search for: misdn_l1

...ules: Loading module chan_capi.so failed! my lsmod shows: Module Size Used by mISDN_capi 85312 0 kernelcapi 45088 1 mISDN_capi hfcpci 28716 0 mISDN_dsp 197248 0 l3udss1 32008 0 mISDN_l2 38272 0 mISDN_l1 10632 0 mISDN_core 77732 6 mISDN_capi,hfcpci,mISDN_dsp,l3udss1,mISDN_l2,mISDN_l1 md5 4352 1 ipv6 235840 24 parport_pc 25024 1 lp 12396 0 parport 42696 2 parport_pc,lp dm_mod...

...rom digium's ftp. Also, running /etc/init.d/misdn-init --scan show me the 2 cards I have, /etc/init.d/misdn-init --config prepare me the misdn.conf and after a /etc/init.d/misdn-init start I see: mISDN_dsp 191656 0 mISDN_capi 88716 0 mISDN_l2 34452 0 mISDN_l1 11036 0 mISDN_core 71360 6 mISDN_dsp,hfcmulti,mISDN_capi,l3udss1,mISDN_l2,mISDN_l1 kernelcapi 44576 2 mISDN_capi,capi My questions: why Asterisk doesn't want to let me activate the misdn channel? Is misdn ready for 1.4? Thanks for any hint -- Danie...

...b1dma 17412 1 b1pci b1 25856 2 b1pci,b1dma capi 19392 0 kernelcapi 49664 4 b1pci,b1dma,b1,capi capifs 7176 2 capi ipv6 271136 12 lp 12964 0 mISDN_l2 44288 0 mISDN_l1 13192 0 avmfritz 25740 0 mISDN_isac 17280 1 avmfritz mISDN_core 75648 4 mISDN_l2,mISDN_l1,avmfritz,mISDN_isac* But when I execute command cappinfo, I get : *root@asterisk:~# capiinfo capi not installed - No such device or address (6). * -----...

...type lsmod I've got the following output: Module Size Used by zaptel 178308 0 avmfritz 21388 0 mISDN_isac 14336 1 avmfritz mISDN_dsp 191424 0 l3udss1 34184 0 mISDN_l2 39040 0 mISDN_l1 11016 0 mISDN_core 67168 6 avmfritz,mISDN_isac,mISDN_dsp,l3udss1,mISDN_l2,mISDN_l1 edd 9240 0 joydev 10304 0 sg 35488 0 st 39196 0 sr_mod 16292 0 ide_cd...

...e(s): >> avmfritz If I try to start the daemon, I can read: # service mISDN start -- Loading mISDN modules -- >> /sbin/modprobe --ignore-install capi >> /sbin/modprobe --ignore-install mISDN_core debug=0 FATAL: Module mISDN_core not found. >> /sbin/modprobe --ignore-install mISDN_l1 debug=0 FATAL: Module mISDN_l1 not found. >> /sbin/modprobe --ignore-install mISDN_l2 debug=0 FATAL: Module mISDN_l2 not found. >> /sbin/modprobe --ignore-install l3udss1 debug=0 FATAL: Module l3udss1 not found. >> /sbin/modprobe --ignore-install mISDN_capi FATAL: Module mISDN_cap...

...e=immediate isdnmode=ptp msn=* incomingmsn=* controller=1 softdtmf=1 context=dispatcher accountcode= devices=2 Here is my /etc/modprobe.d/capi conf file: alias /dev/capi20 avmfritz alias char-major-68-0 avmfritz install avmfritz /sbin/modprobe capi; \ /sbin/modprobe mISDN_core; \ /sbin/modprobe mISDN_l1; \ /sbin/modprobe mISDN_l2; \ /sbin/modprobe l3udss1; \ /sbin/modprobe mISDN_capi; \ /sbin/modprobe mISDN_x25dte; \ /sbin/modprobe --ignore-install avmfritz protocol=0x22 remove avmfritz /sbin/modprobe -r --ignore-remove avmfritz; \ /sbin/modprobe -r mISDN_x25dte; \ /sbin/modprobe -r mISDN_capi; \...

...to use hardware which is supported by the new ) Bidx 0 --> Child 10000101 Bidx 1 --> Child 10000201 No Upper ID my lsmod: Module Size Used by hfcpci 28716 0 mISDN_dsp 197248 0 l3udss1 32008 0 mISDN_l2 38272 0 mISDN_l1 10632 0 mISDN_core 77732 5 hfcpci,mISDN_dsp,l3udss1,mISDN_l2,mISDN_l1 md5 4352 1 ipv6 235840 26 parport_pc 25024 1 lp 12396 0 parport 42696 2 parport_pc,lp dm_mod 554...

...-> Interface is Poin-To-Point. -> Protocol: DSS1 (Euro ISDN) -> childcnt: 2 -------- mISDN_close: fid(3) isize(131072) inbuf(0x804c060) irp(0x804c060) iend(0x804c060) # lsmod | grep -i isdn mISDN_dsp 184456 0 mISDN_capi 75436 0 mISDN_l2 28628 0 mISDN_l1 8444 0 kernelcapi 27616 2 mISDN_capi,capi mISDN_core 55424 6 mISDN_dsp,hfcmulti,mISDN_capi,l3udss1,mISDN_l2,mISDN_l1 I installed asterisk-chan_misdn from http://www.beronet.com/ and at some point I got the chan_misdn.so module loading and I could use the B...

