search for: n200

...,17-31 ------------------------------------------------------------------------------------------------------------------------------ pri intense debug > TEI: 0 State 4(TEI assigned) > V(A)=0, V(S)=0, V(R)=0 > K=7, RC=0, l3_initiated=1, reject_except=0, ack_pend=0 > T200_id=8192, N200=3, T203_id=0 > [ 00 01 7f ] > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Changing from state 4(TEI assigned) to 5(Awaiting establishment) t200_expi...

...he PBX can be seen at http://www.telephone-engineer.com/downloads/versatility/versatility-installation.pdf Putting the pri span in debug mode I can see the following log continuously scrolling and the PBX never synchronize with the openvox B400P card: PRI Span: 1 TEI=0 MDL-ERROR (G): T200 expired N200 times sending SABME in state 5(Awaiting establishment) PRI Span: 1 Changing from state 5(Awaiting establishment) to 4(TEI assigned) PRI Span: 1 TEI=0 DL event: Q931_DL_EVENT_DL_RELEASE_IND(3) PRI Span: 1 SAPI/TEI=0/0 Kick starting link PRI Span: 1 TEI=0 Sending SABME PRI Span: 1 Changing from state...

...hook localhost*CLI> 2. localhost*CLI> *pri show spans* PRI span 1/0: Provisioned, Down, Active localhost*CLI> pri show span 1 Primary D-channel: 16 Status: Provisioned, Down, Active Switchtype: EuroISDN Type: CPE Overlap Dial: 0 Logical Channel Mapping: 0 Timer and counter settings: N200: 3 N202: 3 K: 7 T200: 1000 T202: 10000 T203: 10000 T303: 4000 T305: 30000 T308: 4000 T309: 6000 T313: 4000 T-HOLD: 4000 T-RETRIEVE: 4000 T-RESPONSE: 4000 Overlap Recv: No 3. localhost*CLI> *pri set debug on span 1* Enabled debugging on span 1 TEI=0 MDL-ERROR (G): T20...

...oip200-021a47e0' What is happening? Could you let me know how to debug or to understand the output from "pri intense debug span 4"? > TEI: 0 State 7(Multi-frame established) > V(A)=30, V(S)=30, V(R)=30 > K=7, RC=0, l3initiated=0, reject_except=0, ack_pend=0 > T200_id=0, N200=3, T203_id=0 > [ 00 01 01 3d ] > Supervisory frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 030 P/F: 1 > 0 bytes of data -- Starting T200 timer Sangoma-Testing*CLI> < TEI: 0 State 8(Timer recovery) < V(...

...Assign awaiting TEI)! [Dec 16 18:59:46] ERROR[12786]: chan_dahdi.c:12630 dahdi_pri_error: Unable to receive TEI from network in state 2(Assign awaiting TEI)! < TEI: 0 State 1(TEI unassigned) < V(A)=0, V(S)=0, V(R)=0 < K=1, RC=0, l3_initiated=0, reject_except=0, ack_pend=0 < T200_id=0, N200=3, T203_id=0 < [ fe ff 03 0f 00 00 04 ff ] < Unnumbered frame: < SAPI: 63 C/R: 1 EA: 0 < TEI: 127 EA: 1 < M3: 0 P/F: 0 M2: 0 11: 3 [ UI (unnumbered information) ] < 5 bytes of data < MDL Message: 4(TEI Identity Check Request) < Ri: 0 < Ai: 127 E:1 Received M...

...1 [ RR (receive ready) ] < N(R): 008 P/F: 1 < 0 bytes of data -- ACKing all packets from 8 to (but not including) 8 -- Stopping T200 timer -- Starting T203 timer Handling message for SAPI/TEI=0/0 TEI: 0 State 7 V(S) 8 V(A) 8 V(R) 8 K 1, RC 0, l3initiated 0, reject_except 0 ack_pend 0 T200 0, N200 3, T203 1 < [ 02 ff 03 08 01 01 05 a1 04 03 80 90 a3 18 01 89 1e 02 84 83 6c 02 21 a3 70 07 81 33 33 36 30 32 37 ] < Unnumbered frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 127 EA: 1 < M3: 0 P/F: 0 M2: 0 11: 3 [ UI (unnumbered information) ] < 30 bytes of data Handling m...

...ug at a time of problems... Is there a problem having 2 telcos on the same PRI card? Would somebody help? asterisk*CLI> pri show span 7 Primary D-channel: 202 Status: Provisioned, Up, Active Switchtype: EuroISDN Type: CPE Overlap Dial: 0 Logical Channel Mapping: 0 Timer and counter settings: N200: 3 N202: 3 K: 7 T200: 1000 T202: 10000 T203: 10000 T303: 4000 T305: 30000 T308: 4000 T309: 6000 T313: 4000 T-HOLD: 4000 T-RETRIEVE: 4000 T-RESPONSE: 4000 Overlap Recv: No and [Mar 18 17:04:05] VERBOSE[19844] chan_dahdi.c: TEI=0 MDL-ERROR (I): T200 expired N200 times sen...

...mediately as "busy". The telco has been working with their switch manufacturer and took the output of "pri show span 1" from me and came back with this: ----quote--- Please check your timers below. How did you determine your settings? * Timer and counter settings: N200: 3 N202: 3 K: 7 T200: 1000 T201: 1000 T202: 2000 T203: 10000 T303: 4000 T305: 30000 T308: 4000 T309: 6000 Our switch: Telcordia National ISDN 2: Range 10 - 90 seconds, default 90 seconds. * T312: 6000 T313:...

