search for: ml350

We bought a Compaq ML350 G5. When trying to install Centos, I got the message: No disk installed. and centos suggest me a list of drivers, but none of them seems to work. Has anybody tried this? Any help would be appreciated. carlos -------------- next part -------------- An HTML attachment was scrubbed... URL: <ht...

Hi list! I tried to install Xen 4 in a HP Proliant ML350 G4p, but it seems not compatible, is there another way to run Xen 4 in this server ? I couldn''t find any information on Hp''s site neither Intel''s site ... Thanks ! -- @ntonio _______________________________________________ Xen-users mailing list Xen-users@lists.xe...

...gt; My PXE configurations works fine for a bios PXE (the server in legacy > mode) but hangs in an EUFI mode. Look like it can transfer the bootx64.efi > but not the next one ldlinux.e64 > > > Any ideas? > > Thanks > Latest updates (including firmware) for the HP ML350 Gen9 were released on 2014DEC19 (v1.21); I would suggest double-checking that you are using the latest (firmware and related tools) version, before starting any other troubleshooting procedures. Have you tested with official upstream binaries already included in the official archives downloade...

On Thu, Mar 5, 2015 at 2:03 PM, Jorge Cisneros via Syslinux <syslinux at zytor.com> wrote: > Hi All, > > My PXE configurations works fine for a bios PXE (the server in legacy > mode) but hangs in an EUFI mode. Look like it can transfer the bootx64.efi > but not the next one ldlinux.e64 > > > Any ideas? My latest personally-published binaries.

Hi, I have been trying to install CentOS 5.1, 5.2,and 5.3 and the HP server but to no success. It starts loading well the on trying to load the cciss driver, the machine hangs there and refuses to move on. Any help will help quite alot. Thanks

Hi All, My PXE configurations works fine for a bios PXE (the server in legacy mode) but hangs in an EUFI mode. Look like it can transfer the bootx64.efi but not the next one ldlinux.e64 Any ideas? Thanks Software> syslinux ver 6.3 atftp 7.1 Log server side >> Booting Embedded LOM 1 Port 1 : HP Ethernet 1Gb 4-port 331i Adapter - NIC (PXE IPv4) >> Booting PXE over

Hello I do have problem using Linux with an external HP tape drive. The server platform is also an HP Server; the server is an HP ML350 G4, and the Tape drive is a HP Storage Works Ultrium 448 - 1U Rack-mountable. HP Ultrium documentation says two drivers should be automatically up, sym53c8xx for LSI SCSI interface "st" for tape and /proc/scsi/scsi should contain information about tape drive, e.g. SCSI ID. However none...

hi guys, after installing centos on my ml350 i found 2 choices on the grub options. CENTOS-4 i386 (2.6.9-22.ELsmp) CENTOS-4 i386-up (2.6.9-22.EL) what choice will i choose ? --------------------------------- Yahoo! Autos. Looking for a sweet ride? Get pricing, reviews, & more on new and used cars. -------------- next part -------...

...tools to install and support DomUs. And now I''m really confused. I need a distribution to run fast and stable Windows Servers. It should be easy to do the daily administration job for an experienced Linux system administrator. The distribution should support the hardware in an HP ProLiant ML350 G5 (Intel Xeon) with Raid 5 and shouldn''t waste hardware performance. Is there a distribution that fulfills these requirements? Thanks Marc _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hello lists, I,ve compaq ML350 with 2 Xeon 2.4 GHZ and FreeBSD 5.0 RELEASE installed and working very fine about 4 mounts. The machine running GENERIC kernel samba and firebird database server with no problems until at begining of this week, in morning machine freezes with no responce iven in conconsole, no responce from network...

...s out there to see if anyone else has seen any issues. May cross-post to asterisk-dev if it's indeed a bug (and not my own stupidity). I've got a Digium TE220 (2xT1 interface w/Echo canceller) that in two separate Nehalem-based (Xeon E5520 "Gainestown") boxes (HP ProLiant ML350 G6; HP Z800 Workstation) has caused numerous kernel panics. This is only when the dahdi service is running with a very simple config (I've defined the first span, the bchans and the dchan, and that's about it). If dahdi is stopped, or the card is removed, everything's fine. I in...

