search for: mediaproxi

Hi, I've sucessfully completed an Openser 1.3.2 + Mediaproxy 1.9.1 + Asterisk 1.4 + CDRTool with freeradius telephony system. Asterisk is used only for voice mail and redirectioning calls. Every calls should pass through mediaproxy so that i can account them. The goal was to create a simple prototype of what could be a VoIP provider. Now i need to dimensioning this system to work

Hello Masters Here i going explain what Iam doing and where i need help .. Iam running Sip Express Router ,Asterisk, on same box (for testing) my Sip express router is working fine and i can accept global register requests with valid account and in front of Sip express router (SER) Iam using Mediaproxy-1.4.2 which is handler to rtp/rtcp streams between nated clients

You will also need your SIP clients that are behind the same NAT to support ICE (Interactive Connectivty Establishment) if you want calls between them. Xten Eyebeam and Snom phones are the only ones I'm aware of that support it. On 7/5/05, Ricardo Martinez <rmartinez@redvoiss.net> wrote: > And even worst. > There are some kind of NAT that STUN does not work. > You can check

Trying to find a solution to a sticky problem here. We have 3 OpenSER systems. Phones register with the OpenSER systems, and after they authenticate the user, pass the registration info using OpenSER's send() command to all Asterisk boxes sitting behind them. Each asterisk system then knows about every phone. For this to work, I had to turn off authentication in Asterisk for both

Hi all, I have been using asterisk to do such kind of thing, But I must admitt, this is not 100 % conveniant (Mainly because Asterisk isn't a SIP Proxy). I just wanted to know if you knew/used some kind of SBC or packages which would deal both with SIP AND RTP ! SER/OpenSER woulc be a good SIP Proxy ... but then how to deal with RTP ? Any tip, info greatly welcome ! Thanks, JM

Alex thank you for your response. In this case we are USING INBAND, though I have tried both. Nothing works. Yes ser is configured with mediaproxy. Thank you, -JK JK, In-band or RFC2833 DTMF signaling? Also, unless you have SER configured with a media proxy, the actual "call" is not running through SER. It's a signaling proxy only. -- Alex Balashov Evariste Systems Web :

Hello i am trying to use this exmple with SER-0.9.3 but still NATED Clients are not working any other requirement http://www.voip-info.org/tiki-index.php?page=SER+example+NAThelper ----------------------------------------------------------- # $Id: ser.cfg,v 1.21 2003/06/04 13:47:36 jiri Exp $ # # simple quick-start config script # # ----------- global configuration parameters

hello to all, I advice you to not use CDRtool from ag-projects : Fisrt ag-projects talk about is product like a gpl software however they don't provide at least some documentation for non commercial users . try to call them !! i'll offer you some money . You can not Call them for some advices ... It's really a bad product don't waste your time to setup it. this enterprise must

Dear all, First off, I am very new to asterisk so forgive me if any of my comments or questions seem trivial. Thanks to [this post](http://blog.polybeacon.com/2010/10/17/asterisk-1-8-and-google-voice/) and [this post](http://www.davidvossel.com/?p=28), I have GV set up on asterisk through jabber.conf and gtalk.conf. I can successfully dial out from asterisk. I'm trying to set up an

Hi, I know the following is mostly the issue of SER and I already posted the same content to SER User list. Just for more input, I posted it to this list. Sorry for the cross post for some people. I've set up SER for UA to UA call. I'm thinking of setting up SER to relay to Asterisk PBX to use conference call and voicemail of Asterisk. I will employ this system for client connection

Hi asterisk list, this is a bit off topic, but can anyone explain the point of the commercial far-end solutions floating around (jasomi, for example)? or are the far-end things just hyped up media proxies? They claim to be b2bua devices but that's a very wide category and only implies that the media stream passes through it - exactly what can be done with fairly simple OSS stuff. In short,

Hi, We're deploying a small VoIP solution for a group of teleworkers. Naturally, this exposes us to all sorts of fun, most of which we seem to have working properly. However, some NAT issues are still bugging us and we have noticed that often these situations didn't exist when users were connected directly to our VoIP provider, voiptalk.org. They have something which they call a

Skipped content of type multipart/alternative-------------- next part -------------- _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users

Hi all, Is there a solution to solve this ? ASTERISK 1.2.4 || Internet===SER/OPENSER=====Nat==[private net] || sip agents rtpproxy/mediaproxy Sip agents use SER/OPENSER as an outbound sip proxy and asterisk as a registar server, pbx functions, ... SER/OPENSER look for domains in URI. if domains are handled by SER/OPENSER

Hi All, i am stuck in NAT issue on ec2 cloud computing from last 2-3 days , may be some of you are doing setup and integration on cloud. below is my setup details which may help you to suggest me solution. Asterisk version : 1.6.2.6 1) Kamailio server having public_ip as well local ip .i am using mediaproxy [also tried rtpproxy] . 2) Asterisk server having public_ip as well local ip. setup:

Hi Guys, Soon, I'll be starting a new section related to Asterisk (around 4 years of full time experience with Asterisk, Trixbox, SER, OpenSer, MediaProxy, AGI*) so let me know if you like to see some topic coming. Cheers Arun -------------- next part -------------- An HTML attachment was scrubbed... URL:

I'm chasing down some DTMF interop issues would like to hopefully rule out Asterisk in the following configuration: RTP path is: Linux/PC/Mac SIP clients -> [MediaProxy as needed] -> Asterisk 1.8.7 -> SIP termination provider(s) DTMF is strictly RFC2833 with no in-band. Asterisk stays in the media path for application reasons and is "Locally bridging SIP/foo and SIP/bar"

Hello, I have several * servers behind a SER server (in a local ip range). The SER server is also publicy reachable. On the other site, I have SIP clients that are behind another NAT or in the same NAT range as the * server. Can someone give me some directions/hints etc. on how to make this work. I think I should be using MediaProxy with SER. But do the SIP clients need to register at the SER

Hi all, Hope somebody can help-I really am stumped as to why this won't work. I realise that this isnt an Asterisk problem (Please dont bash me on the list) and I have emailed the SER list but I havent received a reply and maybe someone on this list can help...Once this problem is solved I am going to use Asterisk for voicemail etc with SER (I have it set up) I currently have SER set up and

Greetings list i'm trying to connect with a VoIP provider for termination.. and they have offered us three servers to connect with one SIP Signaling server and Two Media servers .. googled for a week and didn't find a way to do this.. so my question. is it possible to be done? Asterisk server 1.4.26.3 _________________________________________________________________ The