search for: lnkc

...sole): ... Welcome to CentOS Starting udev: udev: starting version 147 piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0 e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI e1000: Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 e1000 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, high) -> IRQ 11 e1000 0000:00:03.0: eth0: (PCI:33MHz:32-bit) 00:16:3e:52:e3:0b e1000 0000:00:03.0: eth0: Intel(R) PRO/1000 Network Connection Any suggestions on where to start looking?

...4-bit kernel (2.6.18-164.el5 [x86_64]) I get: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19 ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [LNKC] -> GSI 19 (level, low) -> IRQ 177 0000:01:0a.0: ttyS2 at I/O 0xd080 (irq = 177) is a 16550A 0000:01:0a.0: ttyS3 at I/O 0xd000 (irq = 177) is a 16550A ACPI: PCI Interrupt 0000:01:0a.1[A] -> Link [LNKC] -> GSI 19 (l...

...xs module autoload, then install the module with modprobe, asterisk works just fine. If I boot the machine and autoload the wcfxs module, the module loads fine: > Jan 11 11:06:55 asterisk Zapata Telephony Interface Registered on major 196 > Jan 11 11:06:55 asterisk ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 > Jan 11 11:06:55 asterisk PCI: setting IRQ 10 as level-triggered > Jan 11 11:06:55 asterisk ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 > Jan 11 11:06:55 asterisk Freshmaker version: 73 > Jan 11 11:06:55 asterisk Fresh...

...laves: 04) 3 channels to configure. Setting echocan for channel 1 to oslec Setting echocan for channel 2 to oslec Setting echocan for channel 4 to oslec From dmesg: dahdi: Telephony Interface Registered on major 196 [ 9.849036] dahdi: Version: 2.5.0.1 [ 9.899531] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19 [ 9.899919] wctdm 0000:01:0a.0: PCI INT A -> Link[LNKC] -> GSI 19 (level, low) -> IRQ 19 [ 9.901845] Freshmaker version: 73 [ 9.902565] Freshmaker passed register test [ 11.287170] Module 0: Installed -- AUTO FXS/DPO [ 12.172362] Module 1: Installed -- AUTO...

Today I updated several servers running CentOS 4.3, and got the new 2.6.9-42 kernel. One of the machines serves as our firewall. After rebooting I lost all forwarding thru the machine. I reverted back to the 2.6.9-34 kernel and connectivity returned. During the few minutes that the new kernel was running I checked that the routing table looked OK, and with tcpdump I saw that indeed no traffic

At the risk of angering the crash Gods, my sustem has NOT crashed again since I downgraded the kernel from 2.6.18-1.2239.fc5 to 2.6.18-1.2200.fc5. Given that newfound stability, and my lack of time, I'm going to put on hold any further diagnostics, until the next kernel revision is released. I have submitted a report at bugzilla.redhat.com (bug 218128). (Ah, nuts; accidentally created a

...OAPIC for interrupt routing [ 0.127508] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.135161] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.135193] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.135226] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.135257] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15) [ 0.135288] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.135320] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0 [ 0.135351] ACPI: PCI...

...most of the values should be bogus because we are not really zaptel loadzone=nl defaultzone=nl span=1,1,3,ccs,ami bchan=1-2 dchan=3 dmesg snippet: Zapata Telephony Interface Registered on major 196 PCI: Enabling device 0000:00:0d.0 (0000 -> 0003) ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xd0864f00 fifo 0xca778000(0xa778000) IRQ 10 HZ 1000 zaphfc: Card 0 configured for NT mode zaphfc: 1 hfc-pci card(s) in this box. Registered tone zone 3 (Netherlands) Any Ideas? TIA /ralph

...river FDC 0 is a S82078B RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) HP CISS Driver (v 3.6.10) Intel(R) PRO/1000 Network Driver - version 7.1.9-k4 Copyright (c) 1999-2006 Intel Corporation. (XEN) PCI add device 00:03.0 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 11 (level, high) -> IRQ 11 e1000: 0000:00:03.0: e1000_probe: (PCI:33MHz:32-bit) 52:46:03:00:04:01 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection pcnet32.c:v1.32 18.Mar.2006 tsbogend@alpha.franken.d...

...river FDC 0 is a S82078B RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) HP CISS Driver (v 3.6.10) Intel(R) PRO/1000 Network Driver - version 7.1.9-k4 Copyright (c) 1999-2006 Intel Corporation. (XEN) PCI add device 00:03.0 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 11 (level, high) -> IRQ 11 e1000: 0000:00:03.0: e1000_probe: (PCI:33MHz:32-bit) 52:46:03:00:04:01 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection pcnet32.c:v1.32 18.Mar.2006 tsbogend@alpha.franken.d...

