search for: nicolae788

I also operate an HP T1500 G3 which it's an Eaton made UPS. Connected on usb i get frequent communication errors and data aquisition stopped. Mine has a serial connection, also. Operating via serial has no trouble. Maybe it's something related to usb setting in bios, i.e. Legacy mode, speed setting, etc. However on serial mode looks like the eaton or hoe power protector software does not

Zitat von nicolae788 <nicolae788 at gmail.com>: > I also operate an HP T1500 G3 which it's an Eaton made UPS. Connected on > usb i get frequent communication errors and data aquisition stopped. Mine > has a serial connection, also. Operating via serial has no trouble. Maybe > it's something r...

On February 12, 2019 9:37:17 AM UTC, nicolae788 <nicolae788 at gmail.com> wrote: >I also operate an HP T1500 G3 which it's an Eaton made UPS. Connected >on >usb i get frequent communication errors and data aquisition stopped. >Mine >has a serial connection, also. Operating via serial has no trouble. >Maybe >it'...

On Tue, 28 May 2019, nicolae788 wrote: > Apc uses a propietary serial cable and your convertar for sure it's wired > standard. Refer to the following link for info. > https://pinoutguide.com/UPS/apc_smart_cable_pinout.shtml > > Good luck > > On Tue, 28 May 2019, 15:13 , <grumpy at mailfence.com> wr...

...t > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Nut-upsuser digest..." > > > Today's Topics: > > 1. Re: Timer doesn't appear to start (Roger Price) > 2. Re: System with MGE UPS shuts down too early (nicolae788) > 3. Re: System with MGE UPS shuts down too early (Georgi D. Sotirov) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 27 Jan 2020 09:31:49 +0100 (CET) > From: Roger Price <roger at rogerprice.org> > To: nu...

a friend gave me an old apc smart-ups 1250 it has a rs232 interface but i have no pc with a rs232 port i attempted to use a rs232 to usb adapter but the ups goes nuts i connected the ups to batteries and verified it was working properly when i plug the usb cable into the pc the ups shuts down when i attempt to turn it on it beeps twice and shuts down this all occurs before i start the nut software

Hi, recently I observed that during a power outage, my NUT setup doesn't shutdown properly. Indeed it never reaches the LowBattery state to notify and initiate shutdown on clients. Reviewing my setup and logs I think I'm facing multiple problems and I'm unable to point to real root cause. First, let me focus on my scenario and current setup: In normal status (ONLINE, fully charged)

On 1/25/20 10:53 AM, Georgi D. Sotirov wrote: > OK, so yesterday evening I done a real test cutting of the power to > the UPS. And it went good... the UPS supported my server for 28:50 > minutes (i.e. the expected runtime with this load), before forcing > shutdown. The batteries could still hold as charge was 30 % with about > 15 minutes run time. And the UPS did hold for

Hello, Can NUT-CLIENT communicate with a HPE Power Protector server ? The HP T1500 G3 INTL it?s connected to Power Protector server running Windows Server 2012. The Nut-Client it?s installed on a Power Mac G5 running Ubuntu 16.04 / Linux 4.4.0 Thank you ! Alex -------------- next part -------------- An HTML attachment was scrubbed... URL:

Apc uses a propietary serial cable and your convertar for sure it's wired standard. Refer to the following link for info. https://pinoutguide.com/UPS/apc_smart_cable_pinout.shtml Good luck On Tue, 28 May 2019, 15:13 , <grumpy at mailfence.com> wrote: > a friend gave me an old apc smart-ups 1250 > it has a rs232 interface but i have no pc with a rs232 port > i attempted to use

Hello. I sometimes encountered batteries that were ok, but at times one of the cells would develop a random short/open, therefore reducing the real capacity even if voltage reading was ok. In the absence of a battery load tester i would suggest running multiple tests with a load (car headlight bulb or similar) on the battery outside the ups. This is to eliminate the suspicion of a software or UPS

Hello. Battery, battery, battery. I am only thinking at worn batteries. I recently had the same symptoms with an hp/eaton g3 1500va. One of the 3 batteries was reading a healthy 12.8v, but when put under load it would quickly drain. I would measure each battery and test them under load, like with a car headlight bulb switched on both fillaments. On Thu, 23 Apr 2020, 16:54 Marc Franquesa,