search for: oad

Hi, i use an BN4S0 with misdn an asterisk on Linux 2.6.9. The hfcmulti module is loaded with option: type=0x04 protocol=0x2,0x2,0x22,0x2 layermask=0xf,0xf,0xf,0xf and the fourth port is connected to an ISDN PTMP (MSN) port. Call to #72 from S0 (BN port 4) are not accepted from asterisk but why ? Can anyone give me a hint ?? misdn debug messages follows: lib: NEW_CR Ind with...

...ing .rd help files and now when R build the help pages it reports "missing link(s): ~~fun~~. What is going on? Below is the code from the help file and the associated s4 method. Any help would be greatly appreciated. Steve GENERIC FUNCTION AND METHODS setGeneric("getRemovedDf.OAD",function(x,y,z,simplify=TRUE,descrip=FALSE){st andardGeneric("getRemovedDf.OAD")}) setMethod("getRemovedDf.OAD","status.or.rm.v1", function(x,y,z,simplify,descrip){ if(length(0">x@removed) <mailto:x@removed)> >0){ pred &...

...river on the IPBX itself. I'm stuck ... Any advices for troubleshooting that? Someone provide working configuration files for such setup ? HERE IS THE LOG FOR THE PROBLEM ..... obelix*CLI> misdn set debug 1 [P[ 2] channel with stid:0 for one second still in use! P[ 2] I IND :NEW_CHANNEL oad:61049_____ dad:0404 pid:27 state:none <------------------------------------------- FIRST INCOMING CALL P[ 2] Chan not existing at the moment bc->l3id:4001c bc:0x86af954 event:NEW_CHANNEL port:2 channel:2 P[ 2] NO USERUESRINFO P[ 2] I IND :SETUP oad:610493763 dad:0404 pid:27 state:none P[...

...runs into a timeout... I don't know where to set that timeout, but it's way to short for the called to pick up the phone. If the destination phone is picked up, then everything is allright and the connection stays open for as long as none of the phones get hung up... P[ 1] I IND :SETUP oad:010618115711 dad: P[ 1] --> mode:NT cause:16 ocause:16 rad: P[ 1] --> info_dad: onumplan:2 dnumplan: rnumplan: P[ 1] --> channel:0 caps:Speech pi:0 keypad: P[ 1] --> Bearer: Speech P[ 1] --> Codec: Alaw P[ 0] --> * NEW CHANNEL dad: oad:010618115711 P[ 1] read_config: Gettin...

...his difference do anything? my mISDN config is also below should that be of any help. Telecom: (No DTMF) Connected to Asterisk 1.2.13 currently running on PROHOST100 (pid = 4481) Verbosity is at least 3 -- Remote UNIX connection P[ 4] set_channel: bc->channel:0 channel:1 P[ 4] I IND :SETUP oad: dad:9298 pid:3 state:none P[ 4] --> channel:1 mode:TE cause:16 ocause:16 rad: cad: P[ 4] --> info_dad: onumplan: dnumplan:0 rnumplan: cpnnumplan:0 P[ 4] --> caps:Audio 3.1k pi:3 keypad: sending_complete:1 P[ 4] --> Bearer: Audio 3.1k P[ 4] --> Codec: Alaw P[ 0] --> * NEW...

...context here ; ; default value: default ; context=default ; language ; ; default value: en ; language=en ; ; sets the musiconhold class ; musicclass=default ; ; Either if we should produce DTMF Tones ourselve ; senddtmf=no ; Prefixes for national and international, those are put before the ; oad if an according dialplan is set by the other end. ; ; default values: nationalprefix : 0 ; internationalprefix : 00 ; nationalprefix=0 internationalprefix=00 ; set rx/tx gains between -8 and 8 to change the RX/TX Gain ; ; default values: rxgain: 0 ; txgain: 0...

Hello, After upgrading my kernel to mISDN-1.1.1 while keeping asterisk-1.2.16 I no longer match any extension. Apparently the "dad" is empty. However I can see the number just before it (146472130): P[ 4] I IND :SETUP oad:!?145201798p ?146472130 dad: ?146472130 pid:2 state:none P[ 4] EXPORT_PID: pid:2 Mar 23 09:35:28 WARNING[6725]: chan_misdn.c:4750 chan_misdn_log: Extension can never match, so disconnecting P[ 4] I SEND:RELEASE oad:!?145201798p ?146472130 dad: ?146472130 pid:2 P[ 4] --> bc_state:BCHAN_C...