...2.6.11.11 + mISDN-CVS-2005-05-01 + Asterisk 1.0.7 + Zaptel 1.0.7 chan_misdn build from chan_misdn-beta-0.0.3-rc6 and against mISDNuser-CVS-2004-08-29. The /dev/mISDN node was also created. I'm loading the kernel modules this way: modprobe zaptel modprobe ztdummy modprobe mISDN_core modprobe mISDN_l1 modprobe mISDN_l2 modprobe l3udss1 modprobe mISDN_dsp modprobe w6692pci protocol=2 layermask=1 Then I start asterisk: asterisk -c -vvvvvv -dddddd When loading chan_misdn.so , Asterisk complains and exits after the last error line below " [chan_misdn.so] => (Channel driver for mISDN Suppor...

Your Zap conf files would be helpful. Zttest results? Cat /proc/interrupts. Sharing interrupts? Any funky error in the logs? Thanks, Steve Totaro http://www.asteriskhelpdesk.com > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users- > bounces@lists.digium.com] On Behalf Of Administrator TOOTAI > Sent: Thursday, May 10, 2007 6:24 AM

Hi. I'm having problems with chan_mISDN configuration. Line "echotraining=yes" causes warning, when Asterisk is parsing misdn.conf and I'm confused why the PBX doesn't accept the setting. No matter which section I try to offer it, it is always invalid or out of range. The setting itself is supposed to be valid, it is in the sample configuration file of chan_mISDN 0.3.1.

...Subsystem: Broadcom Unknown device 0230 Flags: bus master, medium devsel, latency 0 # lsmod Module Size Used by mISDN_dsp 183464 0 hfcmulti 61548 0 mISDN_capi 75436 0 l3udss1 29788 0 mISDN_l2 28628 0 mISDN_l1 8444 0 mISDN_core 55424 6 mISDN_dsp,hfcmulti,mISDN_capi,l3udss1,mISDN_l2,mISDN_l1 wcte12xp 30016 0 xpp 43560 0 wctdm 25728 0 zaptel 171940 3 wcte12xp,xpp,wctdm firmware_class 6272 0 parport_p...

...= 0 Locking Config Mutex UnLocking Config Mutex Init. Stack on port:1 unknown port(1) type 0x00000000 No lower Id port:1 init_stack: Success aster1:/etc/asterisk # But the above message "init_stack: Success" is not true. The mISDN stuff is loaded as follows: modprobe mISDN_core modprobe mISDN_l1 debug=0 modprobe mISDN_l2 debug=0 modprobe l3udss1 modprobe mISDN_dsp debug=0 options=0x0 modprobe avmfritz layermask=0xf protocol=0x22 The relevant misdn.conf show: ; chan_misdn sample config ; general section: ; [general] ; define your default context here context=misdn ; default language lang...

...s: ----------------------------------------- modprobe --ignore-install hfcmulti type= protocol=,,, layermask=0x3,0x3,0x3,0x3 poll=128 debug=0xf De output of the lsmod | grep hfcmulti command is hfcmulti 74984 0 mISDN_core 85248 6 mISDN_dsp,mISDN_capi,l3udss1,mISDN_l2,mISDN_l1,hfcmulti The output of dmesg | grep Digium is [42949387.380000] HFC-MULTI: Card 'HFC-4S Digium Card' found, but not given by module's options, ignoring... I recompile Asterisk and install it again, but I do not get the misdn command in asterisk. What am I missing ? Thnx.

HI: Is there any way to raise up sound volume on fxo on TDM04B without changing tx-gain and rx-gain ? __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

...sempron running Kernel version 2.6.15.4 - mISDN mqueue from 2006-02-17 - Billion HFC card using hfcpci snippet from /etc/modprobe.d/capi: ---> alias /dev/capi20 hfcpci alias char-major-68-0 hfcpci install hfcpci /sbin/modprobe capi debug=1; \ /sbin/modprobe mISDN_core debug=1; \ /sbin/modprobe mISDN_l1 debug=1; \ /sbin/modprobe mISDN_l2 debug=1; \ /sbin/modprobe l3udss1 debug=1; \ /sbin/modprobe mISDN_capi debug=1; \ /sbin/modprobe mISDN_x25dte debug=0; \ /sbin/modprobe mISDN_dsp; \ /sbin/modprobe mISDN_dtmf; \ /sbin/modprobe --ignore-install hfcpci protocol=0x22 debug=1 <--- I'm attachi...

Hello I have just set up Asterisk Asterisk 1.4.21.2 on a CentOS 5.2 machine. I am using the OpenVox B200P ISDN card. My problem is that even though chan_misdn module seems to be loaded correctly with Asterisk (I can see it using 'module show' command) the misdn commands are not available to me in the CLI so I cannot tell if my box is correctly interfacing with the ISDN card Any ideas

...ttt=180 fi #INSMOD_PARA=-m MEXT=.ko cd /usr/src/linux/drivers/isdn/hardware/mISDN #modprobe capidrv modprobe capi insmod ${INSMOD_PARA} mISDN_core${MEXT} debug=${DEBUG} >/tmp/m_core.mod # insmod ${INSMOD_PARA} faxl3${MEXT} debug=${DEBUG_F} ttt=$ttt > /tmp/m_faxl3.mod insmod ${INSMOD_PARA} mISDN_l1${MEXT} debug=${DEBUG} >/tmp/m_l1.mod insmod ${INSMOD_PARA} mISDN_l2${MEXT} debug=${DEBUG} >/tmp/m_l2.mod insmod ${INSMOD_PARA} l3udss1${MEXT} debug=${DEBUG} >/tmp/m_l3u.mod insmod ${INSMOD_PARA} mISDN_capi${MEXT} debug=${DEBUG} >/tmp/m_capi.mod # insmod ${INSMOD_PARA} mISDN_isac${MEXT}...