SMART Self-t...

...s - 184 194 Temperature_Celsius 0x0022 134 108 000 Old_age Always - 18 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 051 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-t...

...- 16 193 Load_Cycle_Count 0x0032 098 098 000 Old_age Always - 4551 194 Temperature_Celsius 0x0022 033 040 000 Old_age Always - 33 (0 21 0 0 0) 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 267112606073648 241 Total_LBAs_Written 0x0000 100 2...

...44531 >194 Temperature_Celsius 0x0022 098 083 000 Old_age Always > - 49 >196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always > - 0 >197 Current_Pending_Sector 0x0032 192 192 000 Old_age Always > - 1423 >198 Offline_Uncorrectable 0x0030 196 196 000 Old_age Offline > - 700 >199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always > - 0 >200 Multi_Zone_Error_Rate 0x0008 001 001 000 Old_age Offline > - 793265 > >SMART Error Log Version: 1 >No E...

...- 308088 194 Temperature_Celsius 0x0022 121 089 000 Old_age Always - 26 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 051 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-...

...29 (0 9 0 0) 195 Hardware_ECC_Recovered 0x001a 038 026 000 Old_age Always - 173060773 196 Reallocated_Event_Count 0x0033 089 089 036 Pre-fail Always - 243 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 24 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 1 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Se...

Hello list I've been running the following command, first in fc20 and then now (since the beginning of March) in fc26: now=$(date +"%Y%m%d-%H%M"); sudo rsync -ahuAESX -vi /home/ /run/media/readlegal/Backup/home > /run/media/readlegal/Backup/rsync-changes_$now Since the move to fc26, this command has caused the complete freeze/crash of the system. I tried it under multi-user