Displaying 20 results from an estimated 26 matches for "mxtelecom".
2003 Sep 09
1
Dynamic SIP outbound usernames?
...nf with a
dynamic username of ${DNID}.
How does one achieve this?
Likewise, it would be nice to be able to use gnophone to simulate calls
into the system, by pointing it at the * box and getting the dialed
number on that to route things in the same way.
Any ideas?
--
Alastair Maw <al.maw@mxtelecom.com>
MX Telecom - Systems Analyst
http://www.mxtelecom.com
2003 Sep 11
1
how to make sip uri work
Lets say I have an * at my business, with 7960 SIP phones. All the sip
phones are registered using their extension number (like 305), but I would
also like to put my SIP URI on my business card and in a name format, not an
extension number (like lee.goodman), so that the SIP URI would read
lee.goodman@asterisk.company.com.
How would I set this up in extensions.conf?
I got
2003 Sep 12
3
E400P woes
...the timing field makes
no discernable difference.
The guy who tested the lines isn't very clueful - he just plugs in his
gear and puts a tick in the box, but he's pretty sure it uses hdb3
coding. CAS framing makes the LED go RED.
Anyone give me a clue here?
--
Alastair Maw <al.maw@mxtelecom.com>
MX Telecom - Systems Analyst
http://www.mxtelecom.com
2003 Sep 08
2
live monitoring
Hello,
I've search through all of the lists and cannot find any descriptions of
live monitoring (monitoring a phone call going on between an extension and a
zaptel channel live from another extension while the monitoring phone is
muted). I am aware of the monitor function which is actually a call
recorder, but I'm looking for live monitoring from a muted extension. is
this easily
2003 Oct 14
1
outbound caller ID problem on PRI
...TON: Unknown Number Type (0)
> NPI: Unknown Number Plan (0)
> Presentation: Unknown (67) '' ]
I'm dialing in from SIP outbound to Zap with a context like this:
exten => _X.,1,SetCallerID("mxtelecom" <0845123456>)
exten => _X.,2,Dial(Zap/1/${EXTEN})
Although:
exten => _X.,1,SetCallerID(0845123456|a)
exten => _X.,2,Dial(Zap/1/${EXTEN})
Equally doesn't work.
I've tried setting these in zapata.conf:
callerid="foo" <0845123456>
hidecall...
2003 Aug 13
3
h extension seems to wipe variables?
...a normal one instead.
Does anyone have any idea how I might fix or work around this? It's
important for us to log call durations (and other things), which
obviously needs to be done when the users hangs up. Storing stuff using
the cdr isn't really an option.
--
Alastair Maw <al.maw@mxtelecom.com>
MX Telecom - Systems Analyst
http://www.mxtelecom.com
2003 Aug 13
2
reload
Hello All,
I wonder is there a way where I reload asterisk on CLI without disconnect any call that is currently taken place.
Foong
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030813/41f0a4ca/attachment.htm
2003 Aug 13
1
How do i configure so an incoming call triggers an http request?
Hi all,
I'm about to start setting up my first asterisk/cti system in our test lab.
I've read through all the documentation I can find and relevant posts in the
list archives but can't seem to find anything explaining how to go about
initiating an http request upon an incoming call.
I basically want asterisk to request an uri on our intranet, which will pass
call details to our
2003 Aug 17
1
Java SIP Client
Does anyone know of a Java based SIP client and if so have has anyone
used it.
I found JAIN at https://sip-communicator.dev.java.net/ but have not
tried it yet.
Rgds,
Stuart
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030818/ea1e2717/attachment.htm
2003 Aug 30
3
Conference without zaptel??
Hi,
Just need to check somthing..
Am I correct in saying that conferencing does not work on a system that does not have a Digium board installed??
Thanks..
--
______________________________________________
http://www.linuxmail.org/
Now with e-mail forwarding for only US$5.95/yr
Powered by Outblaze
2003 Sep 16
3
Dialogic Hardware (Take 2)
Please rest assure that I have been following the * development for a
while and understand the value the Digium hardware gives me vs any other
vendor. Most of the people on this list probably know whats good for
everyone else, but I like to find out for myself (I am not a CNN junky).
Now the * site mentions Dialogic as supported hardware at:
http://www.asterisk.org/index.php?menu=hardware
It
2003 Oct 13
2
e100p in norway?
hi
see below's conversation. it seems the e100p card doesn't work with BT.
Any idea how this'll work against Telenor (norway)?
roy
<RoyK> does anyone know if I can trust the E100P to do full PRI stuff in
.no?
<cypromis> dunno about no
<cypromis> I cannot use it in UK
<cypromis> cause the framer has problems with system-x switches at bt
2003 Sep 04
2
Help configuring E400P cards
Hi everybody.
We have a problem with the configuration of the card, the cards work and we receive incoming calls but asterisk don't receive dnid. We have 5 servers with 1 E400P with the same problem and the telco told us that we need to configure the card to request it, how we can do this?
Can you help me to solve the problem.
Best regards,
Carlos Fernández Puente
carlos.fernandez@alisys.net
2003 Sep 17
2
using pci modem cards as fxs/fxo ports in *
Hi all,
forgive the question but is it possible to use PCI modem cards (aka
winmodem's) as FXO/FXS ports in * ?
what about external modems like the USR Sportsters?
Thanks in advance,
Bryan.
Bryan Nolen
Lead Developer
http://Arc.Net.AU
http://cdonline.com.au
2007 Sep 12
1
TE405P intermittent yellow alarm
...it indicates that that the other end of the E1 is
in an alarm condition: however BT's terminating unit seems quite happy
with no alarm conditions at all.
So, really hoping that someone can shed some light on what this might
all mean.
Cheers,
Richard
--
Richard van der Hoff <richardv at mxtelecom.com>
Project Manager
Tel: +44 (0) 845 666 7778
http://www.mxtelecom.com
2003 Sep 04
3
Call script after hangup
Beginner: How can a script be called after a calling user hangup?
What's wrong with this:
[incoming]
exten => s,1,Playback,welcome
exten => s,2,Record,msgfile:gsm
exten => h,1,Goto(callscript,1,1)
[callscript]
exten => 1,1,Wait,5
exten => 1,2,System("SomeScript")
Thank you
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
2003 Sep 24
1
CPU Optimisations For asterisk
How would I compile asterisk for the Athlon XP arch, would there be any
advantage doing this?
Thanks for your Help
Robb
2003 Nov 18
3
Ethereal plugin for IAX2
...e e-mailed me to say that they're in a hurry for
such things. If you'd like me to e-mail you a copy, give me a shout.
Otherwise, I'll polish it up and give it to the Ethereal guys for
inclusion in Ethereal 0.9.17 or something. :)
Regards,
--
Alastair Maw
Systems Analyst
http://www.mxtelecom.com
2003 Nov 03
2
IAX2 Java library (was Re: New IAX software phone (for WIndows platform))
...neous calls required in a server
environment, although there'll be no reason not to use it for IAX
clients too.
Obviously such a library would enable a nice GUI cross-platform IAX(2?)
client to be easily created, which would be a nice by-product.
--
Alastair Maw
MX Telecom
http://www.mxtelecom.com
2003 Sep 25
3
configuring TE410P for four E1 PRI lines
hi,
I'm trying to configure my newly acquired TE410P card to work as 4
E1 spans. This is
supposed to be a drop-in replacement to the earlier E100P card. However,
on loading the
zaptel module it gets configured as T1 spans basically doing a 'cat' on
/proc/zaptel/1 thru 4,
it shows 24 channels per span. After this ztcfg fails saying
'ZT_CHANCONFIG failed for channel 97'.