Vikas Bansal
2011-Oct-21 13:40 UTC
[asterisk-users] No Voice path during NCS call with Asterisk 10.0.0
Hi, I tried to establish NCS call b/w 2 endpoints of same PacketCable MTA using asterisk-10.0.0. I observed that MDCX sent to aaln/1 contains its own SDP. Some I observed with aaln/2. So voice path is not established b/w aaln/1 and aaln/2. My Configurations: mgcp.cong: [mta84.globaledgesoft.com] host = mta84.globaledgesoft.com wcardep = aaln/* callwaiting = 1 ;canreinvite = 1 dtmfmode = rfc2833 ;amaflags = BILLING ncs = yes ; Use NCS 1.0 signalling ;pktcgatealloc = yes ; Allocate DQOS gate on CMTS ;hangupongateremove = yes ; Hangup the channel if the CMTS close the gate callerid = 3341 ;accountcode = test-3622622225 line = aaln/1 callerid = 3342 ;accountcode = test-3622622226 line = aaln/2 extension.conf: exten => 3341,1,Dial(MGCP/aaln/1 at mta84.globaledgesoft.com) exten => 3342,1,Dial(MGCP/aaln/2 at mta84.globaledgesoft.com) can anybody help me to resolve this issue. Regards Vikas