search for: netjet

I'm trying to get a basic Asterisk configuration together for ISDN incoming / outgoing calls. I have two Cisco 7905g phones working (at least talking to each other) and have purchased a NETjet-S PCI ISDN card for routing calls to / from ISDN. The state I've managed to get it to is:- -- Executing Ringing("SIP/PHONE2-d557", "") in new stack -- Executing Dial("SIP/PHONE2-d557", "Modem/ttyI0:v0413xxxxxx") in new stack -- Call...

I'm trying to use a Teles (netjet) ISDN BRI card with asterisk 1.2.9.1 Anyone was able to use this card with asterisk? I couldn't find much information about it. Any help?

...i all! I'm new with telephony cards and DAHDI drivers. I have installed Asterisk NOW 3.0.0 and update to Asterisk 11.7.0, modules are update too. I'm following the installation guide of Atcom [1] for AX1600P analogic card, modules are loaded [root at pbx ~]# lsmod | grep -E "hisax|netjet|dahdi" netjet 14618 0 isdnhdlc 4523 1 netjet mISDNipac 33989 1 netjet mISDN_core 73118 3 netjet,mISDNipac hisax 410162 0 isdn 119265 1 hisax dahdi_transcode 5240 1 wctc4xxp dahdi_voicebus...

Hi, I have done my best and tired of searching the net about the problem. If anybody could help would be a great favour. Description of Problem ------------------------ I am trying to install two Netpci cards(Traverse Technology Netjet ISDN-s) on Trixbox 2 and aim is to use in Asterisk as dailin and dialout. I compliled the driver as directed in the manufacture manual. After installation dmesg shows that both of the cards have installed successfully. When testing two problem is there 1) Card one receiving call normally but when...

...alia, so as I understand it, we aren't allowed to use the Zaptel cards. We need to set up our system to route incoming 56K data calls to the PPP daemon on our Linux box or to our Windows 2003 server. I noticed the zapras application - is there any way to achieve this functionality using the NetJet card? What other solutions might exist for us? (I really would rather use VoIP than a silly PBX...) Thanks in advance, Andrew _________________________ Andrew Yager Real World Technology Solutions Real People, Real SolUtions (tm) http://www.rwts.com.au/ _________________________ --------------...

...em/ISDN interface Subsystem: Device b100:0003 Flags: bus master, medium devsel, latency 64, IRQ 20 I/O ports at a000 [size=256] Memory at e2000000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 Kernel driver in use: netjet Kernel modules: wctdm, hisax, netjet FWIW, when I run "modprobe wctdm" followed by "lsmod": # lsmod Module Size Used by wctdm 31892 0 dahdi 180789 1 wctdm netjet 12563 0 isdnhdlc 334...

Hello, I am trying to use 2 netjet cards under asterisk and isdn4linux. I am having a hard time trying to get them to work in terms of dial out. Does anyone have a working config I could look at for even one card (tried that, not much luck either). When i dial out: -- Accepting AUTHENTICATED call from 172.16.11.2, requested for...

...n 2.46.2.5 HiSax: Layer2 Revision 2.30.2.4 HiSax: TeiMgr Revision 2.20.2.3 HiSax: Layer3 Revision 2.22.2.3 HiSax: LinkLayer Revision 2.59.2.4 HiSax: Warning - no protocol specified HiSax: using protocol EURO HiSax: Total 1 card defined HiSax: Card 1 Protocol EDSS1 Id=HiSax (0) HiSax: Traverse Tech. NETjet-S driver Rev. 2.13.2.4 ACPI: PCI interrupt 0000:01:07.0[A] -> GSI 18 (level, low) -> IRQ 201 NETjet-S: TJ300 card configured at 0x2000 IRQ 201 NETjet-S: ISAC version (0): 2086/2186 V1.1 NETjet-S: IRQ 201 count 0 NETjet-S: IRQ 201 count 6 HiSax: DSS1 Rev. 2.32.2.3 HiSax: 2 channels added HiSax...

Well, it has been a long time since I used my NetJet S cards with asterisk (moved to the quad PRI card) but I am trying to get this working again for home use. Basically, what I am using is this: Linux 2.6.8.1: config lines: # ISDN subsystem CONFIG_ISDN=y # Old ISDN4Linux CONFIG_ISDN_I4L=y # CONFIG_ISDN_PPP is not set CONFIG_ISDN_AUDIO=y # CONFIG_IS...