Hi to all, I am in the process of setup a new asterisk server, I think in the HP Proliant ML350 G6 Server (aprox. 100 SIP Users), and Sangoma A102DE Card. The specs of the Proliant (HP PART 487932-001) about PCI are the next. 1 ( 1 ) x PCI Express 2.0 x16 ( x8 mode ) , 1 ( 1 ) x PCI Express 2.0 x8 ( x8 mode ) , 4 ( 3 ) x PCI Express 2.0 x8 ( x4 mode ) The question is...

Hi All, I have recently installed CentOS 6.3 with QEMU+KVM for Virtualization. I have successfully created a Windows 2003 VM with 4GB of RAM. The host server is an HP ML350 G8 with 24GB RAM and 24 cores. Details of one of the cores is shown below: processor : 23 vendor_id : GenuineIntel cpu family : 6 model : 45 model name : Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz stepping : 7 cpu MHz : 1200.000 cache size : 15360...

...my main issue: Can one use a PCI interface card in a PCI-X slot ? If so, under what conditions ? (ex: 3.3v cards only ? PCI-X bus speed is brought down ? what ?) The objective would be to use Digium's echo cancelling PRI and BRI cards and/or beroNet's BRI cards on, for example, a Proliant ML350 G4 or G5 containing PCI-X slots -- would such combination be technically feasible ? If not, where are you guys getting servers for your PCI based solutions ? Can anyone shed some light into my doubts ? Pointers, documentation, experiences ? The second, kind of "attatched" issue, is a...

...ke 2570p and 8470p PXE boot syslinux.efi correctly. Unfortunately this error does not display any error message on 6.0.3. I wonder if this problem with HP EFI firmware affecting current but not the newest hardware it's not somehow related to the recent thread "Problem boot PXE UEFI on HP ML350 Gen9" http://www.syslinux.org/archives/2015-March/023305.html In this case the ldlinux.e64 is requested but never received even when offered by the TFTP server. Best, Patrick

...d over CIFS for windows/mac clients, that is always available, also if the server who host it hang up or burn. I've looked for a lot of solution but i cannot find the right for me. Actually the company has two server, all running debian lenny as linux distro. The first one, a quad core proliant ml350 g5 6tb raid 10, work as primary server. On it i've installed vmware server that runs a win2003 r2 guest for central authentication,domain policing ecc. It has another role : the primary file server, running a samba server integrated with AD. The seconde one, a pentium 4 1,2 tb raid 5, work as...

...ncing: Uncorrected machine check Syslog output (not much before restart): Oct 20 07:11:54 localhost kernel: TE4XXP: Version Synchronization Error! Oct 20 07:14:24 localhost syslogd 1.4.1: restart. ... --- I only see the machine check exception on the two Nehalem boxes (HP ProLiant ML350 G6, Z800 Workstation); on a Core 2 Duo (Dell Optiplex 745) it just hard freezes after the "Version Syncronization Error!" messages. If there's any further details I can provide I'm happy to do so. Would like to figure out what's happening here if anyone can help shed a...

...0 messages and to display a message it takes 6-7 seconds. Before it took only 2-3 seconds to display a message (in Thunderbird). I have tried to turn "fsync_disable" to yes, but the feeling is somewhat the same. What else can I try to tune? It's a FreeBSD 6.2 machine on a HP ProLiant ML350 with 2GB RAM and 120GB SATA disk and the Dovecot running in a FreeBSD jail. You can find my dovecot.conf here: http://pastebin.ca/627442 Thanks, Nejc

...d apic for domUs . It didn''t work Second attempt: /proc/sys/xen/independent_wallclock = 0 ntpd on domUs . It works but as the clocks run too fast after a bunch of days it losts synchronization because the drifts are too big. More infos: dom0 is Centos 5, my server is an hp proliant ml350 G5, , everything works in full virtualisation. Any suggestion? Cheers, Fab. _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Is anyone successfully running asterisk on an HP proliant while using their management software, hpasm? I have two DL360's and two TE220B's. The cards have their own IRQ's. No matter what combination of settings I use, the cards fail the patlooptest if hpasm (ver 7.9.1) is running. If I stop it the cards pass the test. I really want to run the management software, so I'd