search for: lsusb

On Sep 29, 2014, at 12:50 PM, Shade Alabsa <shade34321 at gmail.com> wrote: > The lsusb command did not trigger a disconnect. The output of that > command is below. If you run lsusb several times, does it still work? The exact output of lsusb isn't as important as whether anything gets logged by the kernel. Running lsusb shouldn't cause any extra kernel messages such as th...

Charles, > If you run lsusb several times, does it still work? The exact output of lsusb isn't as important as whether anything gets logged by the kernel. Running lsusb shouldn't cause any extra kernel messages such as the disconnection/reconnection messages shown here: Running lsusb seveeral times works...

Ok - before stale data: After stale data: $ lsusb -d 0665: Bus 002 Device 004: ID 0665:5161 Cypress Semiconductor USB to Serial After stale data: And the gzipped log attached: On 2 January 2015 at 21:56, Charles Lepple <clepple at gmail.com> wrote: > On Jan 2, 2015, at 2:43 PM, Mike Raath <raathm at gmail.com> wrote: > &...

...NV is supported - and I assumed that the "au" would not prevent this. I plugged in the USB to gather the information you requested. My intention was to use the serial connection and probably still is, though if there is a solution via USB - I would certainly consider it. I tried "lsusb -W" (as suggested) but this seems an invalid option so I assume you mean "lsusb -v" Below is the relevant part of the output from "lsusb -v". I had a look at the Belkin site recently - and it looks like the model after mine comes in a couple of flavours - and they provid...

...start upsdrvctl without the UPS plugged in I get [~] # /usr/bin/upsdrvctl start Network UPS Tools - UPS driver controller 2.4.1 Network UPS Tools - Megatec protocol driver 1.6 (2.4.1) Serial-over-USB transport layer 0.10 No supported devices found. Please check your device availability with 'lsusb' and make sure you have an up-to-date version of NUT. If this does not help, try running the driver with at least 'vendorid' and 'subdriver' options specified. Please refer to the man page for details about these options (man 8 megatec_usb). Please report your results to the NUT...

....04.1 Trusty Tahr Installed nut from Ubuntu repositories - nut 2.7.1 Ups.conf file maxretry = 3 # user = nut [TrippLite] driver = usbhid-ups port = auto productid = 3016 desc = "Tripp Lite UPS, USB Interface" Data from the usbhid-ups command Data from lsusb command fs00pc:~$ lsusb Bus 003 Device 002: ID 0bda:0111 Realtek Semiconductor Corp. RTS5111 Card Reader Controller Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 roo...

...mber: 2406CVLSM871900494 68.564231 - Bus: 004 68.564235 Trying to match device 68.564255 Device does not match - skipping Judging from the time, did the driver connect initially, or is it still trying to reconnect? (I haven't used "maxretry" before.) > Data from lsusb command > > fs00pc:~$ lsusb > Bus 003 Device 002: ID 0bda:0111 Realtek Semiconductor Corp. RTS5111 Card Reader Controller > Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 006 Device 001: ID 1d6...

Sorry, I messed up my reply a bit. The output of the lsusb command is the same before and after the data goes stale. $ lsusb -d 0665: Bus 002 Device 005: ID 0665:5161 Cypress Semiconductor USB to Serial And the output of the /lib/nut/nutdrv_qx -a apollo-ups -DD 2>&1 command is the same as in the previous attachment. I truncated the "before&q...

...tion feedback > in stepper driven machinery. Might see if the vfd has a power fail > alarm, its pretty smart. Nothing is ever done until the paper is > completed. > > Cheers, Gene Heskett Now I've got another of those WTF questions. This ups doesn't ID itself the same to an lsusb as it does to upsc. From an lsusb: Bus 001 Device 004: ID 0764:0501 Cyber Power System, Inc. CP1500 AVR UPS From a upsc: device.mfr: CPS device.model: CP625HGa ???? And while its not your problem, its keyboard and mouse goes away at random intervals, and isn't rediscovered by unplugging and...

...Could that > be the issue? The one I read about was TL MR3220. There is suggestion, that using > external USB hub would resolve the issue. > > -- > Virgo P?rna > virgo.parna at mail.ee Hello again, thanks for your reply. I plug a USB Hub in OpenWRT but there is nothing in "lsusb" and "dmesg". In a Debian server I have this: # lsusb ... Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 006: ID 1a40:0201 Terminus Technology Inc. FE 2.1 7-port Hub # dmesg ... [440927.420129] usb 1-3: new high-speed USB device number 6 using ehci_...

