search for: mattgwatson

After an upgrade from asterisk 1.2.13 to 1.2.25 including upgrading libpri, zaptel, the incoming calls to a TDM400P REV I, with 3 FXO modules stop working. The board is working, I tested in another server with the 1.2.13 asterisk version. When a call is incoming, I do a ztmonitor to check the rx and tx values, but nothing appears on screen. Also changed the pci slot where the board is. The

Hi List; What configuration needed to let my FXS send and receive FAX? Regards Bilal

Hello, we want to setup the following scenario: - each user has a softphone AND a hardphone - the softphone is started with the operating system - the hardphone is connected all the time using SIP - only ONE extension for each user Both phones should ring when the user is called. We've setup an asterisk 1.4.18 and at the moment only the last registered client rings. In Asterisk 1.2 the

Anyone tried Asterisk with Fedora 9 (recent release)? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080519/d16cc79d/attachment.htm

Hi, We have a few Aastra 480ci phones and we've noticed that in order to get the phone to receive a call, qualify must be = no. Apparently the Aastras do not respond to the qualify message (or respond in a way Asterisk doesn't understand) and Asterisk thinks the phone is unreachable. However, this now prevents MWI from working properly on the phones. Does anyone know how to get MWI

Hi, Anyone know any decent trunk provider in Canada that can offer multiple channel trunks (16channels) via IAX or Sip trunking? Having some pleasant experience with IAXTEL out of Denver, though they don't offer services into Canada. Please let me know S.

...hough it may come back, but not as bad). Flip side, sometimes a good call that gets put on hold or transfered will have the issue when the call is picked up again. I've done rxgain tuning, although I can't be 100% sure I've done it right. I followed the advice from <http://www.mattgwatson.ca/2008/05/howto-tune-zaptel-dahdi-fxo-interfaces-on-asterisk-pbx/ >, but the levels he said to aim for cause me to need to raise my lines to between +12 and +20 and when listening to the tone on a phone sound as if they are starting to clip (although that could be correct for all I know...

Hello, all. I've come across a nasty problem just as we are ready to put our first system into production. During our final testing, we were plagued with several "invalid extension" or "password incorrect" messages when we knew the information entered was correct. Upon investigation, we saw that DTMF signals were occasionally but not consistently duplicated. We might

Hello, I would like to double check what Echo Cancellation my Digium Card uses. I thought I bought the little more expensive card that integrates EchoCancellation. How can I check? root at sn1:~# zaptel_hardware pci:0000:0b:08.0 wcte12xp+ d161:8000 Wildcard TE121 root at sn1:~# ztcfg -v Zaptel Version: SVN-branch-1.4-r4309 Echo Canceller: MG2 Is MG2 the correct one that I am supposed

I'm trying to get a Qwest PRI configured and working with my lab Asterisk server. They said that the switchtype is 5ess and the signaling is pri_cpe. My entries into zaptel.conf are: span=1,0,0,esf,b8zs bchan=1-23 dchan=24 loadzone = us defaultzone=us channels=1-23 And my entries in zapata.conf are: language=en context=telco-incoming switchtype=5ess signalling=pri_cpe

I am having a problem with a couple servers. They both have a Digium TE110P and a TDM04B card. I have setup the system so the TE110P uses channels 1-31 and the TDM04B 32-35. The problem is that when we reboot the server sometimes the TDM04B is recognized first and the TE110P second so the configuration fails. I do not know why this happens and to solve this I have to do a "service

Hello all, A client of us, is thinking to migrate their actual PBX to a Cisco CallManager. We want to sell him an asterisk box to complement the Cisco PBX. I think to use asterisk as a Voicemail server (Replazing the Cisco Unity) Has asterisk all the functionalities to replace a CIsco Unity server? Which functionalities Cisco Unity has than asterisk could cover? How could asterisk complement the

hi, there is T.38 fax gateway for asterisk http://bugs.digium.com/view.php?id=12931 please test it and report bugs for people from http://www.voip-info.org/wiki-Asterisk+T.38+Bounty if you still want donate t.38 development please contact me at cervajs at fpf.slu.cz --------------------------------------- Marek Cervenka =======================================

Hi, I have a client using Mitel 5212 phones in SIP mode with a 1.4.21.1 Asterisk server (and a couple of previous 1.4 versions). They're mostly happy with the combination except for this one issue. For incoming calls only, either originating from other local SIP phones or from a PRI, calls won't get bridged (remote party get's hung up) if the call is answer too quickly on the