...PBX4Linux ** Version 2.5 (August 2004) Port 1: NT-mode BRI S/T interface port (for phones) -------- when I try a call I have the following messages (with debug =4 ) routeur*CLI> dial 100@tel -- Executing Dial("OSS/dsp", "misdn/1/100") in new stack * NEW CHANNEL dad: oad:100 ctx: * IND : CALL dad:100 tech:misdn/1/100 ctx: * --> Setting Context to Intern * Queuing chan 0x80cb358 * List is empty so new chan is Listroot I SEND:SETUP pid:-1 mode:NT addr:51300101 --> dad: 100 oad channel 0 port 1 $$$ bc already upsetted stid :10000101 --> pid 25 --> oa...

...m the asterisk cli when i receive a call: P[ 5] MGMT: Short status dinfo 1000001 P[ 5] MGMT: SSTATUS: L1_ACTIVATED P[ 5] handle_frm: frm->addr:42000503 frm->prim:3f082 P[ 5] handle_frm: frm->addr:42000503 frm->prim:30582 P[ 5] set_channel: bc->channel:0 channel:1 P[ 5] I IND :SETUP oad:4656708 dad:465670127 P[ 5] --> mode:TE cause:16 ocause:16 rad: cad: P[ 5] --> facility:FAC_NONE out_facility:FAC_NONE P[ 5] --> info_dad: onumplan:2 dnumplan:2 rnumplan: cpnnumplan:0 P[ 5] --> screen:0 --> pres:0 P[ 5] --> channel:1 caps:Speech pi:0 keypad: P[ 5] --> ur...

I am trying to use misdn insted of zaphfc to drive two billion isdn cards zaphfc is ok, but the problem with cdr and the fact tha you always have to wait the bristuffed version of asterisk took me to try another way. so I downloaded the misdn installation script from beronet for the last version ( I am using asterisk stable 1.2, so now is 1.2.5) wget http://www.beronet.com/downloads/install-misdn-mqueue.tar.gz tar -zxvf install-misdn-mqueue.tar.gz cd /usr/src/install-misdn-mqueue make make install everything OK /etc/init.d...

...rxgain:0 txgain:0 --> * dad:118913 tech:mISDN/2-u25 ctx:default --> * Setting Context to from-tpnet --> TON: Unknown --> TON: Unknown --> PRES: Allowed (0x0) --> SCREEN: Unscreened (0x0) --> * adding2newbc ext 118913 --> * adding2newbc callerid 717201234 I SEND:SETUP oad:717201234 dad:118913 port:2 --> mode:TE cause:16 ocause:16 rad: --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 --> channel:0 caps:Speech pi:0 keypad: --> urate:0 rate:0 mode:0 user1:0 --> pid:0 addr:51400102 l3id:11000c --> new_l3id 11000e --> * SEND: State Dialing pid:43...

I hadn't used FWD for quite a while. A customer sent me an email last week, "Is FWD broken when one tries to use it with IAX?" I have been playing around, and indeed seems to be the case. Is there anyone out there successfully using the two of them together? Thanks. B. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be

I have a North American BRI configured as National ISDN (NI-1) on an SBC (Nortel?) switch. SBC calls this "FastTrak ISDN", and it's surprisingly inexpensive -- less than two POTS lines. I've been trying to find an inexpensive PCI interface solution to connect this to Asterisk as voice lines. I prefer ISDN BRI over POTS lines because of the improved signalling, fast dialing,

...Wed Nov 5 21:04:15 2008: P[ 2] --> new_process: New L3Id: 4004e Wed Nov 5 21:04:15 2008: P[ 2] handle_frm: frm->addr:42000203 frm->prim:30582 Wed Nov 5 21:04:15 2008: P[ 2] set_channel: bc->channel:0 channel:1 Wed Nov 5 21:04:15 2008: P[ 2] $$$ find_chan: No channel found for oad:610493763 dad:0412 Wed Nov 5 21:04:15 2008: P[ 0] get_index: event not found! Wed Nov 5 21:04:15 2008: P[ 2] I IND :NEW_CHANNEL oad:610493763 dad:0412 pid:74 state:none Wed Nov 5 21:04:15 2008: P[ 2] --> channel:1 mode:TE cause:16 ocause:16 rad: cad: Wed Nov 5 21:04:15 2008: P[ 2] --...

