search for: layne

...f: # /etc/nut/ups.conf pollinterval = 1 [ups] driver = usbhid-ups port = auto desc = "Tripp Lite SMART1500LCD" vendorid = 09ae productid = 2012 And I also removed MTP as it was trying to take the device. sudo apt-get remove --auto-remove libmtp-common On Mon, Dec 9, 2019 at 10:04 PM Layne Fowler <layne.fowler at gmail.com> wrote: > Charles, thank you for that link to David's earlier message. I tried > adding those udev rules and changing the pollinterval. I need to do some > tinkering but I don't think the part RUN+="/sbin/upsdrvctl stop; > /sbin/upsd...

...rmation I can help with, let me know. David Zomaya Tripp Lite ________________________________ From: Nut-upsuser <nut-upsuser-bounces+david_zomaya=tripplite.com at alioth-lists.debian.net> on behalf of Charles Lepple <clepple at gmail.com> Sent: Sunday, December 8, 2019 8:36 PM To: Layne Fowler Cc: nut-upsuser Subject: [EXTERNAL] Re: [Nut-upsuser] Tripp Lite SMART1500LCD repeatedly disconnecting and reconnecting This is an EXTERNAL email. Please take a moment and think before clicking any links or opening any attachments from this email. If suspicious, please forward to ishelpdesk...

Thanks Ken. I'll plan to sit down and look up the protocol information over the next week or so and follow up. ________________________________ From: Ken Olum <kdo at cosmos.phy.tufts.edu> Sent: Tuesday, January 14, 2020 1:35:10 PM To: David Zomaya Cc: kdo at cosmos.phy.tufts.edu; layne.fowler at gmail.com; nut-upsuser at alioth-lists.debian.net Subject: [EXTERNAL] Re: [Nut-upsuser] Tripp Lite SMART1500LCD will not stay shut down when power is disconnected This is an EXTERNAL email. Please take a moment and think before clicking any links or opening any attachments from this ema...

...e answers for and I can look into it. Thank you, David Zomaya Tripp Lite david_zomaya at tripplite.com -----Original Message----- From: Nut-upsuser <nut-upsuser-bounces+david_zomaya=tripplite.com at alioth-lists.debian.net> On Behalf Of Ken Olum Sent: Tuesday, January 14, 2020 11:24 AM To: Layne Fowler <layne.fowler at gmail.com> Cc: nut-upsuser at alioth-lists.debian.net Subject: [EXTERNAL] Re: [Nut-upsuser] Tripp Lite SMART1500LCD will not stay shut down when power is disconnected This is an EXTERNAL email. Please take a moment and think before clicking any links or opening any a...

...tools/nut/blob/master/drivers/usbhid-ups.c#L562 This might be a dumb question but did this require you to recompile the kernel? These types of changes are way beyond my depth. Thank you for the direction! On Thu, Jan 2, 2020, 11:38 AM Ken Olum <kdo at cosmos.phy.tufts.edu> wrote: > Hi, Layne. I had a similar problem with my Tripp-Lite BCPERS450. You > can see the previous correspondence by searching for > > site:alioth-lists.debian.net/pipermail/nut-upsuser BCPERS450 shutdown > > with Google. > > In particular, I fixed (well, worked around) the problem, as I wrot...

...s model, I don't know. But at least this behavior is not catastrophic like before. I suppose I can live with this edge case bug. Thank you for your help again! I don't know if my methods are perfect but just in case anyone has the same issue, here is the change I made: https://github.com/Laynezilla/nut/commit/ce3fcd0533e66b8be4adcf63ea0a63a7c45ba024 And here are the commands I used: sudo apt update sudo apt install devscripts git mk-build-deps nut --install --root-cmd sudo --remove sudo apt remove asciidoc cd ~/ git clone https://github.com/Laynezilla/nut.git cd ~/nut ./autogen.sh ./co...

...------------------------------------------------------------------ > *From:* Nut-upsuser > <nut-upsuser-bounces+david_zomaya=tripplite.com at alioth-lists.debian.net> > on behalf of Charles Lepple <clepple at gmail.com> > *Sent:* Sunday, December 8, 2019 8:36 PM > *To:* Layne Fowler > *Cc:* nut-upsuser > *Subject:* [EXTERNAL] Re: [Nut-upsuser] Tripp Lite SMART1500LCD > repeatedly disconnecting and reconnecting > This is an *EXTERNAL* email. Please take a moment and think before > clicking any links or opening any attachments from this email. If > su...

