search for: ntdebugflag

...ing an midsn NT port that feeds into following dialplan context: [intern] exten => _X.,1,Macro(dial) How is this done properly with misdn? Thanks, Arik PS: I am using the following options in misdn.conf (basically they are the defaults): [general] misdn_init=/etc/misdn-init.conf debug=0 ntdebugflags=0 ntdebugfile=/var/log/misdn-nt.log bridging=no stop_tone_after_first_digit=yes append_digits2exten=yes dynamic_crypt=no crypt_prefix=** crypt_keys=test,muh [default] context=misdn language=de musicclass=default senddtmf=yes far_alerting=no allowed_bearers=all nationalprefix=0 internationalprefix...

...ing [outgoing] exten =>_9XXXXXXXX,1,Dial(mISDN/1/${EXTEN},45,tTwW) exten =>_9XXXXXXXX,2,Hangup() exten =>_9XXXXXXXX,102,Hangup() [default] exten => s,1,Answer() exten => s,2,Wait(1) exten => s,3,Dial(SIP/101,30,Ttm) misdn.conf: [general] misdn_init=/etc/misdn-init.conf debug=0 ntdebugflags=0 ntdebugfile=/var/log/misdn-nt.log bridging=no stop_tone_after_first_digit=yes append_digits2exten=yes dynamic_crypt=no crypt_prefix=** crypt_keys=test,muh [default] context=misdn language=es musicclass=default senddtmf=yes far_alerting=no allowed_bearers=all nationalprefix=0 internationalprefix...

...calls has no problems. All comment lines has been removed to keep mail size reasonable. /etc/misdn-init.conf: card=1,0x4,dtmf te_ptmp=1,2 nt_ptmp=3,4 option=1,master_clock poll=128 dsp_poll=128 dsp_options=0 dtmfthreshold=100 debug=0 misdn.conf: [general] misdn_init=/etc/misdn-init.conf debug=1 ntdebugflags=0 ntdebugfile=/var/log/misdn-nt.log bridging=yes stop_tone_after_first_digit=yes append_digits2exten=yes dynamic_crypt=no crypt_prefix=** crypt_keys=test,muh [default] context=default language=en musicclass=default senddtmf=yes far_alerting=no allowed_bearers=all nationalprefix= internationalprefi...

...bforce = yes jbmaxsize = 200 jbresyncthreshold = 1000 jbimpl = adaptive jblog = yes This is the relevant part of the misdn-init.conf card=1,hfcpci te_ptp=1,2 poll=128 dsp_poll=128 dsp_options=0 dtmfthreshold=100 debug=0 And this is the misdn.conf [general] misdn_init=/etc/misdn-init.conf debug=0 ntdebugflags=0 ntdebugfile=/var/log/misdn-nt.log ntkeepcalls=no bridging=no l1watcher_timeout=0 stop_tone_after_first_digit=yes append_digits2exten=yes dynamic_crypt=no crypt_prefix=** crypt_keys=test,muh [default] context=misdn language=en musicclass=default senddtmf=yes far_alerting=no allowed_bearers=speec...

Hello everybody. I am trying to configure an Asterisk on Debian with the Billion ISDN card. I am using mISDN. But when I call on the CLI apears this: -- Executing Dial("SIP/101-081805b8", "mISDN/1/943833473|45|tTwW") in new stack -- Called 1/943833473 P[ 1] empty_chan_in_stack: cannot empty channel 255 P[ 1] --> we have already send Release_complete == Everyone is

Hi. When I call my RNIS numbers (with a mobile phone for example), I can see 2 incoming calls on the IPBX, which should not happend. I'm not sure if it's a problem with the telco France Telecom and their ISDN setup, or if it's a problem with the MISDN driver on the IPBX itself. I'm stuck ... Any advices for troubleshooting that? Someone provide working configuration files

I'm wondering if hdlc can be the culprit (not sure what it is and what it does). Should I set hdlc to yes in misdn.conf (I'm asking before testing because this is a production system)? misdn.conf: [general] misdn_init=/etc/misdn-init.conf debug=0 ntdebugflags=0 ntdebugfile=/var/log/misdn-nt.log ntkeepcalls=no bridging=no stop_tone_after_first_digit=yes append_digits2exten=yes dynamic_crypt=no crypt_prefix=** crypt_keys=test,muh [default] context=misdn language=us musicclass=default senddtmf=yes far_alerting=no allowed_bearers=all nationalprefix=0 inter...

Hi, My initial setup for receiving faxes worked as follows: fax call arrives on ISDN BRI connected to a BOSCH PBX, signal sent to ALCATEL PBX via PRI QSIG then finally sent to ASTERISK via PRI EUROISDN. The Asterisk server then forwarded the call to a iaxmodem and HylaFax received the data. All worked fine. Now I got rid of both BOSCH and ALCATEL in the "fax path" and it's as

You're quite right. We'll need to see your misdn.conf file to check the settings. -->> -----Original Message----- -->> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users- -->> bounces at lists.digium.com] On Behalf Of Vieri -->> Sent: 06 February 2009 13:49 -->> To: asterisk-users at lists.digium.com -->> Subject:

...misdn_init: /etc/misdn-init.conf -> debug: 0 -> tracefile: /var/log/asterisk/misdn.log -> bridging: no -> stop_tone_after_first_digit: yes -> append_digits2exten: yes -> dynamic_crypt: no -> crypt_prefix: ** -> crypt_keys: test,muh -> ntdebugflags: 0 -> ntdebugfile: /var/log/misdn-nt.log [PORT 1] -> name: intern -> allowed_bearers: all -> far_alerting: no -> rxgain: 0 -> txgain: 0 -> te_choose_channel: no -> pmp_l1_check: no -> r...