search for: npivs

Hi, i''m having problems attaching disks from a fc-san to a solaris 10 guest. xen host ist a opensolaris box "SunOS node1 5.11 snv_127 i86pc i386 i86xpv". my xen guest is named pg4. this command works fine. virsh attach-disk pg4 /dev/dsk/c8t600A0B800029D69A000013CA4B00E1ABd0 hdb and before i was able to import this volume as a zpool on the xen host - so connection to this

I apologize if this is a little off-topic, but it does relate to Xen and using NPIV on Xen, so I think this is an appropriate forum for the question. I''ve recently begun using NPIV for a couple of Xen PV domUs rather than traditional disk passthrough. My reasons are primarily for performance - I''m hoping that NPIV has lower overhead and lower reliance on the resources of dom0

Hello all, I''m doing some testing with Xen and NPIV disk on the platform SLES 10 SP2 and SLES 11 (xen 3.3). On SLES 10 sp2, I have not encountered major problems during the tests (exept with live migration). I was able to attach a disk with the command "xm block-attach npiv:..." an I am also able to start a VM using a bootable NPIV disk. On sles11, after changing the script

I'm missing something. The purpose of NPIV (as I understand it) is to give a guest OS an HBA that it can scan, play with new luns, etc all without making changes to the physical server(s) the guest is living in currently. However, I can't find a way to either have the guest's XML config create the HBA or for the physical server to successfully GIVE the HBA to the guest. I can give

Hello, I am trying to find out a best practice for a specific scenario. First of all I would like to know what is the proper way to set up multipath, who should care about it the host or the guest. Right now I have a setup where I have one multipath which sets my host to boot from FC SAN. I have another multipathed LUN in the host which is essentially a dm which I attached to a guest, however

Hopefully someone can help get multipath working inside a domU. I'm using Xen 4.2.3 on a SLES 11 dom0, and both a SLES11 domU and a CentOS 6 domU. I'm using NPIV to connect my SAN disks to my domU, and, due to the way my SAN presents the LUNs, need to use multipath inside the domU. I've tried this on both SLES11 and CentOS6 with pretty much the same result. The root issue seems to

Hi again! Need to add here, since I been investigating a bit further, that it seems to be possible to add an NPIV vhba to the guest, using vdsm hooks. I've seen the reference to "host device assignments", which Dan pointed me too, but I didn't really understand the meaning of it at that moment. It would be interesting to hear from someone that have been doing it, how it would

Can anyone point me to a source for the correct syntax to add an npiv disk to a domu? I thought it was disk=[ ''block-npiv:/wwn,xvda,w'' ], I tried just npiv:/ and that didn''t work at all. Thanks -- Rob Aronson Storage, Virtualization and Orchestration Practice Manager, Novacoast USA _______________________________________________ Xen-users mailing list

Is this possible: I would like to have a VM use a FC LUN exported to a virtual wwn (using NPIV) as its primary disk. I was thinking there might be a mechanism to say VM, boot using a LUN with this vwwn as your primary disk? Thanks in advance. -- --------------------------------------------------------------------- Eric Ross HPC Systems Administrator Argonne National Laboratory Leadership

Hi! Report from my multipath tests today. My test virtual machine, that runs from an NPIV pool, is not able to use multipath. When I pulled the cable from one of the targets, it crashed. But, strangely, it could boot up again on that other path, that it just crashed on. That tells me it can use both paths, and is not limited to one of them only, but because the multipath layer isn't

I''m using Xen with SLES10 and am using NPIV to attach FC SAN disks to my domUs. I''ve resize one of the disks on my SAN and I''m wondering if there''s a way to force Xen to rescan/resize the block device without shutting down the domU or unmounting the volume. Thanks, Nick -------- This e-mail may contain confidential and privileged material for the sole use

Hi all, I found a article about Hyper-V virtual Fiber Channel, I think this will make Failover Cluster work if KVM has the same feature. http://technet.microsoft.com/en-us/library/hh831413.aspx Hyper-V uses NPIV for virtual Fiber Channel, I have read some article about KVM NPIV, but how can I config it with libvirt? Any body can show me some example? On Wed, Aug 14, 2013 at 2:33 PM, Timon Wang

Link: http://wiki.libvirt.org/page/NPIV_in_libvirt Topic: Virtual machine configuration change to use vHBA LUN There is a NPIV storage pool defined on two hosts and pool contains a total of 8 volumes, allocated from a storage device. Source: # virsh vol-list poolvhba0 Name Path ------------------------------------------------------------------------------ unit:0:0:0

On 01.02.2016 22:48, Vaknin, Rami wrote: > Hi, > > I'm trying to attach a host FC HBA to VM (NPIV). > > Running ovirt 3.5 on CentOS 6.7, libvirt-0.10.2-46.el6_6.6.x86_64, I created vHBA using nodedev-create command - see below HBA and vHBA. > I wrote a vdsm hook which appends the vHBA xml stanza to the devices xml element but the vm start starts without the vHBA device.

Hi, I'm trying to attach a host FC HBA to VM (NPIV). Running ovirt 3.5 on CentOS 6.7, libvirt-0.10.2-46.el6_6.6.x86_64, I created vHBA using nodedev-create command - see below HBA and vHBA. I wrote a vdsm hook which appends the vHBA xml stanza to the devices xml element but the vm start starts without the vHBA device. Also, when trying to attach the device manually as a live device - I get:

On 02/08/2016 06:01 PM, Vaknin, Rami wrote: > Thank you for your reply, > I'm still getting hard time to attach the hostdev, I couldn't make it work out of the doc. > > I took the address details from: > > # ll /sys/bus/scsi/devices/7:* > lrwxrwxrwx 1 root root 0 Feb 8 12:58 /sys/bus/scsi/devices/7:0:0:0 ->

Thanks for John Ferlan's lots of internal feedbacks, I believe it's more readable, and better orgnized now. Should we create a page for it under http://libvirt.org/deployment.html or add it in WIKI? ========================================== NPIV in libvirt NPIV (N_Port ID Virtualization) is a Fibre Channel technology to share a single physical Fibre Channel HBA with multiple virtual

Thank you for your reply, I'm still getting hard time to attach the hostdev, I couldn't make it work out of the doc. I took the address details from: # ll /sys/bus/scsi/devices/7:* lrwxrwxrwx 1 root root 0 Feb 8 12:58 /sys/bus/scsi/devices/7:0:0:0 -> ../../../devices/pci0000:00/0000:00:03.0/0000:08:00.1/host7/rport-7:0-0/target7:0:0/7:0:0:0 lrwxrwxrwx 1 root root 0 Feb 8 12:58

Before posting it to WIKI or somewhere, I want to see if there is any suggestions on it, or if I missed something. ============================================ How to use NPIV in libvirt I planned to wrote a document about how to use NPIV in libvirt after more features are supported, but it looks like I can't wait till then, got lots lots of questions from both the

Thanks. I have read the link you provide, there is another link which tells me to pass a NPIV discovery lun as a disk, this is seen as a local direct access disk in windows. RAC and Failure Cluster both consider this pass through disk as local disk, not a share disk, and the setup process failed. Hyper-v provides a virtual Fiber Channel implementation, so I wondering if kvm has the same solution