search for: marvelled

I have a hardware here with 9 NICs (8 of them on-board) and I want to set up 8 NICs as real network interfaces, one for each xen domain. The 9th NIC should be Domain-0 which is working well. Currently I have only set up one domain which is running in bridged mode at the moment. I am currently trying to set up a second domain which uses eth2 but I didn''t succeed. I want to get the

Hi Team, We need freeradius-server-3.0.21 to be cross compiled for armv7 based Marvell switch. Toolchain: armv7-marvell-linux-gnueabi-LE_i686_20160226 host : arm-none-linux-gnueabi CC : arm-marvell-linux-gnueabi-gcc For that talloc is dependent library. Trying to cross compile talloc-2.3.1 to for our architecture with below command. ./configure --disable-python --enable-gccdeps

Hello, I'm trying to install CentOS 5.2 on an HP 6730s notebook. All's going well except for one little item -- the networking. Never thought I'd have trouble with an Ethernet adapter, so I didn't even check before buying this machine; it was cheap. The adapter is a Marvell Yukon 88E8042 PCI-E Fast Ethernet controller. I can't find a Linux driver for it except one that

Hello all, I've been on a real roller coaster ride getting a large virtual host up and running. One troublesome thing I've discovered (the hard way) is that the drivers for Marvell SAS/SATA chips still have a few problems. After Googling around quite a bit, I see a significant number of others have had similar issues, especially evident in the Ubuntu forums but also for a few

Jonathan Billings wrote: <snip> >> And *why* random NIC names? Quick, you've got servers from 5 >> manufacturers, of different ages... what's the NIC going to be called? >> Do names like enp5s0 offer any convenience to *anyone* not a hardware >> engineer? > > Unrelated to systemd. This actually started happening in RHEL6 with > the biosdevname

Hi, guys. I''ve been trying to use the pci-phantom command line options to xen so as to work around the hardware issue with the Marvell 88SE91xx SATA controllers in IOMMU ([Intel:] VT-d) mode, but I cannot seem to get my head around it. From having had a glance here: http://xenbits.xen.org/docs/unstable/misc/xen-command-line.html and in particular the syntax described as such:

Greetings list- I''ve got a server ''in the mail'' and I see now on the specsheet that it has Marvell Yukon 8056 NICs onboard. Since I cannot seem to find a HCL for Centos 5 or RHEL5 to help verify, I''d like to know if it works ''out of the box'' on CentOS 5.x or is there additional work to make it function (properly)? My searching has revealed

I'm new to the lists so sorry about any faux pas I may have made. Also I apologize for the length, but I wanted to be sure I covered most of the details. I'm trying to do a PXE install on an Intel 1435VP2 server machine. The PXE install has worked on all the older machines in the cluster, so I know PXE is working. However, these new Intel server machines only support PXE booting from

He Everyone, We found out that till version 3.02 the Yukon nic is supported after it gives code errors, i'm working a lot with ehtherboot via drbl / clonezilla, and together with Steven Shiau we ask you guys if you can arrange that the Yukon can be supported again. Our thanx in advance. Dave & Steven

I've got an Asus P5E3WSPro with 8 SATA ports and 8 disks attached. 6 disks are on one controller (and work perfectly) and 2 are on a second Marvell controller. FreeBSD sees the controller, but not the disks. If I move a working disk to the Marvell controller I can boot off it up to the stage of mounting root where it fails to see the disk. atacontrol shows: ATA channel 2: Master:

Hello, Marvel Yukon Gigabit Ethernet is supported by CentOS ? -- -- Devel in Precio http://www.pas-world.com

Hi, After upgrading to kernel 2.6.32-431.1.2.el6.x86_64 the messages below keep appearing in "/var/log/messages". -------------------------------------------------------------------------- ata16.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 ata16.00: irq_stat 0x40000001 scsi 16:0:0:0: [sg18] CDB: Read Capacity(10): 25 00 00 00 00 00 00 00 00 00 ata16.00: cmd

Bouncing a thread from the device drivers list: http://opensolaris.org/jive/thread.jspa?messageID=357176 Does anybody know if OpenSolaris will support this new Supermicro card, based on the Marvell 88SE6480 chipset? It''s a true PCI Express 8 port JBOD SAS/SATA controller with pricing apparently around $125. If it works with OpenSolaris it sounds pretty much perfect. --------------

I am having problems getting my 64-bit Debian Squeeze (Xen version 4.0, Linux Kernel 2.6.32) dom0 to recognize a harddrive connected to a secondary sata controller. My motherboard is a Gigabyte GA-X79-UP4 and has two sata controllers. The first is controlled by an Intel X79 chipset and the second is controlled by a Marvell 88SE9172 chip. During the initial install of Debian everything is fine and

Adjust drivers that support the 'FLOW_DISSECTOR_KEY_META' key to reject filters that try to match on the newly added layer 2 miss option. Add an extack message to clearly communicate the failure reason to user space. Example: # tc filter add dev swp1 egress pref 1 proto all flower skip_sw l2_miss true action drop Error: mlxsw_spectrum: Can't match on "l2_miss". We have

hello, I'd like know how to do to extract data from a frame for example how can I do to extract only the data where variety=victory or variety=golden rain thanks. > Oats Block Variety nitro yield 1 I Victory 0.0 111 2 I Victory 0.2 130 3 I Victory 0.4 157 4 I Victory 0.6 174 5 I Golden Rain 0.0 117 6 I Golden Rain

Oats[Oats$Variety %in% c("Victory", "Golden Rain"),] or subset(Oats, Variety %in% c("Victory", "Golden Rain")) Stefano -----Messaggio originale----- Da: r-help-bounces at stat.math.ethz.ch [mailto:r-help-bounces at stat.math.ethz.ch]Per conto di elyakhlifi mustapha Inviato: luned? 23 aprile 2007 9.56 A: R-help at stat.math.ethz.ch Oggetto: [R] extract from

My dd (sk98lin v7.09) supports 3c940 (Marvel/Syskonnect) which the stock v6.x drivers doesn't . Successfull tested on a Asus A-7N8X Deluxe with Marvell Gigabit Lan the dd is available at http://slackpkg.ath.cx/centos/disk/sk98lin/

Hello Satya, > RSTP daemon runs in application and stops the kernel stp and informs > to pass the packets to application layer. > RSTP daemon waits in raw socket with stp filter. > You just need to change the a bit code for port wise that all. ok thanks, do I need the DSA (Distributed Switch Architecture) driver support to distinguish from which port a frame arrived?

on an ASUS P5K-E wifi (wifi disabled in bios) board with: 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12) centos 5.1 did not configure the device. Anyone else see this or have a solution? Tried forcing sky2 module, but init just says device does not seem to be present even tho lspci shows it on the bus. Is there another kernel