...to work... pbx*CLI> pri show span 1 Primary D-channel: 24 Status: Provisioned, Down, Active Switchtype: National ISDN Type: CPE Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer: 4000 T313 Timer: 4000 N200 Counter: 3 Evidently, this is a Lucent 5ess switch but I am supposed to use national. I have tried both, and every combination of pri_cpe, pri_net, switchtype, etc. to no avail. The McLeod switch tech says that everything looks fine on their end, and they too verify that HDLC on the T is up...

Hello, I'm just starting out with asterisk and I'm playing around with the system. Currently I have a Digium TE210P connected to a PRI on the Asterisk server. I have a SIP soft phone on my laptop for testing that is working fine. When I try to place a call from my soft phone I get this from Asterisk: May 1 09:11:41 NOTICE[20098]: app_dial.c:1029 dial_exec_full: Unable to create

...shows: localhost*CLI> pri show span 5 Primary D-channel: 120 Status: Provisioned, Up, Active Switchtype: National ISDN Type: CPE Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer: 4000 T313 Timer: 4000 N200 Counter: 3 Secondary D-channel: 24 Status: Provisioned, Up, Standby Switchtype: National ISDN Type: CPE Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer: 4000 T313 Timer: 4000 N200 Counter: 3 --- When...

...erisk -r gw*CLI> pri show span 1 Primary D-channel: 16 Status: Provisioned, In Alarm, Down, Active Switchtype: EuroISDN Type: CPE Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer: 4000 T313 Timer: 4000 N200 Counter: 3

...Primary D-channel: 24 Status: Provisioned, Up, Active Switchtype: National ISDN Type: CPE Window Length: 0/7 Sentrej: 0 SolicitFbit: 1 Retrans: 0 Busy: 0 Overlap Dial: 0 Logical Channel Mapping: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer: 4000 T309 Timer: -1 T313 Timer: 4000 N200 Counter: 3 Thanks, Bruce -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100512/a154a9c3/attachment.htm

Hi, I have debian etch 4.0 machine (2.6.18) with two TW-ISDN PCI (Hfc) cards. I use bristuff-0.3.0-PRE-1y-e (asterisk-1.2.17,libpri-1.2.4,zaptel-1.2.16). I also have patched zaphfc with zaphfc_0.4.0-test1_florz-13.diff.gz (I load module: insmod /usr/src/bristuff-0.3.0-PRE-1y-e/zaphfc/zaphfc.ko modes=1 debug=1). So i want to test two cards and make loop between them. So one card would be NT,

...ow span 1" reports: Primary D-channel: 24 Status: Provisioned, Down, Active Switchtype: National ISDN Type: CPE Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer: 4000 T309 Timer: -1 T313 Timer: 4000 N200 Counter: 3 (a) What is causing this? (b) How can it be fixed? (c) Why does Asterisk not recover automatically to what appears to be an intermittent problem? -- George Pajari (dCAP), netVOICE communications 604 484 VOIP(8647) x102 www.netvoice.ca www.ip-centrex.ca www.ip-pbx.ca www.vpas.c...

...0 0 *CLI> pri show span 1 Primary D-channel: 24 Status: Provisioned, Down, Active Switchtype: Lucent 5E Type: Network Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer: 4000 T313 Timer: 4000 N200 Counter: 3 Current zaptel modules loaded: ztd_eth 6660 0 ztdynamic 10452 1 ztd_eth wct4xxp 104000 24 zaptel 223236 54 ztdynamic,wct4xxp ---- On the secondary machine /etc/zaptel.conf: dynamic=eth,eth1/00:30:48:76:27:5D,24,1 bchan=1-23...

...cable connected): pri show span 2 Primary D-channel: 40 Status: Provisioned, In Alarm, Down, Active Switchtype: EuroISDN Type: CPE Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer: 4000 T313 Timer: 4000 N200 Counter: 3 *CLI> pri show span 3 Primary D-channel: 71 Status: Provisioned, Down, Active Switchtype: EuroISDN Type: CPE Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer: 4000 T313 Timer: 4000 N200 Cou...

...cutter do recognize my Windows XP driver files, but generate output in a newer format that is not compatible with the bcm43xx driver. I've been searching and fighting this for quite some time. I have a Fedora 10 installation that runs the wireless just fine on that laptop (Lenovo 3000 N200), but I really hate the churn and instability of Fedora. I was hoping that CentOS 5.3 might include a backported b43 driver, but I grabbed a preliminary version of the new kernel (2.6.18-132), and it still has the old bcm43xx.ko driver. -- Bob Nichols "NOSPAM" is really part of my...

...====== asterisk*CLI> pri show span 1 Primary D-channel: 3 Status: Provisioned, Down, Active Switchtype: EuroISDN Type: CPE (PtMP) Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer: 4000 T313 Timer: 4000 N200 Counter: 3 asterisk*CLI> asterisk*CLI> pri show span 1 Primary D-channel: 3 Status: Provisioned, Down, Active Switchtype: EuroISDN Type: CPE (PtMP) Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer:...

We've been trying unsuccessfully to connect our Meridian Option 81C to a TE110P via PRI. We've followed the directions in asterisk-meridian-a1.pdf (link on http://www.voip-info.org/wiki/view/Asterisk+legacy+integration), but it doesn't seem to work on our 81C (even though many, many users report it works very well on Option 11's). Has anyone had any success in getting the above