...y configuration -- no spans Empty configuration -- no spans # dahdi_cfg -vvv DAHDI Tools Version - 2.4.1 DAHDI Version: 2.4.1.2 Echo Canceller(s): Configuration ====================== Channel map: 0 channels to configure. # dahdi_hardware driver should be 'wctdm' but is actually 'netjet' pci:0000:01:09.0 wctdm+ e159:0001 Wildcard TDM400P REV E/F Where am I going wrong? Why is dahdi_genconf not seeing the card, when dahdi_hardware does see it? I've tried "modprobe netjet", but makes no difference. Thanks for any suggestions, Sebastian

Hi, I am receiving calls via a Netjet-S card on asterisk, and I notice that whenever I am talkimng to someone, if their voice is loud enough, sometimes asterisk generates a DTMF Tone as they speak. that is played to me. (Caller doesn't hear it). Any ideas how to stop this?

...es? > 2) A faster CPU seems to help (I upgraded from a PII300 to a Athlon > 2200) > 3) When dialling in/out over the ISDN DTMF won't work (at least I > haven't seen the patch which purportedly allows it to work) when you > use the isdn4linux patch. This is specific to the NetJet card once again, right? Time to go hunting for the patch... > 4) Without the above kernel patch you will hear DTMF tones instead of > the other persons voice when they talk. They don't hear the tones or > notice anything wrong. Hmm, not good. Since we want to run a small IVR the DT...

I am attempting to get fax detection to work. I am using a NETjet-s card under ISDN4Linux. Asterisk does not seem to be detecting the fax tone. I have tried following as a test: [MainMenu] exten => s,1,Answer exten => s,2,DigitTimeout(3) exten => s,3,ResponseTimeout(5) exten => s,4,Background(Welcome) exten => s,5,Background(MainMenu) exten =>...

Hi, I am using a Netjet-s ISDN Card, and am having some trouble dialling out (Incoming Works Fine). TRUNK=Modem/ttyI0 exten => _90XXXXXXXXX,1,Dial(${TRUNK}/${EXTEN:1}||Ttm) exten => _90XXXXXXXXX,2,Congestion I get the following when diallingout: -- Starting simple switch on 'Zap/2-1' -- Executing D...

...int I would prefer not to purchase a hardware-based VOIP gateway. I would prefer to use a software-based gateway for research & testing purposes. Could anyone please describe a simple setup? Naturally the connection to the gateway would have to be Austel approved. I have seen references to the Netjet ISDN cards? I am having difficulties in finding information with regards to Austel compliance. Has anyone had experiences with such setups? Any help would be much appreciated. Thank you.

...'ve noticed the AVM cards should work well here, however I've found the reseller here has no website, is listed in Yellow pages as management consultants (??) and when I called quoted almost $400. Does anyone know where I can get the AVMs in Australia a bit cheaper or another card (not the Netjet) that works with Asterisk. Regards, Kimble.

...n using my subscribed address... Apologies to the moderators... --- Hi All, I've successfully got SIP and IAX2 working on Asterisk using X-Lite as a SIP phone and talking to a remote Asterisk over IAX2 using G729. I'm now trying to get an ISDN BRI connection working. I have a Traverse NetJet card (http://www.traverse.com.au/) which I currently have working with isdn4linux (that's how I'm connecting to the Net). I found the a message in the archives (http://www.mail-archive.com/asterisk-users@lists.digium.com/msg32072.html) that says audio support is needed in the hisax driver...

...rt would need to connect to a channel bank which in turn would connect to the telco plus extensions, therefore we are back to the same situation as with analog lines above. So, really, are there any decent solutions for asterisk use in Australia? PS, currently I am using the TDM400B plus Traverse Netjet ISDN with I4L, but this doesn't seem suitable quality for re-sale. Regards, Adam

Looking at installing Asterisk and have not been able to find any info on "minimum" or "recommend" system hardware. I have a box P200MMX 128mb 4.5gb HDD which is running Redhat 8.0 fine. Noticing on the Digium web site it mentions that the single fxo card (Wildcard X100P) requires a minimum pIII 500. Is my intended box going to be too slow? My application is a small level,

I see many posts about using ISDN cards and modem cards. Does this mean I can use a regular modem (that supports voice) as an FXS, or FXO ? If so, can you provide an example. It might be the easiest way to test Asterisk's collaboration with the PSTN (or analog phones) and provide proof of concept to non-believers. Thanks. Shoval -------------- next part