search for: mrouting

Hi, I have problem with multicast routing on my network. I tried mrouted and also pimd, but always same problem. When I set mrouted or pimd on one router, everything works fine, but when I start mrouted/pimd on another one, routing die. In moment when I start anorher mrouted/pimd /proc/net/ip_mr_cache is cleaned. My topology: gateway (no mrouted/pimd)

Hello I am running smcroute(version 0.9) on Linux 2.2.16-22 and I have configured two multicast (S,G) addresses to forward. The forwarding is working. I get the following message several times per minute. mroute: pending queue full, dropping entries The kernel has the following options CONFIG_IP_MULTICAST=y #CONFIG_IP_ROUTER=n # is this required??? CONFIG_IP_MROUTE=y CONFIG_NET_IPIP=m

I am trying to set up my Shorewall box to forward multicast packets to my local net. I do have some problems with mrouted (see below), but I can join and add routes using smcroute. Multicast works when shorewall is disabled. I got a lot of help from the following. http://lists.shorewall.net/pipermail/shorewall-users/2005-January/016674.html I cannot get the multicast packets to pass the fw when

Hi When I start shorewall, the multicast stream is stopped. My config: Windows VLC Client-----eth0:192.168.254.1/24--fw---eth1:191.168.254.254/16-------------------------Linux VLC Streaming server 192.168.254/24 lan wan (but it''s really a internal lan !) 191.168.1.21/16 on the FW/shorewall route add -net 224.0.0.0 netmask

I wouldn't expect you to be using RFC3389 if your using A-law, can you include your IOS version and IOS config file ... I have not specified any allow's or disallow's in my * config for the codecs with my 5300, I also use Cisco 79xx phones and I use the option within the phones config file to select the preffered codec and when I change this to G.729/A-law/U-law all works perfectly

well, once i figured out what to do it was easy. 1) install freebsd over linux. 2) recompile kernel with: option MROUTING 3) start mrouted 4) go get yourself a cold beer. you deserve it! thanks! -bob CONFIDENTIALITY NOTICE: The information in this electronic mail transmission contains confidential information intended only for the use of the individual or entity named above. If the reader of this message is n...

Hello, everyone. Right now, we are trying launch our own PBX system based on Asterisk(Fedora) with Cisco 2611. Cisco has 2 port FXO card installed on it. For testing, I have 2611 hooked into phone line with number of xxx-xxx-xxxx fine. (I'll call it F). Using softphone, I can dial in extension 1001 on asterisk, which should talk to cisco. After initial connection to Asterisk, I have try to

Fix one serious bug (in libnetlink), and a couple of other minor patches. http://developer.osdl.org/dev/iproute2/download/iproute2-051007.tar.gz Stephen Hemminger Reenable ip mroute Mike Frysinger Handle pfifo_fast that has no qopt without segfaulting Mads Martin Joergensen Trivial netem ccopts Jerome Borsboom Fix regression in ip addr (libnetlink) handling -- Stephen Hemminger

Hi, I am getting the errors given below, when I am trying to add the prio to any table. What can be the problem and how can i resolve it.... Kindly help [root /root]# ip rule RTNETLINK answers: Invalid argument Dump terminated [root /root]# ip rule list RTNETLINK answers: Invalid argument Dump terminated [root /root]# ip rule list table main "ip rule show" need not eny arguments.

I need to send multicast traffic through a GRE tunnel between two Linux routers. The tunnel works for normal IP packets, but I can''t see how to make it work for multicast. Here''s the setup: 10.10.10.0/24 LAN-B--------------RtrB-------------RtrC--------------LAN-C 192.168.2.0/24 192.168.1.0/24 RtrB interfaces: eth0

Hi, I had previously posted about connecting an AS5300 to * via SIP/H323. I got it to work via SIP, but only 1 call at a time would work, and if a user from the * side hung up, the cisco would'nt catch the hangup. I an now trying to hook up to the cisco via E1, with a Sangoma A101 card in my * box. I would like it such that I call from * via E1/PRI to the cisco, and call out via R2 to

The BBC are currently trialling multicasting the Olympics. This requires multicast and IGMP to be available. As far as I can make out, in 2.0.8 at least, all multicast addresses are filtered out and, to my naive eyes, can''t be re-enabled. Please prove me wrong :-) Dirk -- Please Note: Some Quantum Physics Theories Suggest That When the Consumer Is Not Directly Observing This Message,

If you have a PRI terminated in a Cisco router talking SIP to * and would be willing to share your Cisco config, please respond. Also, I would be interested in knowing what version of IOS you are using. We are using an NM-HDV in a 3640. TIA Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775) 236-5815

I have a standard 3 interface shorewall setup and I want to receive multicast stuff from ''net'' -> ''loc''. This requires me, first, to do an IGMP join which involves 192.168.1.x -> 224.0.0.x being NATed out as the ''net'' interface''s IP address. Obviously replies have to be NATed back to ''loc'' addresses. Can

I'm experimenting (using for the first time) with using a cisco3620 to connect to the PSTN via a channelised E1 interface, with * handling all of the SIP calls. If anyone has any installation tips / help / documentation I would be most appreciative :) However, my first question is this: when I am in the setup, I see the following: Current interface summary Controller Timeslots

Hello list, Not sure if I am asking the question in the correct list. I am a newbie trying to get multicast routing to work on my linux 2.4 kernel. I am using usc pimd code. I have pimd which sets up the route in the kernel [ /tmp]# ip mroute show (22.22.22.1, 224.0.1.20) Iif: eth2 Oifs: eth1 [ /tmp]# I can see data packets arriving on eth2 [/tmp]# tethereal -i eth2 Capturing

Hi, I have been reading: http://lartc.org/howto/lartc.multicast.html in effort to understand how to route multicast traffic and just joined the group. History: I am trying to multicast mpeg (using the videolan server) on a private network. The server side of the network is copper gigabit, which connects to one of those cheap fast Ethernet switches with a single gigabit uplink. The problem

Hi All, As it is written in the "Linux 2.4 Advanced Routing HOWTO" GRE tunneling has some benefits compare to IP-in-IP, on of it benefits is the ability to transport multicast traffic through a GRE tunnel. I used the mrouted daemon and I know that the daemon supports tunneling but I don''t want to use its tunneling method. Assuming I have gre0 as my tunneling device I did the

Hi. I want to drop silently locally generated packets on a specific interface. I tried 2 approaches: tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1: htb tc filter add dev eth0 parent 1: proto ip u32 match ip dst 10.10.10.1 flowid 1:1 police conform-exceed drop/drop tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1: prio bands 2 priomap 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

Hi all, We want linux (ubuntu) with 2.6 kernel to act as multicast router and to pass multicast packets between different subnets. And linux machine as router has two network cards having two different subnets assigned onto. We first worked "sysctl -w net.ipv4.ip_forward=1" line on linux shell that made linux to work as unicast router. (like host, the multicast packets were discarded at