search for: logicaldr

...ome free time for me, can you send me the output of: hpacucli ctrl all show detail hpacucli ctrl slot=1 show config hpacucli ctrl slot=1 array all show hpacucli ctrl slot=1 array A show hpacucli ctrl slot=1 physicaldrive all show hpacucli ctrl slot=1 physicaldrive 2I:1:1 show hpacucli ctrl slot=1 logicaldrive all show hpacucli ctrl slot=1 logicaldrive 1 show Replace the slot=, array, physicaldrive and logicaldrive entries with what matches your specific setups (if possible, for all slots, arrays, physical and logical drives). I need as much as possible, normal working configurations and exotic set...

Hi, is there a way to rebuild an array using ssacli with a P410? A failed disk has been replaced and now the array is not rebuilding like it should: Array A (SATA, Unused Space: 1 MB) logicaldrive 1 (14.55 TB, RAID 1+0, Ready for Rebuild) physicaldrive 1I:0:1 (port 1I:box 0:bay 1, SATA HDD, 4 TB, OK) physicaldrive 1I:0:2 (port 1I:box 0:bay 2, SATA HDD, 4 TB, OK) physicaldrive 1I:0:3 (port 1I:box 0:bay 3, SATA HDD, 4 TB, OK) physicaldrive 1I:0:4 (port 1I:box 0:bay...

...ple prototype SAS SSDs on a HP P411 raid controller (I believe this is a rebranded LSI megaraid with HP firmware) and am trying to format them for best random IO performance with something like postgresql. so, I used the raid command tool to build a raid0 with 2 SAS SSDs # hpacucli ctrl slot=1 logicaldrive 3 show detail Smart Array P410 in Slot 1 array C Logical Drive: 3 Size: 186.3 GB Fault Tolerance: RAID 0 Heads: 255 Sectors Per Track: 32 Cylinders: 47869 Strip Size: 256 KB Status: OK Array Accelerator...

...devices allowed, and am wondering whether this might be a HW, FW or SW limitation if anyone knows. I want to run everything in JBOD mode and let Linux do the RAID. So for the first cabinet I ran this command 24 times to create a logical drive for each physical one /usr/StorMan/arcconf create 1 logicaldrive max volume 0,X noprompt Where X goes from 0 to 23 Went great, created /dev/sd[c-z] and I was able to use those with mdadm to create 4 x RAID6 arrays and then a big RAID0 out of the 4 x RAID6. Works great! Then I try to connect the 2nd cabinet and when I run the above arcconf command it tells...

Hello all, I am a complete newbie to OpenSolaris, and must to setup a ZFS NAS. I do have linux experience, but have never used ZFS. I have tried to install OpenSolaris Developer 134 on a 11TB HW RAID-5 virtual disk, but after the installation I can only use one 2TB disk, and I cannot partition the rest. I realize that maximum partition size is 2TB, but I guess the rest must be usable. For

...0 out of (see below). But then I mount it and it is way too small This should be about 20TB : [root at solexa1 StorMan]# df -h /dev/sdb1 Filesystem Size Used Avail Use% Mounted on /dev/sdb1 186G 60M 176G 1% /mnt/J4400-1 Here is how I created it : ./arcconf create 1 logicaldrive name J4400-1-RAID60 max 60 0 0 0 1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 10 0 11 0 12 0 13 0 14 0 15 0 16 0 17 0 18 0 19 0 20 0 21 0 22 0 23 noprompt [root at solexa1 StorMan]# ./arcconf getconfig 1 ld Controllers found: 1 ---------------------------------------------------------------------- Logic...

Am Fr., 6. Nov. 2020 um 00:52 Uhr schrieb hw <hw at gc-24.de>: > [...] > logicaldrive 1 (14.55 TB, RAID 1+0, Ready for Rebuild) > [...] Have you checked the rebuild priority: ? ssacli ctrl slot=0 show config detail | grep "Rebuild Priority" ~ Rebuild Priority: Medium ? Slot needs to be adjusted to your conf...

On Fri, 2020-11-06 at 12:08 +0100, Thomas Bendler wrote: > Am Fr., 6. Nov. 2020 um 00:52 Uhr schrieb hw <hw at gc-24.de>: > > > [...] > > logicaldrive 1 (14.55 TB, RAID 1+0, Ready for Rebuild) > > [...] > > Have you checked the rebuild priority: > > ? ssacli ctrl slot=0 show config detail | grep "Rebuild Priority" > ~ > Rebuild Priority: Medium > ?...