search for: nationalprefix

For whom which may be interested: Here in Italy we have GSM #numbers without leading zero PSTN instead has prefix starting with '0' to have '0' recognized by * i need to insert nationalprefix=0 as Jason Williams suggested me in irc; now, you cannot have: pridialplan=natonal otherwise * will not be able to call GSM phones you need to setup: pridialplan=local prilocaldialplan=local nationalprefix=0 Maurizio

Asterisk 1.8.4-rc2 (and 1.8.3) DAHDI Version: 2.4.1.2 libpri version: 1.4.12-beta3 We are having a problem with getting the nationalprefix option of chan_dahdi.conf to work. National calls do not have a "1" added to them when nationalprefix=1. The PRI debug shows the call coming in as a National Call, but the dialplan sees the call without a 1. chan_dahdi.conf: <snip> switchtype=national internationalprefix = 011 na...

has anyone an idea how to display incoming national/international isdn-pstn-calls correctly to internal isdn AND sccp/sip-phones ? without nationalprefix=0 and internationalprefix=00 I get incoming phone numbers correctly on isdn-phones but the leading zero's are stripped of for non-isdn phones when I set this prefixes inside zapata.conf my internal isdn-phones get this prefix twice... is it possible to unset the prefixes for one or more car...

is where anyone who can tell me how it's possible to set nationalprefix & internationalprefix for a single isdn-card and not for all installed cards ?

...all, to make it possible to answer missed call lists. I'm using the 0 as the prefix for outside lines. I've experimented a little with the prefix settings in zapata.conf, but without success: pridialplan=national ;prilocaldialplan=unknown ;pridialplan = unknown ;prilocaldialplan = dynamic nationalprefix = 00 internationalprefix = 000 Is there a way to debug the ISDN messages coming on my D-channel, like it is shown with misdn? I would like to see the dialplan settings coming from the Network side. best regards -- Alexander Topolanek http://www.topolanek.at

Hi! I have installed two hfc-s cards to handle my pstn calls. I use mISDN with capi, so capi.conf is edited. I have tested both separate and cards are working well. But they are not working together. It seems that when i set up settings for the other card: ;capi.conf: [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 [interfaces] msn=50 incomingmsn=* controller=1 softdtmf=0 context=demo devices=2 msn=50 incomingmsn=* controller=2 softdtmf=0 context=demo devices=2 only controller 1 is working. capiinfo shows me both cards properly. when i tried this capi.conf con...

hi. could somebody explain how exactly the following parameters in zapata.conf work: pridialplan prilocaldialplan internationalprefix nationalprefix localprefix privateprefix unknownprefix the wiki & comments doesn't quite explain them. and phone companies are absolutely no help. i've setup systems in the US & China with trial & error until it works. now i'm setting up a system in Japan and have hard time...

...ARNING[27273] chan_zap.c: Ignoring switchtype Jun 21 12:58:11 WARNING[27273] chan_zap.c: Ignoring pridialplan Jun 21 12:58:11 WARNING[27273] chan_zap.c: Ignoring prilocaldialplan Jun 21 12:58:11 WARNING[27273] chan_zap.c: Ignoring overlapdial Jun 21 12:58:11 WARNING[27273] chan_zap.c: Ignoring internationalprefix Jun 21 12:58:11 WARNING[27273] chan_zap.c: Ignoring nationalprefix Jun 21 12:58:11 WARNING[27273] chan_zap.c: Ignoring localprefix Jun 21 12:58:11 WARNING[27273] chan_zap.c: Ignoring privateprefix Jun 21 12:58:11 WARNING[27273] chan_zap.c: Ignoring unknownprefix Jun 21 12:58:11 WARNING[27273] chan_...

Hi all, I have a problem: On my internal S0 where phones are connected via HFC I get all the number with a leading 0 (either from internal SIP phones or external dialins via CAPI). I don't know where to look for this 0. Any ideas? Greetings, Sven -- Sven Fischer (Dipl.-Phys.) - FACIT Consulting GmbH Hausinger Str. 6 - 40764 Langenfeld Tel: 02173/16700-55 Fax: 02173/16700-60

...assed to the phone. It doesn't work untill I set SetCIDNum(0${PRI_NETWORK_CID}) in extensions.conf which I found in the wiki: http://www.voip-info.org/tiki-print.php?page=Asterisk+zaphfc Is this intended behaviour, or still a bug? It does work but it only shows one zero even though I have nationalprefix = 0 internationalprefix = 00 in zapata.conf I guess it should show a double zero because there is already a zero prefix in the SetCIDNum(0${PRI_NETWORK_CID})? I haven't received any international calls yet but will they not show up with only one zero now? Cheers! Remco

My international calls are not connecting. [general] pridialplan=dynamic ;prilocaldialplan=unknown internationalprefix=00 nationalprefix=0 localprefix= I have the above in my zapta.conf - yet when I dial an international number, I get a ring, then I get the message "the person you are calling, is currently unavailable" This is an ubuntu machine, with a sangoma card, with FreePBX setup, on asterisk 1...

