search for: marvell

I have a hardware here with 9 NICs (8 of them on-board) and I want to set up 8 NICs as real network interfaces, one for each xen domain. The 9th NIC should be Domain-0 which is working well. Currently I have only set up one domain which is running in bridged mode at the moment. I am currently trying to set up a second domain which uses eth2 but I didn''t succeed. I want to get the

Hi Team, We need freeradius-server-3.0.21 to be cross compiled for armv7 based Marvell switch. Toolchain: armv7-marvell-linux-gnueabi-LE_i686_20160226 host : arm-none-linux-gnueabi CC : arm-marvell-linux-gnueabi-gcc For that talloc is dependent library. Trying to cross compile talloc-2.3.1 to for our architecture with below command. ./configure --disable-python --enable-gccdeps --s...

Hello, I'm trying to install CentOS 5.2 on an HP 6730s notebook. All's going well except for one little item -- the networking. Never thought I'd have trouble with an Ethernet adapter, so I didn't even check before buying this machine; it was cheap. The adapter is a Marvell Yukon 88E8042 PCI-E Fast Ethernet controller. I can't find a Linux driver for it except one that appears to require me to recompile a custom kernel. I find it on the Marvell website: http://www.marvell.com/drivers/search.do It looks like I'll have to recompile the kernel to get this ins...

Hello all, I've been on a real roller coaster ride getting a large virtual host up and running. One troublesome thing I've discovered (the hard way) is that the drivers for Marvell SAS/SATA chips still have a few problems. After Googling around quite a bit, I see a significant number of others have had similar issues, especially evident in the Ubuntu forums but also for a few RHEL/CentOS users. I have found that under heavy load (in my case, simply doing the initial sync...

Jonathan Billings wrote: <snip> >> And *why* random NIC names? Quick, you've got servers from 5 >> manufacturers, of different ages... what's the NIC going to be called? >> Do names like enp5s0 offer any convenience to *anyone* not a hardware >> engineer? > > Unrelated to systemd. This actually started happening in RHEL6 with > the biosdevname

Hi, guys. I''ve been trying to use the pci-phantom command line options to xen so as to work around the hardware issue with the Marvell 88SE91xx SATA controllers in IOMMU ([Intel:] VT-d) mode, but I cannot seem to get my head around it. From having had a glance here: http://xenbits.xen.org/docs/unstable/misc/xen-command-line.html and in particular the syntax described as such: pci-phantom =[<seg>:]<bus...

...ut I wanted to be sure I covered most of the details. I'm trying to do a PXE install on an Intel 1435VP2 server machine. The PXE install has worked on all the older machines in the cluster, so I know PXE is working. However, these new Intel server machines only support PXE booting from their Marvell NIC (I already tried getting the latest BIOS to avoid this hassle). Since the cluster is running open mosix, Centos 3.7 is which the latest which can be used. The kernel and initrd image in the isolinux directory (on cd or in the repos) has no driver for the Marvell NIC. lspci -n and lspci shows...

He Everyone, We found out that till version 3.02 the Yukon nic is supported after it gives code errors, i'm working a lot with ehtherboot via drbl / clonezilla, and together with Steven Shiau we ask you guys if you can arrange that the Yukon can be supported again. Our thanx in advance. Dave & Steven

I've got an Asus P5E3WSPro with 8 SATA ports and 8 disks attached. 6 disks are on one controller (and work perfectly) and 2 are on a second Marvell controller. FreeBSD sees the controller, but not the disks. If I move a working disk to the Marvell controller I can boot off it up to the stage of mounting root where it fails to see the disk. atacontrol shows: ATA channel 2: Master: no device present Slave: no device present...

Hello, Marvel Yukon Gigabit Ethernet is supported by CentOS ? -- -- Devel in Precio http://www.pas-world.com

...ta16: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata16.00: configured for UDMA/66 ata16: EH complete -------------------------------------------------------------------------- Output from "sginfo -i /dev/sg18" shows Command Queueing 0 Vendor: Marvell Product: 91xx Config Revision level: 1.01 This is an unused SATA chipset on a the motherboard, no devices are plugged into it. Also oddly I am getting [root at mach~]# sginfo -r /dev/scanner-sg18 /dev/scanner /dev/sdb /dev/sda "/dev/sdb" and "/dev/sda...

