search for: numdevic

The btrfs-progs tools changed the output: - 100GiB instead of 100GB - The number of spaces was changed Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> --- common/filter | 2 +- common/filter.btrfs | 3 ++- tests/btrfs/006 | 6 +++--- tests/btrfs/006.out | 36 ++++++++++++++++++------------------ 4 files changed, 24 insertions(+), 23 deletions(-) diff --git

hi all, i have applied all patches and compiled the kernel (2.4.21), iptables (1.2.9) and iproute2 (2.4.7-now-ss020116) however when i run "modprobe imq numdevs=1", the system returns - imq.o: init_module: Device or resource busy the transcript is below - [root@vmlinux project]# modprobe imq numdevs=1 /lib/modules/2.4.21-BW/kernel/drivers/net/imq.o: init_module: Device or resource busy

Hi ! I have a single host which is connected via an 512kbit ADSL link to the n= et. I quite often use some realaudio application that uses some bandwidth = and I want to avoid other traffic to scale that bandwidth down. So I used = some classes (with htb) on imq0 device and applied some filters and it see= ms to work in most cases. However, there are some sites with which downloa= d is

hi all, i want to try htb3 with imq downloaded & patched imq & htb3 with kernel-2.4.18 on rh7.2 but got STUCK on step 1 :( this are what i did can anyone guide me what went wrong on the first step itself !! [root@cab1 root]# modprobe imq numdevs=1 modprobe: Can''t locate module imq [root@cab1 root]# [root@cab1 root]# tc qdisc add dev imq0 handle 1: root htb default 1 Cannot find

bridge was configured with "brctl" three NIC was bind to br0 imq and htb was used to control traffic. #modprobe imq numdevs=3 "htb scripts" #iptables -t mangle -A PREROUTING -i br0 -j IMQ --todev 1 #ip link set imq1 up but this can not do the traffic controling. please tell me how can i do _________________________________________________________ Do You Yahoo!? 银行巨头聚会中原

HTB and imq was used to control traffic. modprobe imq numdevs=3 but only imq0 and imq1 can be used; if there are five NICs, please tell me how can I can use imq2 , imq3 and so on. _________________________________________________________ Do You Yahoo!? 新鲜到底,娱乐到家 - 雅虎推出免费娱乐电子周报! http://cn.ent.yahoo.com/newsletter/index.html _______________________________________________ LARTC mailing list /

''imq-2.4.18.diff-9'' patched to kernel18 and ''iptables-1.2.6a-imq.diff-3'' patched to iptables-1.2.6a the following options are choosed: Networking options ---> IP: Netfilter Configuration --->IMQ target support (as a module) Networking options ---> IPv6: Netfilter Configuration --->IMQ target support Network device support --->IMQ

Hi all and tc Gururs i have patched the IMQ and htb to kernel, but when i do egress filtering, iam not able to see any traffic and excusted the following the commands modprobe imq numdevs=1 tc qdisc add dev imq0 handle 1: root htb default 1 tc class add dev imq0 parent 1: classid 1:1 htb rate 100kbit tc qdisc add dev imq0 parent 1:1 handle 10: htb default 1 tc class add dev imq0 parent

Hi I try setup imq pseudo device for shaping I''m work such script #!/bin/sh TC=/sbin/tc /sbin/modprobe imq numdevs=1 /sbin/ip link set imq0 up $TC qdisc add dev imq0 handle 1: root htb default 1 $TC class add dev imq0 parent 1: classid 1:1 htb rate 10mbit # client1 tunnel tunnel $TC class add dev imq0 parent 1: classid 1:2 htb rate 256kbit $TC filter add dev imq0 protocol ip parent 1:0

ingress can be used to control the incoming packet, such as: tc qdisc add dev eth0 handle ffff: ingress tc filter add dev eth0 parent ffff: protocol ip prio 5 u32 match ip src 172.16.1.11 police rate 10kbit burst 10k drop flowid :1 tc filter add dev eth0 parent ffff: protocol ip prio 5 u32 match ip src 172.16.1.22 police rate 10kbit burst 10k drop flowid :2 first ,I do not sure these method can

mdew:~# tc qdisc add dev imq0 handle 1: root htb default 12 r2q 1 Cannot find device "imq0" mdew:~# lsmod Module Size Used by Not tainted ipt_REDIRECT 728 0 (autoclean) ipt_MARK 728 2 (autoclean) iptable_mangle 2100 1 (autoclean) ipt_REJECT 2712 4 (autoclean) iptable_filter 1672 1 (autoclean)

