search for: mdcx

...DEBUG" ++++++++++++++++++++++++++++++++++++++++ v=0 o=root 2272 2272 IN IP4 192.168.1.30 s=session c=IN IP4 192.168.1.30 t=0 0 m=audio 26040 RTP/AVP 0 a=rtpmap:0 PCMU/8000 to 192.168.1.31:2427 -- Modified aaln/2@atagw-1 with new mode: recvonly on callid: 770afbb9257130a3 Posting Request: MDCX 44 aaln/2@atagw MGCP 1.0 C: 770afbb9257130a3 M: recvonly X: 257130a3 I: 3 R: L/hu(N),L/hf(N),D/[0-9#*](N) to 192.168.1.31:2427 -- MGCP Asked to indicate tone: L/wt,L/ci(10/04/21/07,110,SoftPhone) on aaln/2@atagw-0 in cxmode: recvonly Posting Request: RQNT 45 aaln/2@atagw MGCP 1.0 X: 3f2dba31 R...

...aaln/1@10.0.1.19 MGCP 1.0 X: 2149c6df R: hu(N), hf(N), D/[0-9#*](N) to 10.0.1.19:2427 -- Executing Playback("MGCP/aaln/1@10.0.1.19-1", "demo-echotest") in new stack -- Modified aaln/1@10.0.1.19-1 with new mode: sendrecv on callid: 7d4b8e932149c6df Posting Request: MDCX 309 aaln/1@10.0.1.19 MGCP 1.0 C: 7d4b8e932149c6df What is the -1 'UNKNOWN' condition on channel ? Is it correct mgcp packet ? -- Pavel Zheltouhov, Comlink ISP, Voronezh, Russia phone/fax +7(0732) 727172, http://www.comlink.ru

...39;s are pure fantasy for easier reading): * -> MGCP CRCX (session 1, port 3001, destination *) * -> 5300 INVITE (session 1, port 3002, destination *) 5300 -> * OK (session 2, port 4001, destination 5300) (ring and answer, * tries to bridge the call legs) * -> MGCP MDCX (session 1, port 4001, destination 5300) * -> 5300 INVITE (session 1, port 3001, destination MGCP) 5300 -> * OK (session 3, port 5001, destination 5300) at this point cisco expects RTP stream to port 5001 but it goes to 4001 and gets lost. Stream from 5300 to MGCP box goes O...

Hi, I tried to establish NCS call b/w 2 endpoints of same PacketCable MTA using asterisk-10.0.0. I observed that MDCX sent to aaln/1 contains its own SDP. Some I observed with aaln/2. So voice path is not established b/w aaln/1 and aaln/2. My Configurations: mgcp.cong: [mta84.globaledgesoft.com] host = mta84.globaledgesoft.com wcardep = aaln/* callwaiting = 1 ;canreinvite = 1 dtmfmode = rfc2833 ;amaf...

...ipide_9 MGCP 1.0 X: 6038038f R: L/hu(N),L/hf(N),D/[0-9#*](N) to 10.1.1.101:2427 -- Swapping 0 for 1 on aaln/3@Monforte_Euripide_9 -- MGCP Muting 0 on aaln/3@Monforte_Euripide_9 -- Modified aaln/3@Monforte_Euripide_9-0 with new mode: inactive on callid: 05eb2f883bbde177 Posting Request: MDCX 735 aaln/3@Monforte_Euripide_9 MGCP 1.0 C: 05eb2f883bbde177 M: inactive X: 3bbde177 I: 37 R: L/hu(N),L/hf(N),D/[0-9#*](N) to 10.1.1.101:2427 -- Started music on hold, class 'default', on channel 'SIP/024390239-7517' -- Creating connection for aaln/3@Monforte_Euripide_9-1 in...

We are using an MGCP configuration. There seems to be some incompatibilities between our Netergy T2 VOIP chip and Asterisk. This is how our Vendor sees it: Here's what I see. 1. The first call is initiated. (CRCX) The interesting thing here is that the CA (Call Agent) tells us to go directly into sendrecv mode which means that we start streaming audio immediately. All other CAs that

Hi. I'm new in Asterisk with MGCP. I set up a MGCP user agent and start asterisk with the next configuration files. '--------------- extensions.conf ---------------------------------------------------- [general] static=yes writeprotect=yes [globals] ap1 => mgcp/aaln/ap200@64.76.148.186 [macro-apl1] exten => s,1,Dial(${ARG1},30,Ttmr) ;exten => s,2,Voicemail(u${MACRO_EXTEN})