search for: link0

...ms with this, or don't even support it. The errors look like this: fxp0: SCB timeout: 0x10 0x0 0x80 0x0 fxp0: SCB timeout: 0x10 0x0 0x80 0x0 fxp0: DMA timeout ... repeated ... Attempted workarounds which don't work to un-wedge the chip: Reload the fxp0 microcode with "ifconfig fxp0 link0" Forcibly unloading the kernel module and reloading it Unpatching and repatching at the switch (a cheap 10/100 one) Enabling and disabling promiscuous mode Twiddling dev.fxp.0.noflow The link status looks fine, but the card will not send or receive traffic. A warm reboot was enough to get...

...SAMBA and NFS. Is it normal? FreeBSD 7.1-PRERELEASE #0: Sat Sep 6 01:52:12 CEST 2008 fxp0: <Intel 82801DB (ICH4) Pro/100 Ethernet> port 0xc800-0xc83f mem 0xe1021000-0xe1021fff irq 20 at device 8.0 on pci1 # ifconfig fxp0 fxp0: flags=9843<UP,BROADCAST,RUNNING,SIMPLEX,LINK0,MULTICAST> metric 0 mtu 1500 options=8<VLAN_MTU> ether 00:20:ed:42:87:13 inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255 media: Ethernet autoselect (100baseTX <full-duplex>) status: active BTW overall SAMBA...

Hi all I've very big problem with my nfsd server. I'm running FreeBSD-stable and sometime (one time/week) i've this kind of message on the console : bge0 watchdog timeout problems fxp1 watchdog timeout problems and all my network card is down. Nothing can make the network card work again (only reboot working). There are only one service I need on this server and

...y.y.1.1 -> y.y.1.5 Jun 25 13:48:47 <daemon.info> cap mpd: [pptp0] IFACE: Up event Jun 25 13:48:47 <daemon.info> cap mpd: [pptp0] setting interface ng0 MTU to 1196 bytes Jun 25 13:48:47 <daemon.info> cap mpd: [pptp0] exec: /sbin/ifconfig ng0 y.y.1.1 y.y.1.5 netmask 0xffffffff -link0 Jun 25 13:48:47 <daemon.info> cap mpd: [pptp0] exec: /sbin/route add y.y.1.1 -iface lo0 Jun 25 13:48:47 <daemon.info> cap mpd: [pptp0] IFACE: Up event And my route table now has this added on: y.y.1.1 lo0 UHS 0 0 lo0 y.y.1.5 192.168.1.1...

...RR128- WRR256- > Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff > Status: NegoPending- InProgress- > Capabilities: [140 v1] Root Complex Link > Desc: PortNumber=02 ComponentID=01 EltType=Config > Link0: Desc: TargetPort=00 TargetComponent=01 > AssocRCRB- LinkType=MemMapped LinkValid+ > Addr: 00000000fed19000 > Capabilities: [d94 v1] Secondary PCI Express <?> > Kernel driver in use: pcieport > 00: 86 80 01 19 07 00 10 00 05 00 04 06...

...Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff > > > Status: NegoPending- InProgress- > > > Capabilities: [140 v1] Root Complex Link > > > Desc: PortNumber=02 ComponentID=01 EltType=Config > > > Link0: Desc: TargetPort=00 TargetComponent=01 > > > AssocRCRB- LinkType=MemMapped LinkValid+ > > > Addr: 00000000fed19000 > > > Capabilities: [d94 v1] Secondary PCI Express <?> > > > Kernel driver in use: pcieport >...

...ixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending+ InProgress- Capabilities: [140 v1] Root Complex Link Desc: PortNumber=02 ComponentID=01 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed19000 Capabilities: [d94 v1] Secondary PCI Express <?> Kernel driver in use: pcieport 00: 86 80 01 19 07 00 10 00 05 00 04 06 00 00 81 00 10: 00 00 00 00...

...In particular, connecting a 4.8-REL machine to a 5.1-REL machine leads to some interesting situations: I can do simple pings across the link, but ssh fails, and heavy pings crash the 4.8 machine. Similarly changing the interface configuration with ifconfig tends to crash the 4.8 machine (mtu, link0, up/down, etc). The behaviour is somewhat hard to diagnose, since there's no panic - just a hard lock. The 4.8-R machine: $ uname -a FreeBSD quadric.dsl.isometry.net 4.8-RELEASE FreeBSD 4.8-RELEASE #0: Sun Apr 6 19:46:37 UTC 2003 root@quadric.dsl.isometry.net:/usr/obj/usr/src/sys/QUADRIC...

...WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Capabilities: [140 v1] Root Complex Link Desc: PortNumber=02 ComponentID=01 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed19000 Capabilities: [d94 v1] Secondary PCI Express <?> Kernel driver in use: pcieport 00: 86 80 01 19 07 00 10 00 05 00 04 06 00 00 81 00 10: 00 00 00...

...Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff > > Status: NegoPending- InProgress- > > Capabilities: [140 v1] Root Complex Link > > Desc: PortNumber=02 ComponentID=01 EltType=Config > > Link0: Desc: TargetPort=00 TargetComponent=01 > > AssocRCRB- LinkType=MemMapped LinkValid+ > > Addr: 00000000fed19000 > > Capabilities: [d94 v1] Secondary PCI Express <?> > > Kernel driver in use: pcieport > > 00: 86 80 01 1...

...ID=0 ArbSelect=Fixed TC/VC=ff > > > > Status: NegoPending- InProgress- > > > > Capabilities: [140 v1] Root Complex Link > > > > Desc: PortNumber=02 ComponentID=01 EltType=Config > > > > Link0: Desc: TargetPort=00 TargetComponent=01 > > > > AssocRCRB- LinkType=MemMapped LinkValid+ > > > > Addr: 00000000fed19000 > > > > Capabilities: [d94 v1] Secondary PCI Express <?> > > > > Kernel driver i...

I have some questions about what needs tuned on a high traffic syslog box. I seem to be dropping quite a few syslog packets. This is a syslog server for a high usage Firewall btw. Nic is a Compaq tl0 4.8-P13 netstat -s -p udp | grep buf 19,762,079 dropped due to full socket buffers uptime 5:28PM up 7 days, 18:30, 2 users, load averages: 0.21, 0.23, 0.23 I though maybe syslogd was the

...OK [pptp1] IPCP: SendConfigAck #8 IPADDR 10.77.1.50 [pptp1] IPCP: state change Ack-Rcvd --> Opened [pptp1] IPCP: LayerUp 10.77.1.2 -> 10.77.1.50 [pptp1] IFACE: Up event [pptp1] setting interface ng0 MTU to 1256 bytes [pptp1] exec: /sbin/ifconfig ng0 10.77.1.2 10.77.1.50 netmask 0xffffffff -link0 [pptp1] no interface to proxy arp on for 10.77.1.50 [pptp1] exec: /sbin/route add 10.77.1.2 -iface lo0 [pptp1] IFACE: Up event

...nProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Capabilities: [140 v1] Root Complex Link Desc: PortNumber=02 ComponentID=01 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed19000 Kernel driver in use: pcieport Kernel modules: shpchp 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) Subsystem: Dell Pre...

Greetings, I am resending this as it doesn't appear in the archives and no one responded...maybe it got routed to /dev/null or something :-) I have asked this question the Scientific Linux mailing list (a few months ago) and got the suggestion I talk to the kernel guys. I pinged a kernel guy I know, and his suggestion was to ask the Nouveau list. So here I am. :-) I have had my work laptop

On Tue, May 21, 2019 at 03:28:48PM +0200, Karol Herbst wrote: > On Tue, May 21, 2019 at 3:11 PM Bjorn Helgaas <helgaas at kernel.org> wrote: > > On Tue, May 21, 2019 at 12:30:38AM +0200, Karol Herbst wrote: > > > On Mon, May 20, 2019 at 11:20 PM Bjorn Helgaas <helgaas at kernel.org> wrote: > > > > On Tue, May 07, 2019 at 10:12:45PM +0200, Karol Herbst

Dear best guys, I really love 5.3 in many ways but here're some unbelievable transfer rates, after I went out and bought a pair of Intel GigaBit Ethernet Cards to solve my performance problem (*laugh*): (In short, see *** below) Tests were done with two Intel GigaBit Ethernet cards (82547EI, 32bit PCI Desktop adapter MT) connected directly without a switch/hub and "device

...RR128- > WRR256- > Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff > Status: NegoPending- InProgress- > Capabilities: [180 v1] Root Complex Link > Desc: PortNumber=01 ComponentID=00 EltType=Config > Link0: Desc: TargetPort=00 TargetComponent=00 > AssocRCRB- LinkType=MemMapped LinkValid+ > Addr: 00000000fed1c000 > Kernel driver in use: pcieport > > 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI > Express Root Port 5 (prog-if 00 [...