...NFIG FILES: *** /etc/asterisk/misdn.conf: [general] debug=0 method=standard append_digits2exten=yes bridging=yes bridging=no language=fr echocancel=yes echotraining=yes jitterbuffer=4000 jitterbuffer_upper_threshold=0 use_callingpres=yes presentation=allowed [default] context=numeris language=fr nationalprefix=0 internationalprefix=00 rxgain=0 txgain=0 ;dialplan=0 use_callingpres=yes presentation=allowed senddtmf=yes [numeris] context=numeris-in ports=1,2,3,4 msns=* *** /etc/misdn-init.conf card=1,0x4 te_ptmp=1,2,3,4 poll=128 dsp_poll=128 dsp_options=0 dtmfthreshold=100 debug=0 -- Olivier Fauchon...

...usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no internationalprefix=00 nationalprefix=0 overlapdial=no ;Sangoma A101 port 1 [slot:5 bus:3 span:1] <wanpipe1> switchtype=euroisdn echocancel=yes signalling=pri_cpe channel =>1-15,17-31 /etc/dahdi/system.conf: # Span 1: WPE1/0 "wanpipe1 card 0" (MASTER) HDB3/CCS/CRC4 span=1,1,0,ccs,hdb3,crc4 # termty...

...n=1,1,0,ccs,hdb3,crc4 bchan=1-15 dchan=16 bchan=17-31 span=2,0,0,ccs,hdb3,crc4 bchan=32-46 dchan=47 bchan=48-62 zapata.conf [channels] switchtype = euroisdn ;line signalling=pri_cpe pridialplan=unknown switchtype=euroisdn priindication = outofband echocancel=no overlapdial=yes immediate=no nationalprefix= internationalprefix= resetinterval=300 context=pri1 group=1 channel => 1-15 channel => 17-31 ;pbx signalling=pri_net pridialplan=international switchtype=euroisdn priindication=outofband echocancel=no overlapdial=yes immediate=no nationalprefix= internationalprefix= resetinterval=300 contex...

hi, on our incoming E1-PRI from german telco Arcor the leading 0 for the (area access code in europe) and the 00 (country accescode in europe) are missing on incoming callerids. only prepending a single 0 is not the solution as suggested by some writers on this list, because there is no way to differ between national and international callerids and it's not possible to make the decission

...g out time and money, maybe someone else already has done so, and could tell me if it is wortwhile. I only need four B-channels, so two HFC cards should be all I need. Any help, pointers and tips are greatly appreciated. Thanks for your time. rgds pos PS: Current CAPI.CONF settings: [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 [interfaces] msn=123456 echosquelsh=1 incomingmsn=* controller=1 softdtmf=0 context=default ;echocancel=yes ;echotail=64 ;deflect=12345678 devices=2 callgroup=1

...tput of show channels is not showing any channel - should there be 4 channels ? - capi info shows my two cards perfectly. The ISDN Controller's are attached to an PTMP ISDN Line I can't find good documentation about how to configure capi.conf. Here is my actual config (capi.conf) [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 [interfaces] isdnmode=ptmp msn=073266xxxx controller=1,2 context=demo devices=2 incommingmsn=* softdtmf=0 here the output from the chan_capi initialization [chan_capi.so] => (Common ISDN API for Asterisk) May 27 16:47:00 ERROR[1024]: chan_capi....

...no voice signals get through. Unfortunately, Google couldn't help me. Maybe you can? My specifications: - asterisk 1.0.7.dfsg.1-2 - chan_capi 0.3.5-11 - Debian Sarge on Linux 2.6.15.1 - FritzCard module built from the latest sources available by AVM My capi.conf looks like this: [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 [interfaces] msn=3413 incomingmsn=3413 outgoingmsn=3413 controller=1 softdtmf=1 accountcode= context=isdn_incoming If you need any more information on my * configuration, please feel free to ask. Thanks in advance!! Regards, Chr...

Hi chan_capi users, this thing is awesome, no delays like in modem_i4l! Plus, it got those nice ISDN features. Here's my question: Does my service provider (Deutsche Telekom) have to provide me with these Services (CD, ECT)? (the Readme in 0.2.5 says "does not relay on service CD") I know, that I don't have CFU,CFNR,CFBS (which I would have to order seperately). How likely

...t hadn't).... anyway can somone please help me round a config issue? Previously I had a capi.caonf as follows. This config allowed me to have multiple MSN's on the same ISDN/Fritz! card under seperate contexts. ------------------------------------------------------------------ [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.4 echocancel=yes ; [interfaces] context=work_incoming msn=123456 incomingmsn=123456 controller=1 softdtmf=1 accountcode= devices=2 ; context=pers_incoming msn=654321 incomingmsn=654321 controller=1 softdtmf=1 accountcode= devices=2 ----------------------...