...d the associated s4 method. >>>>> >>>>> Any help would be greatly appreciated. >>>>> >>>>> Steve >>>>> >>>>> GENERIC FUNCTION AND METHODS >>>>> >>>>> setGeneric("getRemovedDf.OAD",function(x,y,z,simplify=TRUE,descrip= >>>>> FA >>>>> L >>>>> SE){st >>>>> andardGeneric("getRemovedDf.OAD")}) >>>>> >>>>> setMethod("getRemovedDf.OAD","status.or.rm.v1", &gt...

...R|REQ (tei_l2) Asterisk shows: P[ 1] MGMT: SSTATUS: L1_ACTIVATED P[ 1] handle_frm: frm->addr:42000103 frm->prim:3f082 P[ 1] channel with stid:0 not in use! P[ 1] handle_frm: frm->addr:42000103 frm->prim:30582 P[ 1] set_channel: bc->channel:0 channel:1 P[ 1] I IND :NEW_CHANNEL oad:xxx dad:12345 pid:2 state:none P[ 1] --> channel:1 mode:TE cause:16 ocause:16 rad: cad: P[ 1] --> info_dad: onumplan:2 dnumplan:4 rnumplan: cpnnumplan:0 P[ 1] --> caps:Speech pi:0 keypad: sending_complete:1 P[ 1] --> screen:0 --> pres:0 P[ 1] --> addr:0 l3id:20007 b_sti...

...t; -->> An misdn debug doesn't seem to reveal any errors setting the caller -->> id: -->> -->> P[ 0] --> Group Call group: ISDN_GROUP -->> P[ 1] Group [ISDN_GROUP] Port [1] -->> P[ 1] portup:1 -->> P[ 0] --> * NEW CHANNEL dad:656660499 oad:(null) -->> P[ 1] * Queuing chan 0xf651398 -->> P[ 1] read_config: Getting Config -->> P[ 1] config_jb: Called -->> P[ 1] --> * CallGrp: PickupGrp: -->> P[ 1] --> TON: Unknown -->> P[ 1] --> LTON: Unknown -->> P[ 1] --> CTON: Unknown...

...y configured/connected. Debug for misdn is set to 0x3 When I dial from outside, mu console (lots of -vvvvv's:) gives: Asterisk Ready. *CLI> P[ 0] MGMT: SSTATUS: L1_ACTIVATED P[ 1] MGMT: SSTATUS: L2_ESTABLISH *CLI> P[ 1] set_channel: bc->channel:0 channel:1 P[ 1] I IND :NEW_CHANNEL oad:056230210 dad: pid:2 state:none P[ 1] --> channel:1 mode:TE cause:16 ocause:16 rad: cad: P[ 1] --> info_dad: onumplan:0 dnumplan: rnumplan: cpnnumplan:0 P[ 1] --> caps:Audio 3.1k pi:0 keypad: sending_complete:1 P[ 1] Chan not existing at the moment bc->l3id:20003 bc:0x8568aa4 event...

...ippet : ......... *CLI> --> lib: NEW_CR Ind with l3id:20052 port:1 --> new_process: New L3Id: 20052 --> Pres:0 --> Screen:3 --> cap speech lib Got Prim: Addr 41400001 prim 30582 dinfo 20052 I IND :SETUP pid:3 mode:TE addr:0 port:1 --> l3id:20052 cause:16 dad:222223 oad:9543000 channel:28 port:1 $$$ find_chan: No channel found for oad:9543000 dad:222223 --> Keypad: --> Bearer: Speech --> Codec: Alaw --> orig Numplan: Unknown --> dest Numplan: Unknown --> * NEW CHANNEL dad:222223 oad:9543000 ctx:dss1_incoming --> Setting Pickupgroup --&...

...id: -->> > -->> -->> > -->> P[ 0] --> Group Call group: ISDN_GROUP -->> > -->> P[ 1] Group [ISDN_GROUP] Port [1] -->> > -->> P[ 1] portup:1 -->> > -->> P[ 0] --> * NEW CHANNEL dad:656660499 -->> > oad:(null) -->> > -->> P[ 1] * Queuing chan 0xf651398 -->> > -->> P[ 1] read_config: Getting Config -->> > -->> P[ 1] config_jb: Called -->> > -->> P[ 1] --> * CallGrp: PickupGrp: -->> > -->> P[ 1] --> TON: Unk...