Bouncing a thread from the device drivers list: http://opensolaris.org/jive/thread.jspa?messageID=357176 Does anybody know if OpenSolaris will support this new Supermicro card, based on the Marvell 88SE6480 chipset? It''s a true PCI Express 8 port JBOD SAS/SATA controller with pricing apparently around $125. If it works with OpenSolaris it sounds pretty much perfect. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://mail.opensolaris.org/pipe...

...ems getting my 64-bit Debian Squeeze (Xen version 4.0, Linux Kernel 2.6.32) dom0 to recognize a harddrive connected to a secondary sata controller. My motherboard is a Gigabyte GA-X79-UP4 and has two sata controllers. The first is controlled by an Intel X79 chipset and the second is controlled by a Marvell 88SE9172 chip. During the initial install of Debian everything is fine and I can see harddrives attached to either controller. If I boot Xen from grub, I cannot see the harddrives on the Marvell chip, if I just boot the stock Debian kernel I can see the harddrives. The Marvell controller shows up i...

...to user space. Example: # tc filter add dev swp1 egress pref 1 proto all flower skip_sw l2_miss true action drop Error: mlxsw_spectrum: Can't match on "l2_miss". We have an error talking to the kernel Signed-off-by: Ido Schimmel <idosch at nvidia.com> --- .../net/ethernet/marvell/prestera/prestera_flower.c | 6 ++++++ drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 6 ++++++ drivers/net/ethernet/mellanox/mlxsw/spectrum_flower.c | 6 ++++++ drivers/net/ethernet/mscc/ocelot_flower.c | 10 ++++++++++ 4 files changed, 28 insertions(+) diff --git a/...

...k Variety nitro yield 1 I Victory 0.0 111 2 I Victory 0.2 130 3 I Victory 0.4 157 4 I Victory 0.6 174 5 I Golden Rain 0.0 117 6 I Golden Rain 0.2 114 7 I Golden Rain 0.4 161 8 I Golden Rain 0.6 141 9 I Marvellous 0.0 105 10 I Marvellous 0.2 140 11 I Marvellous 0.4 118 12 I Marvellous 0.6 156 13 II Victory 0.0 61 14 II Victory 0.2 91 15 II Victory 0.4 97 16 II Victory 0.6 100 17 II Golden Rain 0.0 70 18 II Golden Rain...

...k Variety nitro yield 1 I Victory 0.0 111 2 I Victory 0.2 130 3 I Victory 0.4 157 4 I Victory 0.6 174 5 I Golden Rain 0.0 117 6 I Golden Rain 0.2 114 7 I Golden Rain 0.4 161 8 I Golden Rain 0.6 141 9 I Marvellous 0.0 105 10 I Marvellous 0.2 140 11 I Marvellous 0.4 118 12 I Marvellous 0.6 156 13 II Victory 0.0 61 14 II Victory 0.2 91 15 II Victory 0.4 97 16 II Victory 0.6 100 17 II Golden Rain 0.0 70 18 II Golden Rain...

My dd (sk98lin v7.09) supports 3c940 (Marvel/Syskonnect) which the stock v6.x drivers doesn't . Successfull tested on a Asus A-7N8X Deluxe with Marvell Gigabit Lan the dd is available at http://slackpkg.ath.cx/centos/disk/sk98lin/

Hello Satya, > RSTP daemon runs in application and stops the kernel stp and informs > to pass the packets to application layer. > RSTP daemon waits in raw socket with stp filter. > You just need to change the a bit code for port wise that all. ok thanks, do I need the DSA (Distributed Switch Architecture) driver support to distinguish from which port a frame arrived?

on an ASUS P5K-E wifi (wifi disabled in bios) board with: 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12) centos 5.1 did not configure the device. Anyone else see this or have a solution? Tried forcing sky2 module, but init just says device does not seem to be present even tho lspci shows it on the bus. Is there another kern...

...0 disk:1 disk:2 disk:3 disk:4 disk:5 product: 88SE9172 SATA 6Gb/s Controller product: 7 Series/C210 Series Chipset Family 6-port SATA Controller disk:0 disk:1 disk:2 disk:3 disk:4 The relevant output from lspci is: 06:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller (rev 11) or for lspci -n : 06:00.0 0106: 1b4b:9172 (rev 11) From searching the web, I tried appending pci-phantom=06:00,1 as an argument to xen at boot time, but this did not result in the disks being visible. I based my attempted workaround...