Hello, I wrote a simple traffic shaping script (below) that should have allowed me to shape my internet traffic a bit (ppp0 - adsl 128kbit/64kbit; local interface eth0). The script works only partially - the speed is being limited but too much. Without running this script my download rate is about 10kBytes (with second computer also downloading at about 6kBytes). After running it my download speed

Hi everyone, after following in the footsteps of the following discussion (http://lists.xenproject.org/archives/html/xen-users/2013-09/msg00106.html) I had been able to turn my GTX 480 into a Quadro 6000. When I VT-d passthrough it to a Debian jessie VM it shows up fine and CUDA 5.5 seems to function properly up to a point: lspci -v: 00:04.0 VGA compatible controller: NVIDIA Corporation GF100GL

I am attempting to implement IMQ on a 2.4.31 version kernel with iptables 1.3.3. I am following the example at http://www.linuximq.net/usage.html. When I enter the line iptables -t mangle -A POSTROUTING -o eth1 -j IMQ --todev1 (eth1 is the external interface), the computer slows to a crawl. OK, the CPU is only an AMD K6 233 which is not the world''s greatest CPU, but egress shaping is

Why am I getting giants on imq0? How do I stop that? ========== imq0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 UP RUNNING NOARP MTU:1500 Metric:1 RX packets:39880312 errors:0 dropped:0 overruns:0 frame:0 TX packets:39878715 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1024 RX

Hello, does anyone have a working solution for the shaping both incoming and outgoing traffic in such way, that for a given client the *sum* of incoming and outgoing traffic is somehow defined? My ISP does the same thing, it gives me just a line of a defined rate, no matter the traffic direction (i.e. here is your line, the clock speed is 1024kbps, do what you want). I''m a litte bit

Hi everyone, after following in the footsteps of the following discussion (http://lists.xenproject.org/archives/html/xen-users/2013-09/msg00106.html) I had been able to turn my GTX 480 into a Quadro 6000. When I VT-d passthrough it to a Debian jessie VM it shows up fine and CUDA 5.5 seems to function properly up to a point: lspci -v: 00:04.0 VGA compatible controller: NVIDIA Corporation GF100GL

Hello, I have HTB on IMQ device. My rate does not work as I configured. I configured 1920kbit/s and I can download only about 290kbit/s (while it should be the whole bandwidth). My script: /sbin/modprobe imq numdevs=1 /usr/local/sbin/tc qdisc del dev imq0 root 2> /dev/null > /dev/null /usr/local/sbin/tc qdisc del dev imq0 ingress 2> /dev/null > /dev/null /sbin/ifconfig imq0 down

Hello everyone. CONFIGURATION DESCRIPTION: I have a linux box doing masquerade for two lan''s. Here is a piece of mine network config: eth0 : ISP , one public ip address (DSL modem) eth1 : lan , private network address fe: 192.168.4.0/24 eth2 : wlan access point performing as lan2wlan bridge , private network addes fe. 192.168.67.0/24 This box use 2.6.20 kernel with iptables-1.3.8

Hi, I''ve read ADSL-Bandwidth-Management-HOWTO http://www.tldp.org/HOWTO/ADSL-Bandwidth-Management-HOWTO/implementation.htm l#AEN166 and I''ve a doubt from script: [ ... ] # DNS name resolution (small packets) iptables -t mangle -A MYSHAPER-OUT -p udp -j MARK --set-mark 21 [ ... ] That is a bug ? I think that " DNS name resolution (small packets) " is better