...any information on the Spcmdr package. This has included searching the full R search site (Jonathan Baron and U. Penn) and looking under the RGUI's and Rgeo pages. Does anyone know what the package 'Spcmdr' is and where I can find either the package or documentation about it? Larry Layne ljlayne at unm.edu

...ounces+david_zomaya=tripplite.com at alioth-lists.debian.net> > <nut-upsuser-bounces+david_zomaya=tripplite.com at alioth-lists.debian.net> > on behalf of Charles Lepple <clepple at gmail.com> <clepple at gmail.com> > *Sent:* Sunday, December 8, 2019 8:36 PM > *To:* Layne Fowler > *Cc:* nut-upsuser > *Subject:* [EXTERNAL] Re: [Nut-upsuser] Tripp Lite SMART1500LCD > repeatedly disconnecting and reconnecting > > This is an *EXTERNAL* email. Please take a moment and think before > clicking any links or opening any attachments from this email. If >...

...> > Tripp Lite > > > ------------------------------ > *From:* Nut-upsuser <nut-upsuser-bounces+david_zomaya= > tripplite.com at alioth-lists.debian.net> on behalf of Charles Lepple < > clepple at gmail.com> > *Sent:* Sunday, December 8, 2019 8:36 PM > *To:* Layne Fowler > *Cc:* nut-upsuser > *Subject:* [EXTERNAL] Re: [Nut-upsuser] Tripp Lite SMART1500LCD > repeatedly disconnecting and reconnecting > > This is an *EXTERNAL* email. Please take a moment and think before > clicking any links or opening any attachments from this email. If >...

Hello, Does anyone test ZFS on Linux and ACLs? I can't setup POSIX ACLs and any extended even using acl_xattr or acl_tdb. Is any way to use ACLs with ZFS on Linux (Samba 3 or 4)? Best regards /Adrian Berlin --

...sit down and look up the protocol information over the next > week or so and follow up. > ------------------------------ > *From:* Ken Olum <kdo at cosmos.phy.tufts.edu> > *Sent:* Tuesday, January 14, 2020 1:35:10 PM > *To:* David Zomaya > *Cc:* kdo at cosmos.phy.tufts.edu; layne.fowler at gmail.com; > nut-upsuser at alioth-lists.debian.net > *Subject:* [EXTERNAL] Re: [Nut-upsuser] Tripp Lite SMART1500LCD will not > stay shut down when power is disconnected > > This is an EXTERNAL email. Please take a moment and think before clicking > any links or openin...

On Dec 8, 2019, at 5:46 PM, Layne Fowler <layne.fowler at gmail.com> wrote: > > My UPS is connected to a Raspberry Pi by USB. After a few hours of working, the service fails. Looking at kernel messages I noticed that the device is repeatedly disconnecting and reconnecting. > > I have tried using a different USB...

From: Layne Fowler <layne.fowler at gmail.com> Date: Fri, 3 Jan 2020 16:22:10 -0500 I see, so you kept the load.on.delay command but removed the check to see if it was handled. Did you do the same thing for the shutdown.stayoff logic? I didn't, because I don't use that functionality, t...

Hi, David. Thanks for the offer of help. I have BCPERS450 serial number 2701DVHBC809300177. Unfortunately I'm about to go on a trip and will be away until the end of the month, so I don't have much time to discuss these things at the moment, but maybe Layne will have something to say. My understanding from when I was working on this a couple years ago is that the main problem in getting NUT working right with Tripp-Lite equipment is to understand the mappings of the various controls. For example, we have ReportID: 0x15, which maps to UPS.OutletSyste...

...id <- data.frame(u,v,z) is.data.frame(reggrid) wireframe(z~u*v,reggrid,scales=list(arrows=FALSE),drape=TRUE,colorkey=TRUE) Does anyone have any insight on this? In addition, I would also like to do what Alexander is trying to do, which is create a wireframe from irregular lattice data. Larry Layne

Full_Name: Larry Layne Version: 2.4.0 OS: MS Windows 2000 Submission from: (NULL) (129.24.91.249) All of the following libraries loaded just fine in version 2.3.1: > utils:::menuInstallLocal() package 'tripack' successfully unpacked and MD5 sums checked updating HTML package descriptions > library(tripac...

My UPS is connected to a Raspberry Pi by USB. After a few hours of working, the service fails. Looking at kernel messages I noticed that the device is repeatedly disconnecting and reconnecting. I have tried using a different USB port and using a brand new USB cable. I have not had success by changing config parameters like pollfreq/pollinterval/etc. What is causing the UPS to keep disconnecting?

Layne Fowler writes: > On Mon, Dec 9, 2019 at 12:58 AM Marco Walther > <<URL:mailto:marco at sonic.net>marco at sonic.net> wrote: > > Lite information I can help with, let me know. > > We had that discussion about the SMART1500LCDT  & USB a long time ago:-( I Di...

Hi, Layne. I had a similar problem with my Tripp-Lite BCPERS450. You can see the previous correspondence by searching for site:alioth-lists.debian.net/pipermail/nut-upsuser BCPERS450 shutdown with Google. In particular, I fixed (well, worked around) the problem, as I wrote in https://alioth-lists.debian...