H all... I have an Astribank (8FXS/16FXO), IBM X3200 M2, Asterisk-1.6.2.1, dahdi-linux-complete-2.2.1, libpri-1.4.10.2, centos-5.4 final. My problem is, every time i unplug the astribank power supply, and reconnect it, astribank cannot work again (lsusb result is 11x0)... but, after reinstall the asterisk and dahdi, astribank will detected (lsusb result is 11x2)... any suggestion? Regard, frank. _________________________________________________________________ Windows Live: Friends get your Flickr, Yelp, and Digg updates when t...

Thanks Charles, This is the permission tree: # ls -l /dev/bus/usb/001/001 crw-r--r-- 1 root root 189, 0 Feb 8 20:23 /dev/bus/usb/001/001 If I attache the USB cable there is nothing in dmesg, and there is nothing in lsusb: # lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub It looks like it is not detected. In Debian it looks great: # lsusb Bus 004 Device 008: ID 0665:5161 Cypress Semiconductor USB to Serial USB drives works great, they are showed in dmesg and in lsusb. Regards. 2015-02-09 1...

On Jan 21, 2020, at 7:50 AM, Gene Heskett <gheskett at shentel.net> wrote: > > Now I've got another of those WTF questions. This ups doesn't ID itself > the same to an lsusb as it does to upsc. > From an lsusb: > Bus 001 Device 004: ID 0764:0501 Cyber Power System, Inc. CP1500 AVR UPS The two IDs are vendor (VID) and product (PID). lsusb looks them up in a text file, typically /usr/share/misc/usb.ids, and concatenates the vendor and product strings in the short...

...me. Part of the script is to detect USB drives and mount them. Previously, It worked something like isUsbDevice() { if [ -f /sys/block/$1/usb ] ; then // do stuff fi; } but I don't find the "usb" file/directory anywhere to be found any more on el6. I've tried the output of lsusb and lsusb -v but in no case have I been able to find anything there matching anything in /sys/block that matching anything in lsusb's output. Given an available drive (EG: /dev/sdk) how can I reliably tell it's interface type? (USB/SATA/PATA/SCSI ?)

On Jan 2, 2015, at 3:33 PM, Mike Raath <raathm at gmail.com> wrote: > Sorry, I messed up my reply a bit. > > The output of the lsusb command is the same before and after the data goes stale. > > $ lsusb -d 0665: > Bus 002 Device 005: ID 0665:5161 Cypress Semiconductor USB to Serial > OK. That usually means that the VM kernel doesn't see that the device is disconnecting. You can check dmesg to be sure, but the D...

...have Powercom WOW-525u UPS with usb cable as > pc communication. I have trouble using it under nut. My system is Arch > Linux (updated). I tried usbhid-ups and powercom. I was hoping that you > would like to help me solve this problem. Thank you very much for your > attention. > > lsusb output: > > Bus 004 Device 008: ID 0d9f:0001 Powercom Co., Ltd > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 1.00 > bDeviceClass 0 (Defined at Interface level) > bDeviceSubClass 0 > bDeviceProt...

Hi all, Do any of you know what the syntax would be is I wanted to add the first device listed using lsusb on my dom0 to my domU? lsusb; Bus 002 Device 004: ID 064f:0bd8 Some-Systems AB ABC/DE xm usb-add; Usage: xm usb-add <domain> <[host:bus.addr] [host:vendor_id:product_id]> Unsure what combo works, other then what doesn''t work. - Brian ______________________________...

Hello: I have a UPS model MXE II MAXIM brand online, 3500VA 2100W. Connects to the PC by a USB 2.0 port. I wanted to use nut, but this brand is not on the list of nut drivers. lsusb returns: ... Bus 003 Device 003: ID 06DA: 0201 Phoenixtec Power Co., Ltd ... I did not find this manufacturer in the driver list. Anyone know if you can have compatibility with other make and model of UPS. With what driver it could start testing? Greetings and thanks, Walter (original Spanish...

...ly, or is it still trying to > reconnect? (I haven't used "maxretry" before.) Tries to reconnect forever. It never initially connected. Maxretry was in the configuration file as a default of the new installation. I added from the user = nut to the end. > > > Data from lsusb command > > > > fs00pc:~$ lsusb > > Bus 003 Device 002: ID 0bda:0111 Realtek Semiconductor Corp. RTS5111 > > Card Reader Controller Bus 003 Device 001: ID 1d6b:0002 Linux > > Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0001 Linux > > Foundation 1.1 root h...

Greetings; I have the newest nut (nut-2.2.2-4.fc10.i386) from fedora 10 repos) installed and this ups (from lsusb -vv): Bus 001 Device 006: ID 050d:0751 Belkin Components Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0...