...ps://storage.googleapis.com/syzbot-assets/708d1f638584/vmlinux-a1b6b102.xz > > IMPORTANT: if you fix the issue, please add the following tag to the commit: > Reported-by: syzbot+4d0c5794bff07852726c at syzkaller.appspotmail.com > > ACPI: button: Sleep Button [SLPF] > ACPI: \_SB_.LNKC: Enabled at IRQ 11 > virtio-pci 0000:00:03.0: virtio_pci: leaving for legacy driver > ACPI: \_SB_.LNKD: Enabled at IRQ 10 > virtio-pci 0000:00:04.0: virtio_pci: leaving for legacy driver > ACPI: \_SB_.LNKB: Enabled at IRQ 10 > virtio-pci 0000:00:06.0: virtio_pci: leaving for legacy d...

...1F.DTS3.DTS4 0690: 08 10 8b aa 02 5f 53 42 5f 08 50 52 30 30 12 43 ....._SB_.PR00.C 06a0: 1b 1e 12 0d 04 0c ff ff 1f 00 00 4c 4e 4b 46 00 ...........LNKF. 06b0: 12 0d 04 0c ff ff 1f 00 01 4c 4e 4b 44 00 12 0e .........LNKD... 06c0: 04 0c ff ff 1f 00 0a 02 4c 4e 4b 43 00 12 0e 04 ........LNKC.... 06d0: 0c ff ff 1f 00 0a 03 4c 4e 4b 41 00 12 0d 04 0c .......LNKA..... 06e0: ff ff 1d 00 00 4c 4e 4b 48 00 12 0d 04 0c ff ff .....LNKH....... 06f0: 1a 00 00 4c 4e 4b 41 00 12 0d 04 0c ff ff 1b 00 ...LNKA......... 0700: 00 4c 4e 4b 47 00 12 0d 04 0c ff ff 18 00 00 4c .LNKG..........L...

...CPI: Subsystem revision 20050309 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 *5 10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 *10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 10 *11) ACPI: PCI Root Bridge [PCI1] (0000:08) PCI: Probing PCI hardware (bus 08) xen_mem: Initialising balloon driver. SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn''t work, try "pci=route...

...0._PRT] ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5...

...:1002] type 00 class 0x00ff00 > > [ 1.721499] pci 0000:00:05.0: reg 0x10: [io 0xc080-0xc09f] > > [ 1.728430] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) > > [ 1.729565] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) > > [ 1.730332] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) > > [ 1.731157] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) > > [ 1.731921] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) > > [ 1.733477] ACPI: Enabled 16 GPEs in block 00 to 0F > > [ 1.734272] SCSI subsystem initialized > > [ 1.734701]...

...318865408 (304 MB) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <GBT AWRDACPI> on motherboard acpi0: Power Button (fixed) pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0 pci_link1: <ACPI PCI Link LNKB> on acpi0 pci_link2: <ACPI PCI Link LNKC> irq 5 on acpi0 pci_link3: <ACPI PCI Link LNKD> irq 10 on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0x4000-0x4041,0x5000-0x500f on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82443BX...

...0000:00:05.0: [1af4:1002] type 00 class 0x00ff00 > [ 1.721499] pci 0000:00:05.0: reg 0x10: [io 0xc080-0xc09f] > [ 1.728430] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) > [ 1.729565] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) > [ 1.730332] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) > [ 1.731157] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) > [ 1.731921] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) > [ 1.733477] ACPI: Enabled 16 GPEs in block 00 to 0F > [ 1.734272] SCSI subsystem initialized > [ 1.734701] libata version 3.00 loade...

...0000:00:05.0: [1af4:1002] type 00 class 0x00ff00 > [ 1.721499] pci 0000:00:05.0: reg 0x10: [io 0xc080-0xc09f] > [ 1.728430] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) > [ 1.729565] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) > [ 1.730332] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) > [ 1.731157] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) > [ 1.731921] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) > [ 1.733477] ACPI: Enabled 16 GPEs in block 00 to 0F > [ 1.734272] SCSI subsystem initialized > [ 1.734701] libata version 3.00 loade...

...63f] claimed by > PIIX4 ACPI > [ 0.165564] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB > [ 0.223140] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) > [ 0.223712] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) > [ 0.224245] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) > [ 0.224789] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) > [ 0.225296] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) > [ 0.225817] ACPI: Enabled 2 GPEs in block 00 to 0F > [ 0.226262] vgaarb: loaded > [ 0.227000] SCSI subsystem initialized > [ 0...

Hi, Updated to current bk today, and my machine stopped booting ... I''ve tracked it down to the apic changes from end of last week. cset 1.1307 boots fine, 1.1308 doesn''t. Diff of the boot messages is below. Full logs are also attached. Gerd --- log-1.1307 2005-04-21 14:40:57.372885027 +0200 +++ log-1.1308 2005-04-21 14:38:52.236553392 +0200 @@ -7,7 +7,7 @@