Hey folks,
I have a Sun J4400 SAS1 disk array with 24 x 1T drives in it connected
to a Sunfire x2250 running 5.8 ( 64 bit )
I used 'arcconf' to create a big RAID60 out of (see below).
But then I mount it and it is way too small
This should be about 20TB :
[root at solexa1 StorMan]# df -h /dev/sdb1
Filesystem Size Used Avail Use% Mounted on
/dev/sdb1 186G 60M 176G 1% /mnt/J4400-1
Here is how I created it :
./arcconf create 1 logicaldrive name J4400-1-RAID60 max 60 0 0 0 1 0 2
0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 10 0 11 0 12 0 13 0 14 0 15 0 16 0 17 0
18 0 19 0 20 0 21 0 22 0 23 noprompt
[root at solexa1 StorMan]# ./arcconf getconfig 1 ld
Controllers found: 1
----------------------------------------------------------------------
Logical device information
----------------------------------------------------------------------
Logical device number 0
Logical device name : J4400-1-RAID60
RAID level : 60 XOR
Status of logical device : Impacted
Size : 19066880 MB
Stripe-unit size : 256 KB
Read-cache mode : Enabled
Write-cache mode : Enabled (write-back)
Write-cache setting : Enabled (write-back)
when protected by battery
Partitioned : Yes
Protected by Hot-Spare : No
Bootable : Yes
Failed stripes : No
--------------------------------------------------------
Logical device segment information
--------------------------------------------------------
Group 0, Segment 0 : Present (0,0) 9QJ3ZAYQ
Group 0, Segment 1 : Present (0,1) 9QJ3ZP3Y
Group 0, Segment 2 : Present (0,2) 9QJ3X7GR
Group 0, Segment 3 : Present (0,3) 9QJ3XJQW
Group 0, Segment 4 : Present (0,4) 9QJ3TPK2
Group 0, Segment 5 : Present (0,5) 9QJ40PHP
Group 0, Segment 6 : Present (0,6) GTE002PBHJEDBE
Group 0, Segment 7 : Present (0,7) 9QJ3ZHE0
Group 0, Segment 8 : Present (0,8) 9QJ3Z053
Group 0, Segment 9 : Present (0,9) 9QJ3ZEX6
Group 0, Segment 10 : Present (0,10) 9QJ33XGG
Group 0, Segment 11 : Present (0,11) 9QJ3X88X
Group 1, Segment 0 : Present (0,12) 9QJ3YLR2
Group 1, Segment 1 : Present (0,13) GTE002PBHHNVZE
Group 1, Segment 2 : Present (0,14) 9QJ3ZGM2
Group 1, Segment 3 : Present (0,15) GTE002PBGP9VZE
Group 1, Segment 4 : Present (0,16) 9QJ3ZB4X
Group 1, Segment 5 : Present (0,17) 9QJ3ZAE0
Group 1, Segment 6 : Present (0,18) 9QJ3Y8C8
Group 1, Segment 7 : Present (0,19) GTE002PBH30GKE
Group 1, Segment 8 : Present (0,20) GTE002PAKXKDPE
Group 1, Segment 9 : Present (0,21) 9QJ3VXEL
Group 1, Segment 10 : Present (0,22) 9QJ3W4W6
Group 1, Segment 11 : Present (0,23) 9QJ3TPGR
Make 1 big partition :
sfdisk /dev/sdb <<EOF
,,L
EOF
[root at solexa1 StorMan]# sfdisk -l /dev/sdb
Disk /dev/sdb: 2430685 cylinders, 255 heads, 63 sectors/track
Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0
Device Boot Start End #cyls #blocks Id System
/dev/sdb1 0+ 24540- 24541- 197124430 83 Linux
/dev/sdb2 0 - 0 0 0 Empty
/dev/sdb3 0 - 0 0 0 Empty
/dev/sdb4 0 - 0 0 0 Empty
And then make an ext4 filesystem on that :
[root at solexa1 StorMan]# mke4fs /dev/sdb1
mke4fs 1.41.12 (17-May-2010)
Filesystem labelOS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
12320768 inodes, 49281107 blocks
2464055 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=4294967296
1504 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624, 11239424, 20480000, 23887872
Writing inode tables: done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 30 mounts or
180 days, whichever comes first. Use tune4fs -c or -i to override.
--
?Don't eat anything you've ever seen advertised on TV?
? ? ? ?? - Michael Pollan, author of "In Defense of Food"